Exhaust system piping made by hydroforming: relations between stresses, microstructure, mechanical properties and surface

Barbara Kucharska,Oskar Moraczyński

DOI: https://doi.org/10.1007/s43452-020-00142-x

IF: 4.042

2020-11-06

Archives of Civil and Mechanical Engineering

Abstract:Abstract The subject of research is car exhaust system piping made of chromium–nickel steel of grade AISI304L with a unique, complex shape that was obtained by hydroforming technology. The purpose of the research was to determine the relation between the microstructure features, surface condition, hardness and the stresses on the external surface as determined by the sin 2 ψ X-ray method. We found that the stresses were tensile and correlated with the steel hardness, i.e. they were greater where the hardness was higher. Moreover, longitudinal stresses showed a relationship with pipe wall thickness, while circumferential stresses did so only partially. According to our data, the greatest value of stress determined in the pipe amounted to 290 MPa, and was close to the yield point of the strain hardened 304L steel. As depicted via XRD and SEM examination, the pipe stress level and hardness were influenced by the transition γ→α’. Furthermore, in the region of higher stress and hardness, the amount of martensite was 10 vol.%. We also noted that the pipe’s outer surface when subjected to friction against the die shows lesser roughness compared to its inner surface upon exposure to water under pressure.

engineering, mechanical,materials science, multidisciplinary, civil