Abstract:Precipitate redistribution and texture evolution are usually two concurrent aspects accompanying grain refinement induced by various surface treatment. However, the detailed precipitate redistribution characteristics and process, as well as crystallographic texture in the surface refined grain layer, are still far from full understanding. In this study, we focused on the microstructural and crystallographic features of the sliding friction treatment (SFT) induced surface deformation layer in a 7050 aluminum alloy. With the combination of transmission electron microscopy (TEM) and high angle angular dark field scanning TEM (HAADF-STEM) observations, a surface ultrafine grain (UFG) layer composed of both equiaxed and lamellar ultrafine grains and decorated by high density of coarse grain boundary precipitates (GBPs) were revealed. Further precession electron diffraction (PED) assisted orientation mapping unraveled that high angle grain boundaries rather than low angle grain boundaries are the most favorable nucleation sites for GBPs. The prominent precipitate redistribution can be divided into three successive and interrelated stages, i.e. the mechanically induced precipitate dissolution, solute diffusion and reprecipitation. The quantitative prediction based on pipe diffusion along dislocations and grain boundary diffusion proved the distribution feasibility of GBPs around UFGs. Based on PED and electron backscatter diffraction (EBSD) analyses, the crystallographic texture of the surface UFG layer was identified as a shear texture composed of major rotated cube texture {001} 〈110〉 and minor {111} 〈112〉, while that of the adjoining lamellar coarse grained matrix was pure brass. The SFT induced surface severe shear deformation is responsible for texture evolution.

Mechanical Behavior and Strengthening Mechanisms in Precipitation-Strengthened Aluminum Alloy with Gradient Structure Induced by Sliding Friction Treatment

Preparing Gradient Microstructure to Achieve Enhanced Performance in GH4586 Superalloy: Experiments and Models

Microstructure, microtexture and precipitation in the ultrafine-grained surface layer of an Al-Zn-Mg-Cu alloy processed by sliding friction treatment

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Study on Microstructure Evolution Mechanism of Gradient Structure Surface of AA7075 Aluminum Alloy by Ultrasonic Surface Rolling Treatment

The Gradient Structure in the Surface Layer of an Al-Zn-Mg-Cu Alloy Subjected to Sliding Friction Treatment

Enhanced fatigue performance of aluminum alloy through surface strengthening treatment

Achieving superior strength and ductility in 7075 aluminum alloy through the design of multi-gradient nanostructure by ultrasonic surface rolling and aging

Microstructural Evolution, Precipitation and Mechanical Properties of Ultrafine-Grained and Coarse-Grained 2024 Aluminum Alloys Fabricated by Powder Metallurgy

Surface Gradient Nanostructures in High Speed Machined 7055 Aluminum Alloy

Quantitative study on the correlation between microstructure and mechanical properties of additive friction stir deposited

Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation

Investigation of mechanical properties and microstructural evolution in Cu─Al alloys with gradient structure

On the Competition between Intergranular and Transgranular Failure within 7xxx Al Alloys with Tailored Microstructures

Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy

Suppress Defect-Induced Plastic Instability to Achieve Superior Strength-Ductility Combination of Spray Formed 7050 Al Alloy

Microstructure Evolution, Mechanical Properties and Deformation Characteristics of Ultrafine-Grained Annealed Pure Aluminum

Microstructure Evolution and Strengthening Mechanisms of an Additive Friction Stir Deposited Multi-Layer Al-Mg-Sc-Zr Alloy

Dynamic Evolution of Fine Grained Structure and Superplasticity of 7075 Aluminum Alloy

Strengthening mechanisms of a heterostructured pure aluminum with extraordinary mechanical properties

Microstructure evolution and mechanical properties of an ultrahigh strength Al-Zn-Mg-Cu-Zr-Sc (7055) alloy processed by modified powder hot extrusion with post aging