Modelling and optimization of gasification parameters of downdraft gasifier—an RSM approach
Vikas Attri,Avdhesh Kr. Sharma
DOI: https://doi.org/10.1007/s13399-024-05368-w
IF: 4.05
2024-02-17
Biomass Conversion and Biorefinery
Abstract:The model for downdraft gasifier consuming Acacia nilotica wood as feedstock has been developed to correlate the gas composition (i.e. H 2 , CO), lower heating value (LHV), and cold gas efficiency (CGE) in terms of independent variables—operation time, gas flow rate, and equivalence ratio. Herein, the response surface methodology (RSM) and DOE technique are successfully employed to forecast, while desirability approach based on Box–Behnken design approach is found suitable to optimize the gasification parameters. The sub-models for H 2 , CO, LHV, and CGE are found to be reliable and significant as analysis of variances for each showed high R 2 values (i.e. in range of 98.59–99.15%). Optimization technique based on Box–Behnken design including the desirability function is employed successfully. The presented strategy is found very effective for obtaining the best overall outcomes within close tolerance (i.e. < 4% error). The best settings of independent variables for reaction time, gas flow rate and ER were found to be 34.65 min, 4.99 g/s, and 0.266, respectively. Further, the predicted values of composition of H 2 , CO, and LHV, CGE were 13%, 15.38%, and 4.255 MJ/kg, 70.26%, respectively. The practical implications with the optimized parameters are to supply the quality producer gas to the decentralized power production systems (i.e. gasifier-engine systems) enhancing the performance, clean power production, and contribute a lead role for large rural population/society and thus rural economy.
energy & fuels,engineering, chemical