Abstract:Impact monitoring is an important research topic within aircraft structural health monitoring. Piezoelectric lead zirconate titanate (PZT) ceramics are commonly used as sensors for detecting impact stress waves. However, due to their brittleness, high density, small ultimate strain, and poor impact resistance, PZT ceramics are severely limited in impact monitoring on curved surface structures. In this study, a novel 0–3 PZT/Silicone resin flexible piezoelectric composite sensor (PZT/SR-FPCS) was developed. It serves as an excellent candidate for an aircraft structural impact monitoring sensor. The developed PZT/SR-FPCS has an elastic modulus of 34.2 MPa lower than that of PVDF. Its yield failure strain of 7.2 % and fatigue failure strain of 9200 με are significantly higher than those observed in typical aircraft structures. The strain sensitivity ranges from about 8.51 mV/με to 9.81 mV/με, and the Lamb wave signal can still be correctly detected in a high-temperature environment of 75 °C. To investigate the potential of PZT/SR-FPCS for impact monitoring, the stress wave sensing theory of PZT/SR-FPC is derived. Both FEA and experimental studies demonstrate that the dominant energy narrow-band of the impact stress wave in the plate structure is the A 0 mode Lamb wave. The impact source localization method based on the arrival time difference and wave velocity of the dominant energy narrow-band is proposed, and the impact source localization verification experiments are carried out on a curved structure using PZT/SR-FPCS. As proven by the experiment, impact source localization results coincide with the actual impact location. The study shows that the developed PZT/SR-FPCS and the proposed impact source localization method are both feasible and effective.

NUMERICAL SIMULATION ON IMPACT MONITORING OF COMPOSITE STRUCTURES BASED ON PIEZOELECTRIC SENSORS

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Finite Element Simulation and Piezoelectric Sensor Array-Driven Two-Stage Impact Location on Composite Structures

Experimental Study on Impact Force Identification of Ship-Bridge Collision Using Smart Piezoelectric Sensors

Finite Difference Based Electrical Modeling and Vibration Control Simulation of Piezoelectric Structronic Plate System

Flexible piezoelectric composite sensor for impact monitoring of curved structures

Three-Dimensional Semianalytical Solutions For Piezoelectric Laminates Subjected To Underwater Shocks

Numerical Analysis for A Crack in Piezoelectric Material under Impact

Experimental Research on Shear Failure Monitoring of Composite Rocks Using Piezoelectric Active Sensing Approach

Assessment of Fatigue Damage of Prefabricated Concrete Composite Beams with Piezomagnetic Signal

Impact Damage Detection in Composite Laminates Using PVDF and PZT Sensor Signals

Spatially Filtered Multi-Field Responses of Piezothermoelastic Cylindrical Shell Composites

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Three-dimensional Finite Element Analysis Based Electromechanical Impedance Model and Its Application

High-frequency Emi Signatures for Damaged Plates Using Finite Element Method

Analysis of Dynamic Properties of Piezoelectric Structure under Impact Load

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

Numerical Simulation of Output Response of PVDF Sensor Attached on a Cantilever Beam Subjected to Impact Loading

Analysis of Flexural Vibrations of a Piezoelectric Semiconductor Nanoplate Driven by a Time-Harmonic Force

Damage assessment of smart polymer-matrix sandwich composite using multi-physics responses of in-situ piezoelectric transducers

Quantification of damage expansion influence on frequency response function of plate for structural health monitoring with integral differential method