Abstract:Electroless nickel composite coatings have the potential for high-temperature tribological applications, and a combination of high wear resistance and low friction factor is one of the desirable solutions but still a tricky problem. The addition of self-lubricating WS2 and hard Si3N4 nanoparticles to the Ni-P coatings is expected to obtain good high-temperature tribological performance. In this work, Ni-P-Si3N4-WS2 composite coatings with various contents of WS2 nanoparticles were prepared using electroless plating and subsequently annealed at 400 °C in an inert atmosphere. The tribological properties of the coatings were evaluated using a ball-on-disc wear instrument at operating temperatures from 25 to 600 °C. The microstructure, chemical composition, and surface morphology of the coatings were characterized by X-ray diffractometry (XRD), energy disperse spectroscopy (EDS), and scanning electron microscopy (SEM). Upon increasing the WS2 dosage in the bath, the WS2 content in the coating increased and the micro-hardness of the as-plated coating increased from 539 to 717 HV. After heat treatment, the coating underwent a crystallization process, and the hardness increased from 878 to 1094 HV. The main wear mechanism of the coating changed from adhesive wear in the as-plated state to abrasive wear in the annealed state. The annealed Ni-P-Si3N4-WS2 coating with a WS2 dosage of 2.5 g/L in the bath exhibited excellent mechanical properties, with a hardness of 10.9 GPa, a friction coefficient of ~0.51, and a wear rate of 8.4 × 10−15 m3N−1×m−1 at room temperature, and maintained optimal performance at high temperatures. At operating temperatures of 200, 400, and 600 °C, the form of wear was adhesive wear for coatings with a WS2 dosage < 1.5 g/L and abrasive wear for coatings with a WS2 dosage ≥ 1.5 g/L. The synergism of WS2 and Si3N4 particles refined the grains of the Ni-P matrix in as-plated coatings and obviously reduced the friction coefficient of friction pairs in annealed coatings at all operating temperatures.

In Situ Formation of Extremely High Corrosion Resistant Ni–Ni3Si Nanocomposite Coating Using Spark Plasma Sintering and Subsequent Heat Treatment

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Effect of SiC Nanoparticles on the Structure and Properties of Ni+W-SiC Nanocoatings

Novel Nano-Core–Shell Structure SiO2@Ni-Reinforced Ni-P-Based Amorphous Composite Coating

Microstructure evolution, mechanical and abrasive wear properties of NiCrSiB-SiC composite coatings prepared on 16Mn low-carbon steel by Ni-based alloy catalyzed SiC decomposition

A Study on the Electrocodeposition Processes and Properties of Ni–SiC Nanocomposite Coatings

CORROSION BEHAVIOR OF THE Ni-SiC NANOCOMPOSITE COATINGS

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

High Temperature Tribological Behavior of Electroless Plating Ni-P-Si3N4-WS2 Composite Coatings

Study on superhydrophobicity and excellent corrosion resistance of a novel Ni‐SiC nanocomposite coating

High-temperature Oxidation of Electrodeposited Ni-Co-SiC Composite Coatings

Enhancement of Corrosion and Wear Resistance of Ni-P Coatings Stems from the Synergistic Effects of Cr3C2 and Heat Treatment

Electrodeposited FeCoNiWMo high entropy alloy/SiC nanocomposite coatings: Microstructure, mechanical properties and corrosion resistance

Investigation on the Microstructure Evolution and Properties of a Novel In-Situ Fiber Phase-Reinforced Nickel Composite Coating Deposited by Wide-Band Laser

Characterization of Tribological and Mechanical Properties of the Si3N4 Coating Fabricated by Duplex Surface Treatment of Pack Siliconizing and Plasma Nitriding on AISI D2 Tool Steel

Properties of Ti-Si-N Nanocomposite Coatings Deposited by Closed-Field Unbalanced Magnetron Sputtering

Corrosion Behavior of Nanostructured Ni‐Si3N4 Composite Films: A Study of Electrochemical Impedance Spectroscopy

Investigation on Microstructure and Properties of the Electrodeposited Ni-SiC Composite Coating

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Electrochemical Properties and XPS Analysis of Ni-B/SiC Nanocomposite Coatings