Ultra-Broadband Compact Polarization Beam Splitter Based on Asymmetric Etched Directional Coupler

Simei Mao,Lirong Cheng,Xin Mu,Sailong Wu,H. Y. Fu

DOI: https://doi.org/10.1364/cleopr.2020.c12h_1

2020-01-01

Abstract:We propose an ultra-broadband polarization beam splitter with 4.6 pm coupling length. Extinction ratio over 10 dB and insertion loss less than 1 dB are achieved over bandwidth of 420 nm centred at 1460 nm.

What problem does this paper attempt to address?

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Qinghuan Xu,Jifang Tao,Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Chuanning Niu,Xun Li,Weiping Huang

DOI: https://doi.org/10.1016/j.optcom.2019.124424

IF: 2.4

2020-01-01

Optics Communications

Abstract:A high-performance polarizing beam splitter (PBS) is demonstrated by using asymmetrical directional couplers on a 220nm-thick silicon-on-insulator (SOI) photonics platform. The extinction ratio of the PBS with cascaded directional couplers is > 35 dB for both TE and TM polarizations around the central wavelength of 1550 nm. The bandwidths for an extinction ratio of 20 dB and 30 dB are 275 nm and 230 nm, respectively, for TE polarization, as well as > 300 nm and 225 nm, respectively, for TM polarization. The insertion losses for TE polarization are < 0.5 dB with a bandwidth of > 300 nm. The insertion losses for TM polarization are < 1 dB and < 0.5 dB with a bandwidth of 218 nm and 174 nm, respectively.
Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Qinghuan Xu,Jifang Tao,Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Xun Li

DOI: https://doi.org/10.1109/jphot.2019.2950572

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:A high-performance broadband polarization-independent directional coupler is designed by using asymmetric-waveguides configuration on a silicon-on-insulator platform. Through the design of cascaded directional couplers, the coupling characteristics of the light with the orthogonally polarized transverse electric (TE) and transverse magnetic (TM) can be manipulated, so that the coupling strength could be equivalent between TE and TM polarizations within an ultra-broadband. Couplers with 50% splitting ratio are designed and simulated for operating in the wavelength range from 1450 nm to 1650 nm for both polarizations. Within the 100 nm wavelength range from 1500 nm to 1600 nm, the deviations of splitting ratio for TE polarization and TM polarization are ±3.3% and ±6.2%, respectively. And within the 200 nm wavelength range from 1450 nm to 1650 nm, the deviations for TE polarization and TM polarization are ±9.0% and ±7.8%, respectively. The footprint of this polarization-independent directional coupler is only 21 μm × 1.6 μm.
Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Weiwei Chen,Bohao Zhang,Pengjun Wang,Shixun Dai,Wei Liang,Hongxiang Li,Qiang Fu,Jun Li,Yan Li,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1364/oe.408432

IF: 3.8

2020-01-01

Optics Express

Abstract:In this paper, an on-chip silicon polarization beam splitter using a particle-swarm-optimized counter-tapered directional coupler is proposed, designed, and fabricated. The coupling length of the proposed device is only 5 µm. As the waveguide width variation ΔW increases from -20 to 20 nm, the simulated polarization extinction ratio larger than 18.67 dB and the corresponding insertion loss lower than 0.17 dB are achieved. Measured experimental results achieved insertion loss <0.50 dB, TE polarization extinction between 16.68 to 31.87 dB, TM polarization extinction between 17.78 to 31.13 dB, over the wavelength range 1525 to 1600 nm.
Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Yuxiao Liu,Hongxiang Li,Weiwei Chen,Pengjun Wang,Shixun Dai,Bohao Zhang,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1016/j.optcom.2020.126670

IF: 2.4

2021-01-01

Optics Communications

Abstract:In this paper, a polarization beam splitter using a pixelated directional coupler is proposed, designed, and experimentally demonstrated on silicon-on-insulator platform. According to the phase matching, structural parameters for the coupling region consisting of a straight waveguide and a pixelated waveguide are carefully selected by using direct-binary-search optimization algorithm and the finite difference time domain method, and thus the input fundamental transverse-magnetic and transverse-electric modes can be effectively separated from each other in an ultra-compact coupling length. The coupling length of our designed device is only 6 pm. Experimental results reveal that, the measured polarization extinction ratio is greater than 14.22 dB and the corresponding insertion loss is smaller than 1.36 dB within a bandwidth from 1527 to 1580 nm for the fabricated device operating in transverse-electric polarization, while the measured polarization extinction ratio and insertion loss are respectively larger than 14.47 dB and lower than 1.53 dB from 1527 to 1580 nm for the fabricated device operating in transverse-magnetic polarization.
Ultra-Broadband And Ultra-Compact Polarization Beam Splitter Based On A Tapered Subwavelength-Grating Waveguide And Slot Waveguide

