Abstract:The development of self-compacting lightweight concretes is associated with solving two conflicting tasks: achieving a structure with both high flowability and homogeneity. This study aimed to identify the technological and rheological characteristics of the flow of concrete mixtures D1400…D1600 based on hollow microspheres in comparison with heavy fine-grained D2200 concrete and to establish their structural and physico-mechanical characteristics. The study of the concrete mixtures was carried out using the slump flow test and the rotational viscometry method. The physical and mechanical properties were studied using standard methods for determining average density and flexural and compressive strength. According to the results of the research conducted, differences in the flow behaviors of concrete mixtures on dense and hollow aggregates were found. Lightweight concretes on hollow microspheres exhibited better mobility than heavy concretes. It was shown that the self-compacting coefficients of the lightweight D1400...D1600 concrete mixtures were comparable with that of the heavy D2200 concrete. The rheological curves described by the Ostwald-de Waele equation showed a dilatant flow behavior of the D1400 concrete mixtures, regardless of the ratio of quartz powder to fractionated sand. For D1500 and D1600, the dilatant flow behavior changed to pseudoplastic, with a ratio of quartz powder to fractional sand of 25/75. The studied compositions of lightweight concrete can be described as homogeneous at any ratio of quartz powder to fractional sand. It was shown that concrete mixtures with a pronounced dilatant flow character had higher resistance to segregation. The value of the ratio of quartz powder to fractional sand had a statistically insignificant effect on the average density of the studied concretes. However, the flexural and compressive strengths varied significantly more in heavy concretes (up to 38%) than in lightweight concretes (up to 18%) when this factor was varied. The specific strength of lightweight and heavy concrete compositions with a ratio of quartz powder to fractional sand of 0/100 had close values in the range of 20.4...22.9 MPa, and increasing the share of quartz powder increased the difference between compositions of different densities.

Effect of Coarse Aggregate Gradation and Water-Cement Ratio on Unit Weight and Compressive Strength of No-fines Concrete

Effect of Forepart Strength of Cured-concrete

Effect of Aggregate Gradation on Performance of Concrete

Effect of Volume Fraction of Coarse Aggregate on Elastic Modulus and Compressive Strength of Concrete

Characterization of Rheological and Mechanical Properties of Self-Compacting Concrete with Indian Standard Gradation and Particle Packing Gradations

Effect of Variations in Aggregate Ratios on the Fresh, Hardened, and Durability Properties of Self-Compacting Concrete

Effect of limestone aggregate type and water–cement ratio on concrete strength

The Effect of Fine and Coarse Recycled Aggregates on Fresh and Mechanical Properties of Self-Compacting Concrete

Optimization of Composition and Technological Factors for the Lightweight Fiber-Reinforced Concrete Production on a Combined Aggregate with an Increased Coefficient of Structural Quality

The Effect of Dense and Hollow Aggregates on the Properties of Lightweight Self-Compacting Concrete

IMPACT OF COARSE AGGREGATE ON COMPRESSIVE STRENGTH OF CONCRETE

The Effects of Additives to Lightweight Aggregate on the Mechanical Properties of Structural Lightweight Aggregate Concrete

Concrete Performance Produced Using Recycled Construction and By-Product Industrial Waste Coarse Aggregates

Comparative Study on Ultra High Performance Concrete with and Without Coarse Aggregate by Particle Packing Method

Experimental Prognostication of Ultra-High-Performance Lightweight Hybrid Fiber-Reinforced Concrete by Using Sintered Fly Ash Aggregate, Palm Oil Shell Aggregate, and Supplementary Cementitious Materials

Effect on Compressive Strength of Concrete Using Treated Waste Water for Mixing and Curing of Concrete

Effect of Elevated Temperature on the Lightweight Aggregate Fibre Reinforced Self-Consolidating Concrete

Effect of coarse aggregate size distribution on concrete strength development process

Influence of Coarse Aggregate Type on the Mechanical Strengths and Durability of Cement Concrete

Experimental and Statistical Evaluation of the Interaction Effect of Recycled Aggregate and Water/Cement Ratio on Concrete Compressive Strength

Effect of coarse aggregate content on fracture parameters of concrete