ANALYSIS OF KINETIC PARAMETERS OF ENZYMATIC CATALYSIS ESTERIFICATION REACTIONS IN HEXANE MEDIUM

V. Gamayurova,E. Vorobiev

DOI: https://doi.org/10.37747/2312-640x-2020-18-274-275

2020-01-01

Abstract:The kinetic parameters of the of aliphatic esters biocatalysis synthesis process are calculated and analyzed using modeling method. It allows to calculate the reaction rates by selecting their flow different patterns.

What problem does this paper attempt to address?

Kinetics and Modeling of Melt Polycondensation for Synthesis of Poly[(butylene Succinate)‐co‐(butylene Terephthalate)], 1 – Esterification

Lixia Hu,Linbo Wu,Fangchao Song,Bo-Geng Li

DOI: https://doi.org/10.1002/mren.201000021

IF: 1.871

2010-01-01

Macromolecular Reaction Engineering

Abstract:The kinetics of the tetrabutyl titanate-catalyzed homogeneous succinic acid/1,4-butylenediol (BDO) and heterogeneous terephthalic acid/BDO esterifications were investigated experimentally and theoretically. A unified kinetic model considering two main esterifications as well as one reversible polycondensation and two THF-forming side reactions has been developed for the two esterification systems. The model agrees well with the experimental results. The effects of reaction temperature, diol/diacid ratio, catalyst amount, and heterogeneity on the esterification kinetics are simulated and discussed.
Reaction-kinetic Model-Guided Biocatalyst Engineering for Dual-Enzyme Catalyzed Bioreaction System

Feng Cheng,Sheng-Yi Zhou,Lu-Xin Chen,Wei Zhang,Shu-Fang Li,Chun-Yue Weng,Ya-Jun Wang,Yu-Guo Zheng

DOI: https://doi.org/10.1016/j.cej.2022.138997

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:•A strategy of reaction-kinetic model-guided biocatalyst engineering was developed.•The kinetic model of a dual-enzyme-catalyzed bioreaction was constructed.•The limiting factor was analyzed under the guide of reaction kinetic model.•A high space–time yield (1152 g/L d-1) was achieved for atorvastatin precursor.
Kinetics of KOH Catalyzed Trans-Esterification of Cottonseed Oil for Biodiesel Production

Tiefeng Wang

2005-01-01

Abstract:Methyl esters were produced by trans-esterification of c ottonseed oil with methanol in the presence of a homogeneous catalyst (KOH).A ki netic model was established by taking three consecutive and reversible reactions into consideration.Rate constants were determined for each reaction by the Rung e-Kutta method with optimization.The corresponding values of frequency factor a nd activation energy were then obtained based on the Arrhenius’ law for a ll forward and reverse reactions under different experimental conditions.
Reaction Kinetics of the Catalytic Esterification of Citric Acid with Ethanol

Aspi K. Kolah,Navinchandra S. Asthana,Dung T. Vu,Carl T. Lira,Dennis J. Miller

DOI: https://doi.org/10.1021/ie060828f

2006-12-20

Abstract:Reaction kinetics are presented for the reversible esterification reaction of citric acid with ethanol to form tri-ethyl citrate via mono-ethyl and di-ethyl citrates. The reaction was studied in batch isothermal experiments, self-catalyzed homogeneously by citric acid and the formed mono- and di-ethyl citrates, and heterogeneously catalyzed by macroporous Amberlyst-15 ion-exchange resin catalyst. Experimental data were obtained between 78 and 120 °C at different mole ratios of ethanol to citric acid and catalyst concentrations up to 5 wt % ion-exchange resin. The kinetics of ethanol etherification to form di-ethyl ether were included in the investigation. Kinetic modeling was performed using a pseudo-homogeneous UNIQUAC-based activity model, taking into consideration the rate of self-catalyzed esterification and the side reaction to form diethyl ether. The activity coefficients for the tri-ethyl citrate−ethanol and tri-ethyl citrate−water binary pairs were obtained from experimental vapor−liquid equilibrium data. Kinetics of the di-ethyl citrate to tri-ethyl citrate reaction limit the overall tri-ethyl citrate formation rate, as citric acid and mono-ethyl citrate are esterified rapidly to their equilibrium compositions. Higher temperatures lead to faster reaction kinetics but significantly increase the production of the undesired byproduct di-ethyl ether. The kinetic model developed is useful for the design and simulation of processes such as reactive distillation for tri-ethyl citrate formation.

