Abstract:Current flexible/compliant tactile sensors suffer from low sensitivity and high hysteresis introduced by the essential viscosity characteristic of soft material, either used as compliant sensing element or as flexible coverage. To overcome these disadvantages, this paper focuses on developing a tactile sensor with a smart hybrid structure to obtain comprehensive properties in terms of size, compliance, robustness and pressure sensing ability so as to meet the requirements of limited space applications such as prosthetic fingertips. Employing micro-fabricated tiny silicon-based pressure die as the sensing element, it is easy to have both small size and good mechanical performance. To protect it from potential damage and maintain the compliant surface, a rigid base and a soft layer form a sealed chamber and encapsulate the fixed die together with fluid. The fluid serves as highly efficient pressure propagation media of mechanical stimulus from the compliant skin to the pressure die without any hazard impacting the vulnerable connecting wires. To understand the pressure transmission mechanism, a simplified and concise analytic model of a spring system is proposed. Using easy fabrication technologies, a prototype of a 3 x 3 sensor array with total dimensions of 14mm x 14mm x 6.5mm was developed. Based on the quasi-linear relationship between fluid volume and pressure, finite element modeling was developed to analyze the chamber deformation and pressure output of the sensor cell. Experimental tests of the sensor prototype were implemented. The results showed that the sensor cell had good sensing performance with sensitivity of 19.9 mV N-1, linearity of 0.998, repeatability error of 3.41%, and hysteresis error of 3.34%. The force sensing range was from 5 mN to 1.6 N.

Soft Robotic Finger Based on Double-Layer Liquid-Crystal Elastomer with Built-in Grid Structure Pressure Sensor

Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

A User-Friendly Packaging Solution for Silicon-Based Pressure Die to Develop Prosthetic Tactile Sensing

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Development of Fully Flexible Tactile Pressure Sensor with Bilayer Interlaced Bumps for Robotic Grasping Applications.

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

Smart structure with elastomeric contact surface for prosthetic fingertip sensitivity development

Finger‐Skin‐Inspired Flexible Optical Sensor for Force Sensing and Slip Detection in Robotic Grasping

Fingerprint-inspired Dual-mode Pressure Sensor for Robotic Static and Dynamic Perception

A Flexible Tactile Sensor Array Based on Pressure Conductive Rubber for Contact Force Measurement and Slip Detection

Design and simulation of bio-inspired flexible tactile sensor for prosthesis

Flexible Tactile Sensor Array for Distributed Tactile Sensing and Slip Detection in Robotic Hand Grasping

Large‐Area Hand‐Covering Elastomeric Electronic Skin Sensor with Distributed Multifunctional Sensing Capability

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

Sensor Embedded Soft Fingertip for Precise Manipulation and Softness Recognition

Development of Wearable Tactile Sensor Based on Galinstan Liquid Metal for Both Temperature and Contact Force Sensing.

Soft Conductive Hydrogel-Based Electronic Skin for Robot Finger Grasping Manipulation

Touch, press and stroke: a soft capacitive sensor skin

Soft robotic fingers with sensorized pre-charged finger pulp