Abstract:The AC voltage control of a DC/DC converter based on the modular multilevel converter (MMC) is considered under normal operation and during a local DC fault. By actively setting the AC voltage according to the two DC voltages of the DC/DC converter, the modulation index can be near unity, and the DC voltage is effectively utilized to output higher AC voltage. This significantly decreases submodule (SM) capacitance and conduction losses of the DC/DC converter, yielding reduced capital cost, volume, and higher efficiency. Additionally, the AC voltage is limited in the controllable range of both the MMCs in the DC/DC converter; thus, over-modulation and uncontrolled currents are actively avoided. The AC voltage control of the DC/DC converter during local DC faults, i.e., standby operation, is also proposed, where only the MMC connected on the faulty cable is blocked, while the other MMC remains operational with zero AC voltage output. Thus, the capacitor voltages can be regulated at the rated value and the decrease of the SM capacitor voltages after the blocking of the DC/DC converter is avoided. Moreover, the fault can still be isolated as quickly as the conventional approach, where both MMCs are blocked and the DC/DC converter is not exposed to the risk of overcurrent. The proposed AC voltage control strategy is assessed in a three-terminal high-voltage direct current (HVDC) system incorporating a DC/DC converter, and the simulation results confirm its feasibility.

On Converter Fault Tolerance in MMC-HVDC Systems: A Comprehensive Survey

The Evolution and Variation of Sub-Module Topologies with DC-fault Current Clearing Capability in MMC-HVDC

Fault Diagnosis and Fault-tolerant Control of Modular Multi-level Converter High-voltage DC System: A Review

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

Fault-Tolerant Control of Medium-Voltage Modular Multilevel Converters with Minimum Performance Degradation under Submodule Failures

Redundancy Fault-tolerated Control Strategy for Sub-module Faults of Modular Multilevel Converters

Introduction, Modeling and Simulation of Modular Multilevel Converter

Fault Characteristics and Control Strategies of Multiterminal High Voltage Direct Current Transmission Based on Modular Multilevel Converter

Unified Strategy for Fault-Tolerant Operation of MMC with Multiple SMs Failure Based on SMs Grouping Management

Fault-tolerant Design and Control of Modular Multilevel Converter-Based STATCOM

A Novel Submodule Level Fault-Tolerant Approach for MMC With Integrated Scale-Up Architecture

A Fault Tolerant Control For Modular Multilevel Converter Under Submodule Fault Conditions

Ac Voltage Control of Dc/Dc Converters Based on Modular Multilevel Converters in Multi-Terminal High-Voltage Direct Current Transmission Systems

Fault-tolerant strategy for modular multilevel converter with nearest level modulation in HVDC system

Model and control of the DC–DC modular multilevel converter with DC fault tolerance

Control of modular multilevel converter based HVDC systems during asymmetrical grid faults

Design and Operation of A Hybrid Modular Multilevel Converter

Recent Advancements in Submodule Topologies and Applications of MMC

Fault Diagnosis and Tolerant Control of Single Igbt Open-Circuit Failure in Modular Multilevel Converters

A comprehensive review of fault diagnosis and fault-tolerant control techniques for modular multi-level converters