engineering, chemical
Kinetics of glycerol esterification reaction

Li CAI,Qinglong XIE,Zhenyu WU,Xiaohua LI,Meizhen LU,Yong NIE,Jianbing JI

DOI: https://doi.org/10.3969/j.issn.1003-7969.2017.09.022

2017-01-01

Abstract:Glycerol esterification is an effective method to reduce the acid value of acidic oil,which can be used for biodiesel production.A mixture of soybean oil and oleic acid was used as the model compound.The effect of reaction temperature on glycerol esterified product distribution was examined.Kinetic parameters,including reaction rate constant k and activation energy Ea,of all the reactions involved in glycerol esterification process were determined using the second-order reaction kinetics model.The effects of reaction temperature,molar ratio of glycerol to free fatty acid,and acid value of feedstock on acid value reduction were predicted based on the model.The results showed that the model values were in good agreement with the experimental values.The reduction of acid value was highly dependent on the reaction temperature.The higher acid value reduction rate and lower final acid value were observed at higher reaction temperature,higher molar ratio of glycerol to free fatty acid and higher initial acid value of feedstock.The research results were helpful to reveal the mechanism of glycerol esterification reaction and design of glycerol esterification reactor.
A methodology, excel solver tool based, to determine the kinetics parameters of enzymatic Ping-Pong reactions: application to an esterification reaction

María Gómez,Maria Dolores Murcia,Elisa Gomez,Jose Luis Gómez,Asuncion Hidalgo,María Claudia Montiel-Morte,Juan Manuel Hernández

DOI: https://doi.org/10.1039/d2re00428c

2022-11-22

Abstract:In this work, a new methodology to calculate the kinetic parameters of enzymatic reactions has been developed. The methodology has been applied to an esterification in solvent free conditions, which kinetic follows a bisubstrate Ping-Pong mechanism: the synthesis of laurate of 2-hexyl-1-decanol, a biolubricant additive, in a batch reactor, in the presence of immobilized Novozym® 435 lipase. As an alternative to the traditional differential methods, based on the use of initial reaction rate data, this methodology is based on the integral analysis, to solve the reactor model once it has been developed, so that an explicit expression for the reaction time as a function of the substrate conversion can be obtained. Adding this function to the Excel Solver tool, and by minimizing the sum of the square differences between the experimental and calculated values of the reaction time, the kinetic parameters have been determined. After, using these parameters and the model equation, theoretical values of conversion have been calculated by means of the bisection method implemented in VBA languaje and compared with the experimental ones. High values of determination coefficients were obtained, which validated both the procedure of parameters determination and the reactor model. In addition, optimal reaction conditions were determined and it was confirmed that the catalyst can be reused several times without significant variation in its activity.

chemistry, multidisciplinary,engineering, chemical
On Solving the Problem of Finding Kinetic Parameters of Catalytic Isomerization of the Pentane-Hexane Fraction Using a Parallel Global Search Algorithm

Konstantin Barkalov,Irek Gubaydullin,Evgeny Kozinov,Ilya Lebedev,Roza Faskhutdinova,Azamat Faskhutdinov,Leniza Enikeeva

DOI: https://doi.org/10.3390/math10193665

IF: 2.4

2022-10-07

Mathematics

Abstract:This article is devoted to the problem of developing a kinetic model of a complex chemical reaction using a parallel optimization method. The design of the kinetic model consists of finding the kinetic parameters of the reaction, which cannot be calculated analytically, and since the chemical reaction involves many stages, the optimization problem is multiextremal. As a chemical reaction, the process of catalytic isomerization of the pentane-hexane fraction is considered, which is now important due to the switch of the oil refining industry to the production of gasoline corresponding to the Euro-5 standard. On the basis of known industrial data on the concentrations of reaction components and the temperature at the outlet of the third reactor, the activation energies and pre-exponential factors of each reaction stage were calculated. To solve the optimization problem, the authors developed a parallel global search algorithm and a program based on Lipschitz optimization. The kinetic parameters found made it possible to develop a mathematical model of the process, which is in good agreement with industrial data. The developed mathematical model in future works will make it possible to study the dynamics of the gas–liquid flow in the reactor unit, taking into account diffusion and heat exchange processes through the catalyst layer.

mathematics
Kinetic Study on Esterification of Acetic Acid with Isopropyl Alcohol Catalyzed by Ion Exchange Resin