Simei Mao,Lirong Cheng,Caiyue Zhao,H. Y. Fu

DOI: https://doi.org/10.1364/OE.434417

IF: 3.8

2021-01-01

Optics Express

Abstract:In this work, we propose an ultra-broadband and ultra-compact polarization beam splitter (PBS) on a standard silicon-on-isolator platform. Assisted by a tapered subwavelength-grating waveguide and a slot waveguide, the working bandwidth of the directional-coupler-based PBS covers the entire O-, E-, S-, C-, L- and U-bands and the coupling length is only 4.6 mu m. The insertion losses (ILs) of the device are simulated to be less than 0.8 dB and the extinction ratios (ERs) are larger than 10.9 dB at the wavelength range of 1260-1680 nm for both TE and TM polarizations. The experimental results show the average ILs are less than 1 dB for both polarizations at our measured wavelength ranges, which are consistent with the simulation results. It has the largest 1-dB bandwidth among all the reported broadband PBSs to the best of our knowledge. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Ultra-short Silicon Polarization Beam Splitter Based on an Asymmetrical Bent Directional Coupler

Jian Wang,Di Liang,Yongbo Tang,Daoxin Dai,John E. Bowers

DOI: https://doi.org/10.1364/acpc.2012.ath1b.5

2012-01-01

Abstract:An ultra-short (L=9.5μm) polarization beam splitter (PBS) based on an asymmetrical bent directional coupler is demonstrated experimentally. The measured extinction ratios are about 15dB and 10dB for the TE and TM polarized lights around 1550nm.
Ultrashort Broadband Polarization Beam Splitter Based on an Asymmetrical Directional Coupler.

Daoxin Dai,Zhi Wang,John E. Bowers

DOI: https://doi.org/10.1364/ol.36.002590

IF: 3.6

2011-01-01

Optics Letters

Abstract:An ultrashort polarization beam splitter (PBS) based on an asymmetrical directional coupler is proposed by utilizing the evanescent coupling between a strip-nanowire and a nanoslot waveguide. In order to be convenient for integration with other components, mode converters between the nanoslot waveguide and the strip-nanowire are introduced and merged into S-bends to achieve an ultracompact PBS. As an example a 6.9 μm long PBS based on a silicon-on-insulator platform is designed, and the length of the coupling region is as small as 1.3 μm. Numerical simulations show that the present PBS has a very broad band (>160 nm) for an extinction ratio of >10 dB.
Ultra-compact broadband polarization beam splitter with strong expansibility

Jie Huang,Junbo Yang,Dingbo Chen,Xin He,Yunxin Han,Jingjing Zhang,Zhaojian Zhang

DOI: https://doi.org/10.1364/PRJ.6.000574

IF: 7.6

2018-01-01

Photonics Research

Abstract:Based on the traditional directional coupler, we proposed a scheme to design on-chip polarization beam splitters using an inverse design method. In our scheme, the coupling area of the designed devices are only 0.48 μm×6.4 μm. By manipulating the refractive index of the coupling region, the devices can work in C-band, L-band, O-band, or any other communication band. Different from conventional design methods, which need to adjust the design parameters artificially, if the initial conditions are determined, the proposed scheme can automatically adjust the design parameters of devices according to specific requirements. The simulation results show that the insertion losses of the designed polarization beam splitters can be less than 0.4 dB (0.35 dB) for TE (TM) mode at the wavelengths of 1310, 1550, and 1600 nm, and the extinction ratios are larger than 19.9 dB for the TE and TM modes at all three wavelengths. Besides, the extinction ratios of both polarization states are more than 14.5 dB within the wavelength range of 1286–1364 nm, 1497–1568 nm, and 1553–1634 nm. At the same time, the insertion losses are smaller than 0.46 dB.
An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Shisong Luo,Dongning Liu,Jiaquan Kong,Zengkai Shao,Zeru Wu,Pengfei Xu,Guoxuan Zhu,Yi Wang,Lin Liu,Yanfeng Zhang,Yujie Chen,Siyuan Yu

