Abstract:There is growing demand for high-power devices, wide bandgap SiC and GaN semiconductor materials in semiconductor market, and a drive to integrate die attach materials that can replace lead-containing solders. However, epoxy-based and solder materials face challenges to meet high thermal conductivity and survive elevated working temperatures. Pressure-assisted silver sintering has overcome these challenges, but downsides of pressure-assisted silver sintering are that it requires special equipment and for some applications, packages are unable to withstand the pressure required to facilitate sintering. Pressureless sintering materials could be processed using the same equipment as traditional die attach adhesives. It develops strong metal bonds to substrates, providing high thermal conductivity and withstanding high temperatures. However, compared to pressure-assisted sintering, pressureless materials may have difficulties to form a dense bondline structure if the formulation design is not optimized. Moreover, once the sintered structure is built during cure, further bondline reduction may induce additional stress. Therefore, it is critical that the pressureless sintering material’s mechanical properties are formulated to effectively manage stress and pass all reliability testing – especially for automotive packages. This paper will present the findings from a study that evaluated the impact of various formulation components – such as silver packing and resin chemistry – on the mechanical properties and interfacial bonding of pressureless sintering die attach adhesives. The effect on in-package reliability performance was also investigated to better understand material properties that can pass reliability testing while maintaining high thermal and electrical conductivity adhesive requirements.

Brief review of silver sinter-bonding processing for packaging high-temperature power devices

Review of Laser Sintering of Nanosilver Pastes for Die Attachment: Technologies and Trends

Recent Progress in Rapid Sintering of Nanosilver for Electronics Applications

Mechanical Characterization of Sintered Silver Materials for Power Device Packaging: A Review

Infrared Radiation-Assisted Non-Pressure Sintering of Micron-Sized Silver for Power Electronic Packaging

Review of Die-Attach Materials for SiC High-Temperature Packaging

Low Temperature Sintered Silver Nanoflake Paste for Power Device Packaging and Its Anisotropic Sintering Mechanism

Low-temperature and pressureless sintering technology for high-performance and hightemperature interconnection of semiconductor devices

Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection

Microstructural and Mechanical Evolution of Silver Sintering Die Attach for SiC Power Devices During High Temperature Applications

Highly Robust, Pressureless Silver Sinter-Bonding Technology Using PMMA Combustion for Power Semiconductor Applications

Residual Stress and Warping Analysis of the Nano-Silver Pressureless Sintering Process in SiC Power Device Packaging

High-Pressure-Assisted Large-Area (>2400 mm2) Sintered-Silver Substrate Bonding for SiC Power Module Packaging

Low-Temperature Sintering of Nanoscale Silver Pastes for High-Performance and Highly-Reliable Device Interconnection

Emerging Lead-Free, High-Temperature Die-Attach Technology Enabled By Low-Temperature Sintering Of Nanoscale Silver Pastes

Review on Shear Strength and Reliability of Nanoparticle Sintered Joints for Power Electronics Packaging

Enhancing Semiconductor Package Reliability through Mechanical Property Optimization of Pressureless Sintering Die Attach Adhesives

Enhanced pressureless bonding by Tin Doped Silver Paste at low sintering temperature

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Enhanced Sintered Silver for SiC Wide Bandgap Power Electronics Integrated Package Module

Present status and prospects of nano-silver particles in the electronic field: a review