Abstract:Water-and-mud inrush disasters have become a major challenge in underground engineering for the construction of tunnels in sandstone and slate interbedded Presinian strata. Disaster prediction and prevention rely in part on realistic modeling and observation of the disaster process, as well as the identification and examination of the underlying mechanisms. Based on the geological conditions and the historical records of the Xinping Tunnel on the China—Laos Railway, an engineering geological model of the water-and-mud inrush was established. A physical model test that accurately reproduced water-and-mud inrush during tunnel excavation in sandstone and slate interbedded strata was also carried out. Then, testing was conducted that examined the stress and strain, seepage pressure, and high-leakage flow of the surrounding rock. The results indicated that the water-and-mud inrush proceeded through three stages: seepage stage, high-leakage flow stage, and attenuation stage. In essence, the disaster was a catastrophic process, during which the water-resistant stratum was reduced to a critical safety thickness, a water-inrush channel formed, and the water-resistant stratum gradually failed under the influence of excavation unloading and in situ stress—seepage coupling. Parameters such as the stress and strain, seepage pressure, and flow of the surrounding rock had evident stage-related features during water-and-mud inrush, and their variation indicated the formation, development, and evolution of the disaster. As the tunnel face advanced, the trend of the stress—strain curve of the surrounding rock shifted from sluggish to rapid in its speed of increase. The characteristics of strain energy density revealed the erosion and weakening effect of groundwater on the surrounding rock. The seepage pressure and the thickness of the water-resistant stratum had a positive linear relationship, and the flow and thickness a negative linear relationship. There was a pivotal point at which the seepage pressure changed from high to low and the flow shifted from low to high. The thickness of the water-resistant stratum corresponding to the pivotal point was deemed the critical safety thickness.

Study on Mechanism of Water and Mud Inrush in Deep-Buried Large-Section Tunnel Crossing Water-Rich Fault Fracture Zone

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Research on the Evolution Mechanism of Water Inrush in Karst Tunnel and the Safety Thickness of Water-Resisting Rock Mass

Model test of the mechanism underpinning water-and-mud inrush disasters during tunnel excavation in sandstone and slate interbedded Presinian strata

Failure mechanism analysis for tunnel construction crossing the water-rich dense fracture zones: A case study

Large-scale model test for studying the water inrush during tunnel excavation in fault

Water Inrush Mechanism of Fault Zone in Karst Tunnel under Fluid-Solid Coupling Field considering Effective Stress

Investigation on the seepage-stress field evolution mechanism and failure process of karst tunnels in water-rich areas

Physical model experiment research on evolution process of water inrush hazard in a deep-buried tunnel containing the filling fault

Analysis of the Catastrophe Mechanism and Treatment Countermeasures of a Sudden Water Inrush Disaster in a Long and Deeply Buried Tunnel in the Karst Area

Groundwater Inrush Control and Parameters Optimization of Curtain Grouting Reinforcement for the Jingzhai Tunnel

Model test on development characteristics and displacement variation of water and mud inrush on tunnel in fault fracture zone

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Mechanism of water inrush from the tunnel face induced by fault and its application

Analysis method of the water inrush and collapse in jointed rock mass tunnels: A case study

Mud inrush flow mechanisms: a case study in a water-rich fault tunnel

Numerical Simulation of Surrounding Rock Deformation and Grouting Reinforcement of Cross-Fault Tunnel under Different Excavation Methods

DEM-based analysis of water inrush process of underground engineering face with intermittent joints in karst region

Surrounding rock instability mechanism for fault-crossing tunnels in water-rich soft rock

Analysis of the Mechanism of Water Inrush Geohazards in Deep-Buried Tunnels under the Complex Geological Environment of Karst Cave-Fractured Zone

Geo-mechanical model test on excavation and support of deep tunnel crossing a fault under hydro-mechanical coupled condition