Abstract:Objective: The current state of the art human body models (HBMs) underpredict the number of fractured ribs. Also, it has not been shown that the models can predict the fracture locations. Efforts have been made to create subject specific rib models for fracture prediction, with mixed results. The aim of this study is to evaluate if subject-specific finite element (FE) rib models, based on state-of-the-art clinical CT data combined with subject-specific material data, can predict rib stiffness and fracture location in anterior-posterior rib bending.Method: High resolution clinical CT data was used to generate detailed subject-specific geometry for twelve FE models of the sixth rib. The cortical bone periosteal and endosteal surfaces were estimated based on a previously calibrated cortical bone mapping algorithm. The cortical and the trabecular bone were modeled using a hexa-block algorithm. The isotropic material model for the cortical bone in each rib model was assigned subject-specific material data based on tension coupon tests. Two different modeling strategies were used for the trabecular bone.The capability of the FE model to predict fracture location was carried out by modeling physical dynamic anterior-posterior rib bending tests. The rib model predictions were directly compared to the results from the tests. The predicted force-displacement time history, strain measurements at four locations, and rotation of the rib ends were compared to the results from the physical tests by means of CORA analysis. Rib fracture location in the FE model was estimated as the position for the element with the highest first principle strain at the time corresponding to rib fracture in the physical test.Results: Seven out of the twelve rib models predicted the fracture locations (at least for one of the trabecular modeling strategies) and had a force-displacement CORA score above 0.65. The other five rib models, had either a poor force-displacement CORA response or a poor fracture location prediction. It was observed that the stress-strain response for the coupon test for these five ribs showed significantly lower Young's modulus, yield stress, and elongation at fracture compared to the other seven ribs.Conclusion: This study indicates that rib fracture location can be predicted for subject specific rib models based on high resolution CT, when loaded in anterior-posterior bending, as long as the rib's cortical cortex is of sufficient thickness and has limited porosity. This study provides guidelines for further enhancements of rib modeling for fracture location prediction with HBMs.

Prediction of mechanical properties of human rib cortical bone using fractal dimension

Tensile material properties of human rib cortical bone under quasi-static and dynamic failure loading and influence of the bone microstucture on failure characteristics

Constitutive relationships for osteonal microcracking in human cortical bone using statistical mechanics

Fracture Mechanical Properties and Fractal Analysis of Fracture Surfaces of Cortical Bone

Predicting the Fracture Toughness of Human Cancellous Bone in Fractured Neck of Femur Patients Using Bone Volume and Micro-Architecture

A proposal for the combined analysis of bone quantity and quality of human cortical bone by quasi-brittle fracture mechanics

Detailed subject-specific FE rib modeling for fracture prediction

Novel approaches to correlate computerized tomography imaging of bone fracture callus to callus structural mechanics

Validation of a voxel-based FE method for prediction of the uniaxial apparent modulus of human trabecular bone using macroscopic mechanical tests and nanoindentation

Measurement and Characterization of the Cortical Bone Thickness in Chinese Human Ribs

Compressive axial mechanical properties of rat bone as functions of bone volume fraction, apparent density and micro-ct based mineral density

Acoustic emission applied to stochastic modeling of microdamage in compact bone

Characterization of damage mechanisms in cortical bone: Quantification of fracture resistance, critical strains, and crack tortuosity

Differences in the mechanical behavior of cortical bone between compression and tension when subjected to progressive loading

Determination of Canine Long Bone Ultimate Tensile Strain by Digital Image Correlation

Numerical modelling of cancellous bone damage using an orthotropic failure criterion and tissue elastic properties as a function of the mineral content and microporosity

Mechanical response and in-situ deformation mechanism of cortical bone materials under combined compression and torsion loads

Relations of mechanical properties to density and CT numbers in human bone

Application of Microfracture Analysis to Fatigue Fractures in Materials through Non-Destructive Tests

Multiscale approach including microfibril scale to assess elastic constants of cortical bone based on neural network computation and homogenization method

Estimation of the in-plane ultimate stress of lamellar tissue as a function of bone mineral density and osteocyte lacunae porosity