DOI: https://doi.org/10.1364/acpc.2017.s3d.5

2017-01-01

Abstract:An asymmetrical SiNx-based polarization beam splitter at 810 nm are proposed and fabricated in this work. The simulation results show that the extinction ratio of > 20 dB and the insertion loss of < 0.6 dB can be achieved for both transverse-electric (TE) and transverse magnetic (TM) polarizations at 810 nm.
Ultra-broadband and Low-loss Polarization Beam Splitter on Silicon

Chenlei Li,Daoxin Dai,John E. Bowers

DOI: https://doi.org/10.1364/OFC.2020.Th1A.4

2020-01-01

Abstract:We realized a polarization beam splitter with low loss of <1 dB and high extinction ratio of >20 dB in an ultra-broad bandwidth from 1400nm to 1700mn using a pair of cascaded dual-core adiabatic tapers. (C) 2020 The Author(s)
Research on a Broadband Compact Polarization Beam Splitter

Zhibin Wang,Xuwei Hou,Zhengyang Li,Jiutian Zhang

DOI: https://doi.org/10.1007/s10946-024-10190-w

IF: 0.81

2024-03-16

Journal of Russian Laser Research

Abstract:Many devices based on silicon and other photonic integrated circuit platforms exhibit significant polarization dependence. Polarization beam splitter (PBS) is a device that split optical signals into transverse electric (TE) and transverse magnetic (TM) modes. Among various PBSs, asymmetric directional couplers are widely used due to their fine performance, but their working bandwidth is limited due to wavelength changes that can lead to deviations in effective refractive index and coupling strength. We propose a PBS, which uses metamaterial anisotropy to replace structural asymmetry and break the bandwidth bottleneck. It achieves good performance in the wavelength range of 258 nm, where the extinction ratio of the TM polarization is greater than 24 dB and that of the TE polarization is greater than 26 dB. It covers the E, S, C, L, and U bands, and the coupling area is as small as 7.25×2.625 μm, with a total device footprint of 15.65×6.125 μm.

optics
High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Yong Zhang,Yu He,Jiayang Wu,Xinhong Jiang,Ruili Liu,Ciyuan Qiu,Xiaoqing Jiang,Jianyi Yang,Christine Tremblay,Yikai Su

DOI: https://doi.org/10.1364/oe.24.006586

IF: 3.8

2016-01-01

Optics Express

Abstract:We demonstrate a compact silicon polarization beam splitter (PBS) based on grating-assisted contradirectional couplers (GACCs). Over 30-dB extinction ratios and less than 1-dB insertion losses are achieved for both polarizations. The proposed PBS exhibits tolerance in width variation, and the polarization extinction ratios remain higher than 20 dB for both polarizations when the width variation is adjusted from + 10 to -10 nm. Benefiting from the enhanced coupling by the GACCs, the polarization extinction ratio can be kept higher than 15 dB and the insertion loss is lower than 2 dB for both polarizations when the coupling length varies from 30.96 to 13.76 μm.
Ultrashort and Ultrabroadband Silicon Polarization Beam Splitter Based on a Bent Directional Coupler

Daoxin Dai,John E. Bowers

DOI: https://doi.org/10.1117/12.904602

2011-01-01

Abstract:A novel ultra-short polarization beam splitter (PBS) based on a bent directional coupler is proposed. The bent directional coupler has two bent optical waveguides with different core widths, which is designed to have phase-matching for TM polarization while there is a significant phase-mismatch for TE polarization. Therefore, the TM polarized light can be coupled from the narrow input waveguide to the adjacent wide waveguide while the TE polarization goes through the coupling region without significant coupling. An ultra-short (<10μm-long) PBS is designed based on silicon-on-insulator nanowires and the length of the bent coupling region is as small as 4.5μm when choosing the gap width as 200nm (large enough to simplify the fabrication). The numerical simulations show that the present PBS has a good fabrication tolerance for the variation of the waveguide width (more than ±60nm) and a very broad band (~200nm) for an extinction ratio of >10dB.
High Extinction-Ratio Compact Polarisation Beam Splitter on Silicon

Sitao Chen,Hao Wu,Daoxin Dai

DOI: https://doi.org/10.1049/el.2016.0683

2016-01-01

Electronics Letters

Abstract:A novel polarisation beam splitter (PBS) with a high extinction ratio in a broad band has been proposed and realised by cascading a bent directional coupler and a low-loss transverse-magnetic (TM)-pass polariser based on a subwavelength grating. The realised PBS has a footprint as small as 3 x 22.5 mu m, a high extinction ratio (> 20 dB) and a low excess loss (similar to 1 dB) are obtained over a broad band of similar to 60 nm for both transverse-electric and TM polarisations.
Realization of an Ultra-Short Silicon Polarization Beam Splitter with an Asymmetrical Bent Directional Coupler.

