Abstract:The utilization of laser shock peening (LSP) in laser powder bed fused (LPBF) stainless steel (SS) 316L components enhances the mechanical characteristics and operational lifespan of the product quality through a significant reduction of residual stress and a noticeable increase in roughness parameters. The key objective of the study is to analyze the influence of consecutive laser shock peening (LSP) without ablative coating and low pulse energy on the surface properties, residual stress distribution, and microhardness of samples produced by LPBF with SS316L material. The surface quality of the sample subjected to consecutive laser shock peening shows a slight deterioration in its condition. This can be attributed to the combined impact of ablative surface and surface damage resulting from the production of high-energy plasma. However, the implementation of successive LSP results in a distinctive enhancement of compressive residual stresses (CRS) that are evenly distributed throughout the central axis and sharp edges. In contrast, the as-built condition exhibits non-uniform stress magnitudes. CRS observed in each LSP iteration exhibits a notable increase, reaching a maximum magnitude of -389 MPa compared to the initial stress level of 165 MPa in the as-built sample. This enhancement can be attributed to the repetitive impact of shock waves on the surface, leading to the formation of plastic deformation. The refinement of surface grains and the presence of favorable residual stresses were proven by the utilization of X-ray diffraction (XRD) studies and the Cos α plot. The XRD investigation also indicated the absence of any newly formed phases or secondary phases. A significant enhancement in microhardness was observed, with an increase of 58.3% achieved after the third consecutive peening process. The successive LSP samples displayed a gradual improvement in electrochemical behavior. Though the amplitude parameters increased after LSP, the increase in wear rate was observed.

Residual Stress Distribution, Phase Transformation, and Wettability Characteristics of Laser Peened Austenitic Stainless Steel

Influence of Laser Peening Parameters on Residual Stress Field of 304 Stainless Steel

The impact of successive laser shock peening on surface integrity and residual stress distribution of laser powder-bed fused stainless steel 316L

Influence of laser parameters on residual stress field of AISI 304 stainless steel induced by laser peening: A finite element analysis

Residual Stress Distribution and Microstructure at a Laser Spot of AISI 304 Stainless Steel Subjected to Different Laser Shock Peening Impacts

Effect of Laser Shock Peening on Electrochemistry and Wettability of Additively Manufactured Stainless Steel

Residual Stress Distribution and Microstructure of a Multiple Laser-Peened Near-Alpha Titanium Alloy

Influence of laser shock peening on Residual stress and microhardness of AA2219 friction stir weld

The effects of laser peening on laser additive manufactured 316L steel

Effect of multiple laser peening on the wear resistance of 304 stainless steel

Prevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser Peening

Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure

Influence of laser peening processing on SCC sensitivity in weld joint of 304 type stainless steel

Residual Stress Field Induced by Laser Peening: a Finite Element Analysis

Surface integrity of consecutive shot-peened additively manufactured 316L stainless steel

Mechanisms of laser non-uniform shock peening on the mechanical properties of SUS 304 stainless steel weld joints

Laser peening induced mitigation of severe pitting corrosion in titanium stabilized 321 steel

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments

Progress on microstructure and residual stress evolution and corrosion behavior in SP-, LSP- and WJP-treated austenitic stainless steels

Unveiling the origins of work-hardening enhancement and mechanical instability in laser shock peened titanium