Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Preparation and Flame Retardancy of Hydrotalcite/Montmorillonite Nanocomposite

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Study on thermal stability of PP/MMT nanocomposites

Preparation and Combustion Properties of Flame Retardant Nylon 6/Montmorillonite Nanocomposite

Preparation and Characterization of Flame Retardant Abs/Montmorillonite Nanocomposite

Synergistic Flammability and Thermal Stability of Polypropylene/aluminum Trihydroxide/fe‐montmorillonite Nanocomposites

Magnesium Hydroxide Sulfate Hydrate Whisker Flame Retardant Polyethylene/montmorillonite Nanocomposites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Effect of the Phosphorus–Nitrogen-Containing Quaternary Ammonium Salt Structure on the Flammability Properties of Poly(methyl Methacrylate)/montmorillonite Nanocomposites

Thermal Properties and Combustion Characterization of Nylon 6/Mgal-Ldh Nanocomposites Via Organic Modification and Melt Intercalation

A polymeric flame retardant and surfactant-free montmorillonite nanocomposites: Preparation and exfoliation mechanism discussion

Thermal Stability, Smoke Emission and Mechanical Properties of Poly(vinyl Chloride)/hydrotalcite Nanocomposites

Preparation and characterization of polystyrene-MgAl layered double hydroxide nanocomposites using bulk polymerization

Morphology, Thermal, and Mechanical Properties of Flame-Retardant Silicone Rubber/Montmorillonite Nanocomposites

Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Polypropylene/Montmorillonite Nanocomposites And Intumescent, Flame-Retardant Montmorillonite Synergism In Polypropylene Nanocomposites

Poly(propylene)/clay nanocomposites and their application in flame retardancy

Intumescent flame retardant-montmorillonite synergism in polypropylene-layered silicate nanocomposites

Combustion Properties of Polypropylene/montmorillonite Nanocomposites

Effect of dispersion of nano-magnesium hydroxide on the flammability of flame retardant ternary composites

Study on Flame Resarded PMMA/Montmorillonite Nanocomposite