Abstract:Mechanical metamaterials are man-made rationally-designed structures that present unprecedented mechanical properties not found in nature. One of the most well-known mechanical metamaterials is auxetics, which demonstrates negative Poisson’s ratio (NPR) behavior that is very beneficial in several industrial applications. In this study, a specific type of auxetic metamaterial structure namely idealized 3D re-entrant structure is studied analytically, numerically, and experimentally. The noted structure is constructed of three types of struts—one loaded purely axially and two loaded simultaneously flexurally and axially, which are inclined and are spatially defined by angles θ and φ. Analytical relationships for elastic modulus, yield stress, and Poisson’s ratio of the 3D re-entrant unit cell are derived based on two well-known beam theories namely Euler–Bernoulli and Timoshenko. Moreover, two finite element approaches one based on beam elements and one based on volumetric elements are implemented. Furthermore, several specimens are additively manufactured (3D printed) and tested under compression. The analytical results had good agreement with the experimental results on the one hand and the volumetric finite element model results on the other hand. Moreover, the effect of various geometrical parameters on the mechanical properties of the structure was studied, and the results demonstrated that angle θ (related to tension-dominated struts) has the highest influence on the sign of Poisson’s ratio and its extent, while angle φ (related to compression-dominated struts) has the lowest influence on the Poisson’s ratio. Nevertheless, the compression-dominated struts (defined by angle φ) provide strength and stiffness for the structure. The results also demonstrated that the structure could have zero Poisson’s ratio for a specific range of θ and φ angles. Finally, a lightened 3D re-entrant structure is introduced, and its results are compared to those of the idealized 3D re-entrant structure.

Structural Mechanics of cylindrical fish-cell zero Poisson’s ratio metamaterials

Design and characterization of novel bi-directional auxetic cubic and cylindrical metamaterials

A 3D Re-Entrant Structural Metamaterial with Negative Poisson’s Ratio Reinforced by Adding Arrow Structures

Achieving Anisotropy in Metamaterials Made of Dielectric Cylindrical Rods

3D-Printed Programmable Mechanical Metamaterials for Vibration Isolation and Buckling Control

Design of broad quasi-zero stiffness platform metamaterials for vibration isolation

Ordered Deformation Localization in Cellular Mechanical Metamaterials

An Unusual 3D Metamaterial with Zero Poisson's Ratio in Partial Directions

Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study

3D auxetic mechanical metamaterials: an analytical, numerical, and experimental study

A Modified Three-Dimensional Negative-Poisson-Ratio Metal Metamaterial Lattice Structure

Mechanical properties characterization and zero Poisson’s ratio design for perforated auxetic metamaterial by computational homogenized method

Topology optimization design of microstructures with zero Poisson's ratio

Graded metastructure design for linearly auxetic deformation under tension: From 2D honeycombs to 3D truncated cones

3D metamaterial with stiffness and Poisson's ratio approaching negative infinity

A novel 3D polygonal double-negative mechanical metamaterial with negative stiffness and negative Poisson's ratio

Innovative 3D chiral metamaterials under large deformation: Theoretical and experimental analysis

A novel 3D Z-shape design of compression-twist coupling metamaterial

Experimental and numerical investigation of zero Poisson’s ratio structures achieved by topological design and 3D printing of SCF/PA

Folding to Curved Surfaces: A Generalized Design Method and Mechanics of Origami-Based Cylindrical Structures

Mechanics Characteristics of a 3D Star-Shaped Negative Poisson's Ratio Composite Structure