Ying Liu,Jia Liu,Hanzhao Yan,Zheng Zhou,Aidong Zhou

DOI: https://doi.org/10.1021/acsomega.9b02994

IF: 4.1

2019-01-01

ACS Omega

Abstract:Esterification kinetics on acetic acid with isopropyl alcohol was studied in an intensified fixed bed reactor at 333-353 K with Amberlyst 36 Wet. The effects of volume flow rate, molar ratio of reactants, catalyst loading, and operating temperature were investigated and optimized. The method of UNIFAC was applied to calculate the activity coefficient of each component for correcting the nonideality of the solution. Reaction enthalpy, entropy, and Gibbs free energy were calculated in different cases. The pseudohomogeneous model, Eley- Rideal model, and Langmuir-Hinshelwood-Hougen-Watson model were used to establish kinetic equations of the reaction conducted in the IFBR. It was proved that the LHHW model can accurately describe the esterification kinetics in the intensified fixed bed reactor.
Thermodynamic and Kinetic Study on the Catalysis of Isoamyl Acetate by a Cation-Exchange Resin in an Intensified Fixed-Bed Reactor.

Lei Chen,Ying Liu,Zhi Cao,Gaodong Yang,Aidong Zhou,Zheng Zhou

DOI: https://doi.org/10.1021/acsomega.0c03116

IF: 4.1

2020-01-01

ACS Omega

Abstract:Kinetics and thermodynamics of esterification by a cation-exchange resin in an intensified fixed-bed reactor was studied systematically. The resin type, catalyst loading, volume flow rate, initial molar ratio, temperature, and catalyst reusability were studied and optimized. The nonideality of the reaction system was corrected by the UNIFAC group contribution method. The Δr H 0, Δr S 0, and Δr G 0 of the reaction were acquired by two methods. The pseudo-homogeneous (PH) model and the Langmuir-Hinshelwood-Hougen-Watson (LHHW) model were adopted to simulate the kinetic process. The result indicated that the LHHW model was better suited to simulate the kinetic process than the PH model.
Kinetic Study of Ultrasound-Intensified Biodiesel Production Using Anion Exchange Resin as a Heterogeneous Catalyst

Isabel J. Bejarano-Alva,Lilian C. K. Biasi,Eduardo A. Caldas Batista,Antonio J. A. Meirelles

DOI: https://doi.org/10.1021/acs.iecr.3c03504

2024-01-05

Industrial & Engineering Chemistry Research

Abstract:The mathematical models used to represent the kinetics of heterogeneous reactions are usually complex and require the adjustment of a significant number of variables. The present study aimed to apply a simpler kinetic model with fewer adjusted parameters for the heterogeneous reaction during ultrasound-assisted biodiesel production using anion exchange resin as a catalyst. Through bench tests and computational tools, which molecules would enter the resin pores during the reaction and their effects on the kinetic data were investigated. With this information, two possible approaches were proposed. The results show the second approach as physically more accurate, considering the samples taken from both inside and outside the resin. It also allows for better fitting of the kinetic model and obtaining correlation coefficients (R 2) greater than 99%. The findings of this study are expected to be useful for building more accurate and simpler models for biodiesel production processes with various catalysts and reagents.

engineering, chemical
Kinetic study of esterification by immobilized lipase in n-hexane

W Chulalaksananukul,J S Condoret,P Delorme,R M Willemot

DOI: https://doi.org/10.1016/0014-5793(90)80537-s

1990-12-10

Abstract:The kinetic of the esterification of oleic acid by ethanol catalyzed by immobilized lipase of Mucor miehei in n-hexane as a solvent has been completely studied. The kinetics of the reaction are suggested to agree with a Ping-Pong Bi Bi mechanism in which only inhibition by excess of ethanol has been identified. Values of all apparent kinetic parameters were computed. No evidence of any significant external diffusional limitation which could account for these values has been detected. Optimization of water content through distribution ratio of water between solvent and support was examined.
Reformulated Kinetics of Immobilized Enzymes in Non-Conventional Media: A Case of Lipase-Catalyzed Esterification

