Abstract:The oil industry is facing substantial environmental challenges, especially in managing waste streams such as Oilfield Produced Water (OPW), which represents a significant component of the industrial ecological footprint. Conventional treatment methods often fail to effectively remove dissolved oils and grease compounds, leading to operational difficulties and incomplete remediation. Electrochemical oxidation (EO) has emerged as a promising alternative due to its operational simplicity and ability to degrade pollutants directly and indirectly, which has already been applied in treating several effluents containing organic compounds. The application of EO treatment for OPW is still in an initial stage, due to the intricate nature of this matrix and scattered information about it. This study provides a technological overview of EO technology for OPW treatment, from laboratory scale to the development of large-scale prototypes, identifying design and process parameters that can potentially permit high efficiency, applicability, and commercial deployment. Research in this domain has demonstrated notable rates of removal of recalcitrant pollutants (>90%), utilizing active and non-active electrodes. Electro-generated active species, primarily from chloride, play a pivotal role in the oxidation of organic compounds. However, the highly saline conditions in OPW hinder the complete mineralization of these organics, which can be improved by using non-active anodes and lower salinity levels. The performance of electrodes greatly influences the efficiency and effectiveness of OPW treatment. Various factors must be considered when selecting the electrode material, such as its conductivity, stability, surface area, corrosion resistance, and cost. Additionally, the specific contaminants present in the OPW, and their electrochemical reactivity must be considered to ensure optimal treatment outcomes. Balancing these considerations can be challenging, but it is crucial for achieving successful OPW treatment. Active electrode materials exhibit a high affinity for chloride molecules, generating more active species than non-active materials, which exhibit more significant degradation potential due to the production of hydroxyl radicals. Regarding scale-up, key challenges include low current efficiency, the formation of by-products, electrode deactivation, and limitations in mass transfer. To address these issues, enhanced mass transfer rates and appropriate residence times can be achieved using flow-through mesh anodes and moderate current densities, which have proven to be the optimal configuration for this process.

Crude oil wastewater treatment by electrocoagulation in a continuous process with polarity switch

Low-Voltage Electrical Demulsification of Oily Wastewater

Treatment of Refectory Oily Wastewater by Electro-Coagulation Process.

Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Treatment of Oil-Containing Wastewater from Oil Field by Electrocoagulation

Demulsification with simultaneous water purification by coupling filtration and enhanced oil droplet coalescence at anode interface in an electrochemical reactor

Investigation of oil content removal performance in real oily wastewater treatment by electrocoagulation technology: RSM design approach

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

Electrolysis-enhanced coagulation process for highly emulsified oily wastewater treatment: Floc diameter, oil removal performance and mechanism

Assessment of electrocoagulation for the treatment of petroleum refinery wastewater

Efficient removal of COD, BOD, oil & grease, and turbidity from oil-field produced water via electrocoagulation treatment

Effect of current density on COD removal efficiency for wastewater using the electrocoagulation process

Principles, challenges and prospects for electro-oxidation treatment of oilfield produced water

Purification and detoxification of petroleum refinery wastewater by electrocoagulation process

Treatment of oily wastewater by electrocoagulation technology: A general review (2018-2022)

Treatment of oily wastewater with iron-carbon internal electrolysis process enhanced by ultrasonic

Continuous Separation Process of Water-in-Crude Oil Emulsion by Simultaneous Application of an Electrical Field Combined with a Novel Absorbent Based on Functionalised PolyHIPE Polymer

Demulsification performance and mechanism of oil droplets by electrocoagulation: Role of surfactant

Comparative study of electrochemical wastewater treatment processes for bilge water as oily wastewater: A kinetic approach

Oily Wastewater Desalted by Electrodialysis for Rhamnolipids Production with Pseudomonas Aeruginosa