Abstract:The objective of the EU project “Sensors Towards Advanced Monitoring and Control of Gas Turbine Engines (acronym STARGATE)” is the development of a suite of advanced sensors, instrumentation and related systems in order to contribute to the developing of the next generation of green and efficient gas turbine engines. One work package of the project deals with the design and development of a long wavelength infrared (LWIR) radiation thermometer for the non-contact measurement of the surface temperature of thermal barrier coatings (TBCs) during the operation of gas turbine engines.For opaque surfaces (e.g. metals or superalloys) radiation thermometers which are sensitive in the near or short wavelength infrared are used as state-of-the-art method for non-contact temperature measurements. But this is not suitable for oxide ceramic based TBCs (e.g. partially yttria stabilized zirconia) as oxide ceramics are semi-transparent in the near and short wavelength infrared spectral region. Fortunately the applied ceramic materials are non-transparent in the long wavelength infrared and additionally exhibit a high emittance in this wavelength region.Therefore, a LWIR pyrometer can be used for non-contact temperature measurements of the surfaces of TBCs as such pyrometers overcome the described limitation of existing techniques. For performing non-contact temperature measurements in gas turbines one has to know the infrared-optical properties of the applied TBCs as well as of the hot combustion gas in order to properly analyse the measurement data. For reaching a low uncertainty on the one hand the emittance of the TBC should be high (>0.9) in order to reduce reflections from the hot surrounding and on the other hand the absorbance of the hot combustion gas should be low (<0.1) in order to decrease the influence of the gas on the measured signal.This paper presents the results of the work performed by the authors with focus on the implementation of the LWIR pyrometer and the selection of the optimal wavelength band where the detector should be sensitive. Besides determining the spectral infrared-optical properties (emittance, transmittance and absorbance) of the TBCs and the hot combustion gas at high temperatures up to 1700K, the wavelength specification of the developed LWIR pyrometer is defined. Also an overview of the LWIR radiation thermometer is given and the preliminary results for different temperatures and environmental conditions are presented. Finally the measurement uncertainty of the LWIR-pyrometer is deduced.

Wall Temperature Measurements in a Full-Scale Gas Turbine Combustor Test Rig With Fiber Coupled Phosphor Thermometry

High-precision 2D surface phosphor thermometry at kHz-rates during flame-wall interaction in narrow passages

Combustor Wall Surface Temperature and Heat Flux Measurement Using a Fiber-Coupled Long Wave Infrared Hyperspectral Sensor

Long wavelength infrared radiation thermometry for non-contact temperature measurements in gas turbines

A Compact Fiber-Coupled NIR/MIR Laser Absorption Instrument for the Simultaneous Measurement of Gas-Phase Temperature and CO, CO2, and H2O Concentration

Precise surface temperature measurements at kHz-rates using phosphor thermometry to study flame-wall interactions in narrow passages

Fiber-coupled LWIR hyperspectral sensor suite for non-contact component surface temperature measurements.

Water-Cooled Fast-Response Wall-Static Pressure Probes for Harsh Combustor Environment Applications

High pressure optical combustion probe

Unsteady Pressure Measurements With a Fast Response Cooled Probe in High Temperature Gas Turbine Environments

High-Temperature Profile Monitoring in Gas Turbine Exhaust-Gas Diffusors with Six-Point Fiber-Optic Sensor Array

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

Minimally-intrusive, dual-band, fiber-optic sensing system for high-enthalpy exhaust plumes

Gas and solid phase temperature measurements of porous media combustion

A study of two optical fibre probe designs for use in high-temperature combustion gases

Comparison of Measurement Techniques for Temperature and Soot Concentration in Premixed, Small-Scale Burner Flames

Experimental investigation of thermal boundary layers and associated heat loss for transient engine-relevant processes using HRCARS and phosphor thermometry

A Compact LWIR Borescope Sensor for 2D Engine Component Surface Temperature Measurement

A high temperature engine materials test facility

Assessment and application of phosphor thermometry for spatially resolved surface temperature measurements during downward flame spread

Development of a high temperature cooled fast response probe for gas turbine applications