Emmanuel M. Papamichael,Panagiota-Yiolanda Stergiou

DOI: https://doi.org/10.3390/catal14110830

IF: 3.9

2024-11-27

Catalysts

Abstract:Several approaches have been reported that aim to achieve simplified standardizations of the kinetic behavior of immobilized enzymes under specific experimental conditions. We have previously published simplified rate equations based on the kinetics of immobilized enzymes. Recently, new experimental results have become available on the kinetics and mechanisms of esterifications catalyzed by immobilized lipase in unconventional media, and consequently, a reformulation of their kinetics is necessary. In this work, we report the development of simplified rate equations relating the aforementioned reaction conditions on a new basis, considering our kinetic and mechanistic results. We provide experimental evidence that two different mechanisms describe the esterifications catalyzed by immobilized lipase, either in anhydrous organic solvent (n-hexane) or under non-solvent conditions. A ping-pong bi–bi mechanism with double dead-end substrate inhibition by both the fatty acid and the alcohol has been found to apply in the former case, while in the latter case the esterification proceeds via an ordered bi–bi mechanism with single dead-end substrate inhibition by ethanol. This study may be biotechnologically useful, as the increased use of immobilized enzymes, whether in academic research or in industry, requires sustainable development of new and environmentally friendly synthetic processes.

chemistry, physical
Thermodynamic and Kinetic Study on the Catalysis of Isobornyl Acetate by a Cation Exchange Resin an Intensified Fixed-Bed Reactor

Wanglai Dong,Lei Chen,Hanzhao Yan,Zijie Zhang,Zheng Zhou

DOI: https://doi.org/10.37358/rc.21.1.8408

2021-01-01

Revista de Chimie

Abstract:Esterification Thermodynamic and Kinetic on acetic acid with camphene was studied systematically in an intensified fixed bed reactor at 303-323 K with anhydrous NKC-9 resin. The catalyst loading, initial molar ratio, temperature, and catalyst reusability were studied and optimized. The method of UNIFAC was applied to calculate the activity coefficient of each component for correcting the nonideality of the solution. Reaction enthalpy, entropy, and Gibbs free energy were calculated. The kinetics of camphene esterification was studied by pseudo-homogeneous model (PH model), and the fitting effect was good, which provided experimental reference and theoretical basis for the industrial production of isobornyl acetate.
Kinetics and thermodynamics of the esterification reaction according to the Langmuir-Hinshelwood mechanism

Rohollah Ezzati

2018-03-01

Abstract:In this work, kinetics and thermodynamics of esterification reaction were studied. This research investigated the esterification reaction between methanol and acidified oil catalyzed by sulfonated cation exchange resin and proposed a new rate equation for consideration of kinetics of this reaction according to the Langmuir-Hinshelwood mechanism. Thermodynamics and kinetics parameters were calculated according to this equation. The results of this study showed that this new equation was a reasonable equation for kinetics study of the esterification reaction. Also, kinetics parameters were calculated for this reaction. Activation energy and Arrhenius pre-exponential factor were equal to 75.2477 / and 8.9994 10 / . respectively.

Chemistry
A Study on Kinetics of Catalytic Esterification of Synthesis of Isoamyl Acetate over Cation-exchange Resin

YAO Tian-ping,LI Tao,JIN Dong-yuan

DOI: https://doi.org/10.3969/j.issn.1671-7333.2006.03.005

2006-01-01

Abstract:The kinetic behavior of the esterification of acetic acid with isoamyl alcohol over a strong acidic cation-exchange resin,K2641,is investigated.The experiments were conducted in a stirred batch reactor to synthesize a value added ester,isoamyl acetate.The concentration of acetate acid varying with reaction time has been determined.From analogizing the data which were obtained from the experiment,the kinetic equation with the Arrhenius model has been derived,namely,r=-dc_(乙酸)dt=0.3656 dm~3/mol·s e~(-30120 J/molRT)c_(乙酸) c_(异戊醇)-8.44.04 dm~3/mol·s e~(-49750 J/molRT).The apparent activation energy and pre-exponential factor of forward reaction are 30.12 kJ/mol and 0.365 dm~3/mol·s,respectively;and the apparent activation energy and pre-exponential factor of reverse reaction are 49.75 kJ/mol and 844.04 mol/dm~3·s,respectively.
Modeling of esterification process in industrial poly (ethylene terephthalate) plant based on kinetic mechanism

