Abstract:Thermal management has become one of the critical problems in high-power laser systems. The laser crystal, which dissipates a heat flux over 150 W/cm2, is the most challenging component when solving the thermal problem. In this work, a specialized central-jetting microchannel heat sink (MCHS) is proposed purposely for a small-size laser crystal with high heat fluxes. Considering the space constraint and installation restriction, the MCHS has a narrow width to fit with the laser crystal, while its length is extended to enhance the heat dissipation capability. The MCHS is integrated by welding the two layers completely through a vacuum brazing method. Central-jetting impingement is introduced to enhance the cooling efficiency. Coolant is flushed vertically into the microchannel layer toward the central heating region where the heating source is attached at the central bottom of the MCHS. We conduct a parametric study on the thermal performance of the MCHS by experiments. The overall heat transfer coefficient of the MCHS achieves 50 × 103 W/(m2•K), and the average heat transfer coefficient of the microchannel reaches 21.5 × 103 W/(m2•K). The surface temperature of the heating head is controlled below 65 °C, and the temperature variation is less than 5 °C. In the solid bottom of the MCHS, thermal resistance in vertical direction is over 1.8 times of that in the horizontal direction, ensuring an efficient heat dissipation in the extended volume. The local heat transfer characteristics are further examined through additional numerical simulations. The wall temperature of the microchannel and the local heat transfer coefficient have a high plateau in the heating region, and then drop significantly along the flow direction. Due to heat transfer enhancement by jet impingement, the heat transfer coefficient in the central region is generally 15% higher than that averaged on the full microchannel.

Thermal management of high-power LED module with single-phase liquid jet array

Cooling of high-power LEDs by liquid sprays: Challenges and prospects

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Thermal Analysis and Design of High-Power LED Street Light

Study on the Water Cooling Technology for the High Power LED Array

Thermal Design Based on Thermosyphon Heat Sink of High-Power LED Street Light

High-performance thermal management system for high-power LEDs based on double-nozzle spray cooling

Latest Advancement of Thermal Management for High Power LED

A Liquid Metal Cooling System for the Thermal Management of High Power LEDs

Thermal Design of GaN-based High-power LED Module

Cooling of High Power LEDs Through Ventilating Ambient Air to Front Surface of Chip

Thermal management of high-power LED based on thermoelectric cooler and nanofluid-cooled microchannel heat sink

System Packaging of Thousands Watt High Power LEDs with Heat Pipe-Fin Air Cooling System: Design and Manufacturing

Experimental Study on Liquid Metal Cooling for LED Light

Copper wick based loop heat pipe for thermal management of a high-power LED module

Heat Dissipation Enhancement of High-Power LEDs Through Compact Ceramic Substrate Integrated With Microchannel

Fluid Flow and Heat Transfer Characteristics of Liquid Cooling Microchannels in LTCC Multilayered Packaging Substrate

Thermal performance of a central-jetting microchannel heat sink designed for a high-power laser crystal

Study on LED Array Heat Radiator Improvement under Natural Convection

Advanced loop heat pipe application for cooling high power LED lights

Efficient Thermal Management of High-Power Electronics Via Jet-Enhanced HU-type Manifold Microchannel