Abstract:Leaf Springs find vast applications in different types of mechanical systems. In spite of lot of research, spring steel leaf springs find a lot of applications in all types of heavy vehicle. Weight reduction is one of the present trends in the automotive vehicles and many researchers worked on better materials and design optimization for the same. Composite leaf springs represent some application of composite materials in the field of automotive lightweight materials. This paper is focused to design a natural fibre reinforced hybrid polymer composite mono leaf parabolic spring to replace the existing steel multi-leaf semi-elliptical spring in an attempt of reducing the unsprung mass and investigate its stiffness characteristics by different methods. The spring so designed is analysed for its deflection and hence for its stiffness, by Virtual work method, whose complex integral was solved numerically by Gauss Quadrature. Along with analyzing the stress pattern and making sure the failsafe condition is met, ANSYS is used to construct a model using Solidworks and then use that model to compute the deflection. In the end, three genuine prototypes of the springs were made utilizing match board wooden moulds and the hand lay-up process. These springs were then put through a static load test in a Universal Testing Machine. According to the findings, the spring that is developed to take the place of the present spring will likely have the requisite dynamic and vibration characteristics, and it will also be 83% lighter; as a consequence, it will be suggested as a very excellent replacement. After that, a harmonic disturbance was applied to the springs, and the resulting deflection was analysed. A test rig was built for this specific purpose, and the spring was put under harmonic forcing.

DESIGN AND ANALYSIS OF COMPOSITE LEAF SPRING

Investigation on the Effects of Changing Automotive Vehicles Leaf Springs from Steel to Hybrid Polymer Composite Leaf Springs

Analysis of glass fiber-reinforced composite leaf springs in a light commercial vehicle

Structure Design of GFRP Composite Leaf Spring: An Experimental and Finite Element Analysis

Analyzing the Fatigue Behaviour of E-Glass Fiber Reinforced Interpenetrating Polymer Networks (EP/VP/EV) Leaf Spring

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Stiffness Prediction and Analysis of Composite Leaf Springs

A review of composite leaf springs for automotive vehicles

Design Analysis and Optimization of Coil Spring for Three-Wheeler Vehicles Using Composite Materials

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Finite element analysis of a leaf spring

PERFORMANCE RESEARCH ON LARGE CAST-STEEL NODE UNDER COMPLEX STRESS STATE

Finite Element Analysis on the Stiffness of Leaf Springs

EXPLORING THE MECHANICAL PROPERTIES OF LEAF SPRINGS REINFORCED WITH FIBRE COMPOSITES

Damping and Wear Behavior of 3D Woven Reinforced Structural Composites for Automotive Leaf Spring Applications

Development of leaf spring design in large vehicles made from material type 65 si7 using static analysis with reverse engineering

Explicit Nonlinear Finite Element Geometric Analysis of Parabolic Leaf Springs under Various Loads

Thermal fatigue analysis and structural optimization of sliding composite leaf spring

Stiffness design and mechanical performance analysis of transverse leaf spring suspension

The fracture of two-layer leaf spring: Experiments and simulation

A simple analytical bending stress model of parabolic leaf spring