LI Wen-yan,GU Xue-ping,ZENG Si,WANG Jia-jun,FENG Lian-fang

DOI: https://doi.org/10.3969/j.issn.1005-9954.2010.10.035

2010-01-01

Abstract:The computation of thermodynamic properties and determination of kinetic parameters are very important for modeling and simulation of industrial continuous poly(ethylene terephthalate) (PET) plant. The elementary reactions involved in the esterification process include the reactions of esterification, polycondensation, hydrolysis, glycolysis and diethylene glycol formation. The reasonable ranges of the kinetic constants of these elementary reactions were investigated. The sensitivity of the mass flow of terephthalic acid, diethylene-glycol, ethylene-glycol, PET to the variations in those kinetic constants was analyzed, thus providing the basis for determining the appropriate model parameters of process modeling. The model of esterification process of PET process was developed based on kinetic mechanism and the re-parameterized UNIFAC model. The model was validated by using the plant data for different capacities. The error between plant data and simulation is less than 3%.
Theoretical and Kinetic Analysis of the Esterification of Undecylenic Acid with Glycerol

Jean-François Fabre,Gildas Nyame Mendendy Boussambe,Romain Valentin,Zéphirin Mouloungui

DOI: https://doi.org/10.1002/lipd.12239

Lipids

Abstract:The synthesis of undecylenic acid partial esters can be performed at mild temperature with a classical esterification reaction catalyzed by dodecylbenzene sulfonic acid (DBSA). A semi-empirical molecular modeling on the different reaction intermediates indicates that DBSA can strongly decrease their heats of formation through hydrogen bonding. Diester formation seems to be thermodynamically favored with a selectivity for alpha, alpha, or alpha, beta forms that depend on the geometry of the catalyst-intermediate configuration. Triesters are not favored but a high selectivity for monoesters requires a kinetic control. Experimental approach, considering different DBSA concentrations and temperature partially confirms the theoretical predictions but surfactant properties of DBSA and monoesters may induce nonpredicted geometries. Global apparent activation energies are calculated, corresponding to the formation and hydrolysis of mono and diesters. If water trapping allows the decrease of hydrolysis reaction constants, the presence of water and subsequent phase separation may explain differences between theoretical and experimental results and could help increasing monoester selectivity.
Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst

Adriana Freites Aguilera,Pasi Tolvanen,Johan Wärnå,Sebastien Leveneur,Tapio Salmi

DOI: https://doi.org/10.1016/j.cej.2019.121936

IF: 15.1

2019-11-01

Chemical Engineering Journal

Abstract:Epoxidized fatty acids and fatty acid esters are used as chemical intermediates and environmentally friendly bio-lubricants. The epoxidation is carried out by the Prileschajew reaction, which implies the use of hydrogen peroxide as oxidation agent and a percarboxylic acid as the oxygen carrier. The epoxidation process is slow in the two-phase system (aqueous phase and oil phase), but it can be considerably enhanced by incorporating a heterogeneous acid catalyst. The results for the epoxidation of a model compound, oleic acid were presented. A cation-exchange resin (Amberlite IR-120) was used as the heterogeneous catalyst and acetic acid was the reaction carrier. Experimental data on oleic acid epoxidation were obtained at 40–50 °C under conventional heating and microwave irradiation. The experimental set was focused on studying the catalytic effect of the solid resin. The kinetic results revealed that the presence of the heterogeneous catalyst completely masked the enhancing effect of microwave radiation. An extensive set of kinetic data obtained from a laboratory-scale loop reactor was modelled with a realistic heterogeneous model taking into account the co-existence of three phases in the chemically complex reaction system. Rate equations were presented for all the reaction steps involved: the perhydrolysis, epoxidation and ring-opening steps. The rate equations were included in the three-phase reactor model and the kinetic parameters of the system were determined by non-linear regression analysis.
Green synthesis of ester base oil with high viscosity — Part II: Reaction kinetics study

