Abstract:Shield tunneling in highly fractured karst water-rich conditions easily results in water inrush disaster or even causes the roof of the karst caves to collapse. Severe water inrush disasters have occurred during the EPB (earth pressure balance) shield machine of the Jinan Metro Line R1 advanced through a karst and fissure groundwater-rich limestone ground in the spring area. To cope with the extreme water inrush risk, a multi-step combined control technology was put forward. First, a detailed geological exploration was carried out by ahead geophysical prospecting using high-density resistivity method, geological radar, etc., and geological borehole drilling was conducted from the ground surface before excavation. As a result, the distribution orientation, size, fissure development degree, and water inflow channel within the surrounding rock of the karst caves were detected. Second, multi-step grouting was performed to reinforce the surrounding rock, including pre-grouting treatment and filling rock blocks to the big karst caves from the ground surface, multiple grouting with a small amount of inert slurry each time inside the tunnel, and secondary circumferential hoop grouting at the shield tail. Third, the tunneling process was optimized, including optimizing the tunneling parameters, making full use of the air-pressurized tunneling technology of the EPB to press bentonite into the fractures around the excavation cabin to seal the fissure water, and using the drainage system of EPB and muck improvement technology to reduce the water inrush disaster. Meanwhile, shield protection slurry technology is applied to cutter inspection and replacement in the pressurized chamber under dynamic water flow environment of the spring terrain. The practice shows that the water inrush on the tunnel face is obviously alleviated after the shield machine advanced into the grouting area. According to statistics, the water inflow on the tunnel face decreases from about 4 m 3 /h before treatment to less than 0.3 m 3 /h after the abovementioned control, and the water seepage between the segmental linings reduces to almost zero. The average advance rate increased from 3 m/day without stopping or even zero when the shield machine needs to shut down 2–3 days for drainage to about 6 m/day. In addition, the treatments prevented the shield machine from jamming and the head descending disaster. This study provided a reliable control method for shield tunneling through the karst and fissure water-rich area and played an essential role in protecting the spring water.

Advance Grouting Technology for a Large Surge Tunnel

Surface Settlements Induced by Tunneling in Permeable Strata: a Case History of Shenzhen Metro

Analysis of the Catastrophe Mechanism and Treatment Countermeasures of a Sudden Water Inrush Disaster in a Long and Deeply Buried Tunnel in the Karst Area

Experimental investigation on grout propagation in poured aggregates for controlling water inrush in tunnels with flowing water

Multi-Step Combined Control Technology for Karst and Fissure Water Inrush Disaster During Shield Tunneling in Spring Areas

Rapid Reinforce Grouting System for Surrounding Rock Masses in Large Underground Water-sealed Storage Caverns

Groundwater Inrush Control and Parameters Optimization of Curtain Grouting Reinforcement for the Jingzhai Tunnel

Hydrogeological analysis and remediation strategies for water inrush hazards in highway karst tunnels

Exploration and Grouting of Large-Scale Water Capsule in the Fault Fracture Zone of Yonglian Tunnel

Grouting for water and mud inrush control in weathered granite tunnel: A case study

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Geological investigation and treatment measures against water inrush hazard in karst tunnels: A case study in Guiyang, southwest China

Grouting Treatment and Parameters Optimization in Watery Karst Areas of High Speed Railway Tunnel Based on Comprehensive Geological Forecast: A Case Study

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

Unfavorable Geology and Mitigation Measures for Water Inrush Hazard during Subsea Tunnel Construction: A Global Review

Grouting techniques for the unfavorable geological conditions of Xiang'an subsea tunnel in China

Investigation on the seepage-stress field evolution mechanism and failure process of karst tunnels in water-rich areas

Key Construction Technologies for Large River-Crossing Slurry Shield Tunnel: Case Study

Optimization Of Curtain Grouting Range for Water-Rich Fault Tunnel

Investigation and practical application of a new cementitious anti-washout grouting material

Research on Seepage of Jointed Rock Mass of Tunnel and Limited Discharge of Grouting