Abstract:Current flexible/compliant tactile sensors suffer from low sensitivity and high hysteresis introduced by the essential viscosity characteristic of soft material, either used as compliant sensing element or as flexible coverage. To overcome these disadvantages, this paper focuses on developing a tactile sensor with a smart hybrid structure to obtain comprehensive properties in terms of size, compliance, robustness and pressure sensing ability so as to meet the requirements of limited space applications such as prosthetic fingertips. Employing micro-fabricated tiny silicon-based pressure die as the sensing element, it is easy to have both small size and good mechanical performance. To protect it from potential damage and maintain the compliant surface, a rigid base and a soft layer form a sealed chamber and encapsulate the fixed die together with fluid. The fluid serves as highly efficient pressure propagation media of mechanical stimulus from the compliant skin to the pressure die without any hazard impacting the vulnerable connecting wires. To understand the pressure transmission mechanism, a simplified and concise analytic model of a spring system is proposed. Using easy fabrication technologies, a prototype of a 3 x 3 sensor array with total dimensions of 14mm x 14mm x 6.5mm was developed. Based on the quasi-linear relationship between fluid volume and pressure, finite element modeling was developed to analyze the chamber deformation and pressure output of the sensor cell. Experimental tests of the sensor prototype were implemented. The results showed that the sensor cell had good sensing performance with sensitivity of 19.9 mV N-1, linearity of 0.998, repeatability error of 3.41%, and hysteresis error of 3.34%. The force sensing range was from 5 mN to 1.6 N.

Nanomesh pressure sensor for monitoring finger manipulation without sensory interference

Optical Micro/Nanofiber-Enabled Compact Tactile Sensor for Hardness Discrimination.

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

A User-Friendly Packaging Solution for Silicon-Based Pressure Die to Develop Prosthetic Tactile Sensing

A Novel Silicon Based Tactile Sensor On Elastic Steel Sheet For Prosthetic Hand

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

Fingerprint-inspired Dual-mode Pressure Sensor for Robotic Static and Dynamic Perception

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

Finger‐Skin‐Inspired Flexible Optical Sensor for Force Sensing and Slip Detection in Robotic Grasping

Smart structure with elastomeric contact surface for prosthetic fingertip sensitivity development

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

Sensor Embedded Soft Fingertip for Precise Manipulation and Softness Recognition

A Flexible Tactile Sensor Based On Porous Graphene Sponge For Tiny Force Measurement

Wearable, ultrathin and breathable tactile sensors with an integrated all-nanofiber network structure for highly sensitive and reliable motion monitoring

Touch, press and stroke: a soft capacitive sensor skin

A nanonewton-scale biomimetic mechanosensor

An Intelligent Tactile Sensor Based on Interlocked Carbon Nanotube Array for Ultrasensitive Physiological Signal Detection and Real‐Time Monitoring

Flexible Tactile Electronic Skin Sensor with 3D Force Detection Based on Porous CNTs/PDMS Nanocomposites

Perception of Static and Dynamic Forces with a Bio-inspired Tactile Fingertip

Nanoengineering Ultrathin Flexible Pressure Sensors with Superior Sensitivity and Wide Range via Nanocomposite Structures

Soft Robotic Finger Based on Double-Layer Liquid-Crystal Elastomer with Built-in Grid Structure Pressure Sensor