Shaojian Hu,Jianhua Zhu,Bencheng Wu,Rui Ma,Xiaohui Li

DOI: https://doi.org/10.1016/j.cherd.2020.10.015

IF: 4.119

2021-01-01

Chemical Engineering Research and Design

Abstract:Equal reactivity of functional groups applies to reaction kinetics of complex ester.Mutation of reaction order is easily caused by adsorption and high viscosity.Activation energy increases with the increase in steric hindrance of complex ester.Sn/Zr mixed oxides can reduce the activation energy of esterification reaction.As an eco-friendly lubricant base oil, ester base oil is receiving increasing attention. However, studies on synthetic reaction kinetics of high viscosity complex ester have been rarely reported. In this work, based on the principle of equal reactivity of all functional groups and simplified kinetics models, synthetic reaction kinetics for high viscosity complex ester was investigated in two steps. As for the esterification of trimethylolpropane with glutaric acid, the activation energies of the first and second stage were 55.3 and 73.5 kJ/mol, respectively. As for the esterification of the first step products with 2-ethylhexanoic acid, the activation energies of the first and second stage were 60.6 and 98.2 kJ/mol, respectively. As for the esterification of the first step products with n-heptanoic acid, its activation energy was 68.9 kJ/mol. A mutation phenomenon on reaction order from zero to second order was discovered, which could be explained by the strong adsorption of organic acid on catalyst surface. The conversion rate of carboxyl of synthetic reaction for mixed acid ester was estimated by simulation, and average relative error was less than 3.0%. The synthetic process of high viscosity complex ester was considered to consist of a series of parallel-consecutive reactions with addition-elimination mechanism.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S0263876220305219-fx1_lrg.jpg">Download : Download high-res image (109KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S0263876220305219-fx1.jpg">Download : Download full-size image</a></li></ol>

engineering, chemical
Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Ionut Banu,Emil Florin Tuta,Grigore Bozga

DOI: https://doi.org/10.37358/rc.17.10.5870

2017-11-15

Revista de Chimie

Abstract:The aim of this work is the investigation, by modelling and simulation, of the liquid phase hydrogenation of 2-ethyl-2-hexenal to 2-ethyl-hexanol, over a modern Cu-Ni catalyst, in an industrial tri-phase trickle bed reactor. The chemical kinetics, hydrodynamic parameters and mass transfer coefficients were evaluated from published data. The mathematical model of the process takes into consideration intraparticle and interphase concentration gradients. The calculated temperature evolution along the catalytic reactor is in a good agreement with measured values from an industrial plant. The results indicate that critical kinetic step of the process is the hydrogen transfer toward the inner catalyst surface and that the process occurs close to gas-liquid equilibrium. The degree of catalyst pellet utilization, evaluated by internal effectiveness factors, is relatively low, being mainly dependent on rapid exhaust of dissolved hydrogen inside the catalyst pellet. The presented results could be useful in process analysis, optimization and control studies.

ANALYSIS OF KINETIC PARAMETERS OF ENZYMATIC CATALYSIS ESTERIFICATION REACTIONS IN HEXANE MEDIUM

Kinetics and Modeling of Melt Polycondensation for Synthesis of Poly[(butylene Succinate)‐co‐(butylene Terephthalate)], 1 – Esterification

Reaction-kinetic Model-Guided Biocatalyst Engineering for Dual-Enzyme Catalyzed Bioreaction System

Kinetics of KOH Catalyzed Trans-Esterification of Cottonseed Oil for Biodiesel Production

Reaction Kinetics of the Catalytic Esterification of Citric Acid with Ethanol

Kinetics of glycerol esterification reaction

A methodology, excel solver tool based, to determine the kinetics parameters of enzymatic Ping-Pong reactions: application to an esterification reaction

On Solving the Problem of Finding Kinetic Parameters of Catalytic Isomerization of the Pentane-Hexane Fraction Using a Parallel Global Search Algorithm

Kinetic Study on Esterification of Acetic Acid with Isopropyl Alcohol Catalyzed by Ion Exchange Resin

Thermodynamic and Kinetic Study on the Catalysis of Isoamyl Acetate by a Cation-Exchange Resin in an Intensified Fixed-Bed Reactor.

Kinetic Study of Ultrasound-Intensified Biodiesel Production Using Anion Exchange Resin as a Heterogeneous Catalyst

Kinetic study of esterification by immobilized lipase in n-hexane

Reformulated Kinetics of Immobilized Enzymes in Non-Conventional Media: A Case of Lipase-Catalyzed Esterification

Thermodynamic and Kinetic Study on the Catalysis of Isobornyl Acetate by a Cation Exchange Resin an Intensified Fixed-Bed Reactor

Kinetics and thermodynamics of the esterification reaction according to the Langmuir-Hinshelwood mechanism

A Study on Kinetics of Catalytic Esterification of Synthesis of Isoamyl Acetate over Cation-exchange Resin

Modeling of esterification process in industrial poly (ethylene terephthalate) plant based on kinetic mechanism

Theoretical and Kinetic Analysis of the Esterification of Undecylenic Acid with Glycerol

Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst

Green synthesis of ester base oil with high viscosity — Part II: Reaction kinetics study

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal