Abstract:Summary Proppant flowback from hydraulic fracturing is widespread and costly due to erosion and/or blockage of producing hydrocarbons as proppant may accumulate downhole. Several strategies have been applied to avoid or minimize proppant flowback, such as treatment optimization to maximize pack stability, resin-coated proppant, limiting drawdown, or letting it flow to deal with the consequences later. Another strategy to avoid proppant flowback is to install sand control equipment integrated into a sliding sleeve device (SSD) as part of the completion string. Although the presence of sand control equipment can mitigate the problem, it raises concern about erosion during fracturing. Although some installations have been successful, one is known to have experienced sand control failure. This study aimed to understand the effect of hydraulic fracturing on the erosion of completion equipment with an objective of improving the design to, as much as possible, prevent erosion failure. Computational fluid dynamics (CFD) was used to evaluate the root cause and identify more robust design solutions. The first step was to identify the most probable causes of sand control failure during multistage fracturing (MSF) in openhole (OH) horizontals. The as-is completion was then modeled, along with the screen, SSD, fracturing port, and OH isolation packer. Because the fracture location between two packers is unknown, and the fracturing port was located between multiple screen/SSD assemblies, annular flow across the assembly in both directions was considered. State-of-the-art CFD simulations were then performed on the installed design using actual flow conditions (rates, slurry properties, treatment time) from the failed installation. A new quasidynamic mesh (QDM) methodology was developed, which yielded more realistic (albeit still conservative) erosion-depth predictions. The results revealed areas for improving the design of key components of the 10-ksi-rated system, and CFD was rerun to confirm erosion resistance targets. Design modifications were implemented, and improved products were then manufactured and field tested. For a new 15-ksi design, particle–particle interaction was added to the CFD analysis. The results of the CFD analysis and field test are presented herein.

Experimental Study on Deteriorated Performance, Vibration, and Geometry Changes of an Electrical Submersible Pump Under Sand Water Flow Condition

Effects of Particle Erosion on the Submersible Pump in an Ultra-High Voltage Transformer

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Experimental Study on Submerged Sand Erosion through a Slot on a Defective Pipe

A Numerical Study of Turbulence Model and Rebound Model Effect on Erosion Simulations in an Electrical Submersible Pump (ESP)

An experimental insight into dynamic characteristics and wear of centrifugal pump handling multi-size particulate slurry

Study on Internal Flow Characteristics and Abrasive Wear of Pelton Turbine in Sand Laden Water

A Study of the Relationship between Sand Movement and Flow Field Distribution and Wear Causes in a Multiphase Pump

Slurry Flow And Erosion Prediction In A Centrifugal Pump After Long-Term Operation

Research on the Influence of Symmetrical Installation of Blade on the Sediment Erosion in a Multi-Stage Centrifugal Pump

Study on Wear Characteristics of a Guide Vane Centrifugal Pump Based on CFD–DEM

Abrasive Erosion Pattern Analysis for Impeller Blades of a Slurry Pump Used in Sand Dredging

Investigation on wear induced by solid-liquid two-phase flow in a centrifugal pump based on EDEM-Fluent coupling method

Experimental and Numerical Study of Hydraulic Characteristics and Pressurization Deterioration Mechanism of a Three-Stage Mixed-Flow Electrical Submersible Pump Under Gas-Liquid Condition

Wear Failure Mechanism and Main Influencing Factors of All-Metal Progressing Cavity Pump AMPCP

Research on Wear Properties of Centrifugal Dredge Pump Based on Liquid-Solid Two-Phase Fluid Simulations

Numerical Studies of Abrasion Wear on the Guide Vanes in a Submersible Axial Flow Pump

Quantifying Erosion of Downhole Solids Control Equipment during Openhole, Multistage Fracturing

EROSION WEAR AND PERFORMANCE SIMULATION OF CENTRIFUGAL PUMP FOR SOLID-LIQUID FLOW

Study on Erosive Wear and Novel Wear-Resistant Materials for Centrifugal Slurry Pumps

Numerical Simulation and Experimental Study on Sediment Wear of Fixed Guide Vanes of Hydraulic Turbines in Muddy River Based on Discrete Phase Model