Jian Wang,Di Liang,Yongbo Tang,Daoxin Dai,John E. Bowers

DOI: https://doi.org/10.1364/ol.38.000004

IF: 3.6

2012-01-01

Optics Letters

Abstract:An ultra-short (similar to 10 mu m long) polarization beam splitter (PBS) based on an asymmetrical bent directional coupler (DC) is demonstrated experimentally by using silicon-on-insulator nanowires. The bent DC is designed to cross-couple TM polarized light completely while there is almost no coupling for TE polarization. Grating couplers are introduced at both ends of the PBS for efficient coupling to single-mode fibers. The measurement results show that the extinction ratios of the fabricated ultra-short PBS are higher than 10 dB for both polarizations in a broad wavelength range. It is also shown that the present PBS has a large fabrication tolerance. (C) 2012 Optical Society of America
A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Ting Hu,Haodong Qiu,Zecen Zhang,Xin Guo,Chongyang Liu,Mohamed S. Rouifed,Callum G. Littlejohns,Graham T. Reed,Hong Wang

DOI: https://doi.org/10.1109/jphot.2016.2585113

IF: 2.4

2016-01-01

IEEE Photonics Journal

Abstract:A compact and ultrabroadband polarization beam splitter (PBS) utilizing a hybrid plasmonic Y-branch (HPYB) on a silicon-on-insulator (SOI) platform is proposed and numerically demonstrated. The HPYB consists of a vertical hybrid plasmonic waveguide (HPW) and a horizontal HPW formed by silicon (Si) and silver (Ag) strip waveguides sandwiched with a silicon dioxide (SiO2) layer, in which the vertical and horizontal hybrid plasmonic modes (HPMs) are excited by the input transverse electric (TE) and transverse magnetic (TM) modes, respectively. The HPMs are split into different ports and coupled back to TE and TM modes to implement the polarization splitting function. A simplified and compact HPYB is robust for the HPMs' generation. The structure is wavelength insensitive since the HPMs' excitation is weakly correlated to the optical wavelengths. The simulation results show that the HPYB-based PBS has a compact footprint of $5 \times 1.8\ \mu\text{m}^2$ and an ultralarge working bandwidth of 285 nm, with the polarization crosstalk <; -10 dB and the worst-case TE (TM) mode insertion loss of -1.53 (-2.35) dB. The device also exhibits a large fabrication tolerance of 210-nm variation (from -100 to 110 nm) to the waveguide width for both polarizations.
Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Huiye Qiu,Yuxia Su,Ping Yu,Ting Hu,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ol.40.001885

2015-01-01

Abstract:Compact polarization beam splitter (PBS) based on grating-assisted couplers is proposed by utilizing contra-directional coupling between two corrugated strip waveguides. The co-directional coupling in the device is greatly suppressed by the designed asymmetric structure. The phase matching condition is only satisfied for TE polarization at the central wavelength of 1550 nm by a spatially periodic refractive-index perturbation. Due to the contra-directional coupling, the device breaks the limit of the precise control of the coupling strength and length. The simulation results show that the presented PBS, with a coupling length of only 19 μm, has a broad working bandwidth (∼40 nm) for a crosstalk below -12 dB. A large fabrication tolerance (±40 nm) for the waveguide width is also achieved.
Novel ultra-short and ultra-broadband polarization beam splitter based on a bent directional coupler

Daoxin Dai,John E Bowers

DOI: https://doi.org/10.1364/OE.19.018614

2011-09-12

Abstract:A novel ultra-short polarization beam splitter (PBS) based on a bent directional coupler is proposed by utilizing the evanescent coupling between two bent optical waveguides with different core widths. For the bent directional coupler, there is a significant phase-mismatch for TE polarization while the phase-matching condition is satisfied for TM polarization. Therefore, the TM polarized light can be coupled from the narrow input waveguide to the adjacent wide waveguide while the TE polarization goes through the coupling region without significant coupling. An ultra-short (<10 μm-long) PBS is designed based on silicon-on-insulator nanowires and the length of the bent coupling region is as small as 4.5 μm while the gap width is chosen as 200 nm (large enough to simplify the fabrication). Numerical simulations show that the present PBS has a good fabrication tolerance for the variation of the waveguide width (more than ± 60 nm) and a very broad band (~200 nm) for an extinction ratio of >10 dB.
Ultra-Compact Mode (De)Multiplexer and Polarization Beam Splitter Based on Tapered Bent Asymmetric Directional Couplers

JunBo Zhu,HaiYang Huang,YingXuan Zhao,Yang Li,XiaoJuan She,Han Liao,Rui Huang,ZiJian Zhu,Xiang Liu,Zhen Sheng,FuWan Gan

DOI: https://doi.org/10.1109/jphot.2021.3135908

IF: 2.4

2022-02-01

IEEE Photonics Journal

Abstract:Wepropose and experimentally demonstrate the ultra-compact mode (de)multiplexers and polarization beam splitter (PBS) based on tapered bent asymmetric directional couplers. The strong coupling strength introduced by tapered bent waveguides significantly shortens the coupling length. As a result, high coupling and conversion efficiencies over a broad bandwidth can be obtained with small footprint. The coupling length of the fabricated PBS and mode (de)multiplexers are less than 4.9 m and 8.7 m, respectively. From 1534-1600 nm, the measured insertion loss (IL) is less than 1.4 and 1.55 dB for the TE1-TE0 and TE2-TE0 mode (de)multiplexers, respectively, and the crosstalk (CT) is less than 10 dB. The fabricated PBS shows low insertion loss of 0.55 dB and decent crosstalk of < 14 dB for both polarizations over an 85 nm wavelength range from 1505-1590 nm. Meanwhile, the larger fabrication tolerance ensures that the proposed devices can be readily fabricated with the standard complementary metal-oxide-semiconductor (CMOS) process.

engineering, electrical & electronic,optics,physics, applied
Ultracompact and Broadband Polarization Beam Splitter Based on Polarization-Dependent Critical Guiding Condition

Zhoufeng Ying,Guanghui Wang,Xuping Zhang,Ho-pui Ho,Ying Huang

DOI: https://doi.org/10.1364/ol.40.002134

2015-01-01

Abstract:An ultracompact and broadband polarization beam splitter (PBS) based on the polarization-dependent critical guiding condition of an asymmetrical directional coupler is proposed. The device consists of a pair of silicon waveguides with different height and width. Due to the different cutoff conditions for the TE and TM polarization modes, it is possible to have the TM mode guided in one waveguide while the TE mode is supported in both. Therefore, only the phase-matching condition for the cross-coupling of the TE mode needs to be considered. This approach not only simplifies the design procedures but also significantly improves device performance with smaller total length and larger bandwidth. Finally, regardless of the contribution of S-bend waveguides, our proposed PBS has a coupling region as short as 0.2 mu m, which is the shortest reported until now. The simulation result shows that the extinction ratios for the TE and TM polarization are 13.5 and 16.6 dB at their respective output ports, and their insertion losses are 0.29 and 0.13 dB, respectively. Numerical simulations also show that the device offers a very large bandwidth (similar to 140 nm) with large extinction ratio (> 10 dB) and low insertion loss (< 1 dB). (C) 2015 Optical Society of America

Ultra-Broadband Compact Polarization Beam Splitter Based on Asymmetric Etched Directional Coupler

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Ultra-Broadband And Ultra-Compact Polarization Beam Splitter Based On A Tapered Subwavelength-Grating Waveguide And Slot Waveguide

Ultra-short Silicon Polarization Beam Splitter Based on an Asymmetrical Bent Directional Coupler

Ultrashort Broadband Polarization Beam Splitter Based on an Asymmetrical Directional Coupler.

Ultra-compact broadband polarization beam splitter with strong expansibility

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Ultra-broadband and Low-loss Polarization Beam Splitter on Silicon

Research on a Broadband Compact Polarization Beam Splitter

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Ultrashort and Ultrabroadband Silicon Polarization Beam Splitter Based on a Bent Directional Coupler

High Extinction-Ratio Compact Polarisation Beam Splitter on Silicon

Realization of an Ultra-Short Silicon Polarization Beam Splitter with an Asymmetrical Bent Directional Coupler.

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Novel ultra-short and ultra-broadband polarization beam splitter based on a bent directional coupler

Ultra-Compact Mode (De)Multiplexer and Polarization Beam Splitter Based on Tapered Bent Asymmetric Directional Couplers

Ultracompact and Broadband Polarization Beam Splitter Based on Polarization-Dependent Critical Guiding Condition