Abstract:The accumulation of residue soil (generally composed of soil, residue, or mud consolidation) is one of the important causes of damage to the environment limiting urban development. At present, the recycling rate of residue soil in developed countries is as high as 90%, while in China it is less than 5%. In marine construction, reinforced concrete often suffers from corrosion, which leads to a decrease in the service life and durability of the structure. Reactive powder concrete (RPC) with high strength and good corrosion resistance can solve these problems. In order to efficiently dispose of residue soil, protect the environment, and promote urbanization development, this study uses residue soil as a raw material to replace some cement in RPC, and studies the corrosion resistance of it (under dry–wet alternations and freeze–thaw cycles). In this study, five types of reinforced RPC with different residue soil contents (0%, 2.5%, 5%, 7.5%, and 10%) are prepared. Firstly, the working performance of blank freshly mixed residue soil RPC slurry is analyzed. Then, the corrosion resistance of residue-soil-reinforced RPC under the dry–wet alternations with 3% NaCl and freeze–thaw cycles is analyzed through parameters such as mass loss rate, electrical resistivity, ultrasonic velocity, AC impedance spectroscopy, and Tafel. The results show that under the dry–wet alternations, when the residue soil content is 10%, the corrosion rate and corrosion depth of the residue-soil-reinforced RPC are the minimum, at 43,744.84 g/m2h and 640.22 mm/year, respectively. Under the freeze–thaw cycles, the corrosion rate and corrosion depth of the 10% residue soil content group are higher than that of the 5%, being 52,592.87 g/m2h and 769.71 mm/year, respectivley. Compared to the other groups, the reinforced RPC with 10% residue soil content shows good corrosion resistance in both dry–wet alternations and freeze–thaw cycles. Replacing some of the cement in RPC with residual soil to control the amount of residual soil at 10% of the total mass of RPC can effectively improve the corrosion resistance of residue-soil-reinforced RPC and maximize the consumption of residue soil. This plan provides a feasible method for residue soil treatment in the construction industry, while also providing inspiration for research on the corrosion resistance of concrete in marine buildings.

Integrated Study of Geotechnical and Geophysical Methods to Assess the Soil Corrosion Potential for Construction Site

Geophysical and geotechnical characterization of shallow subsurface soil: a case study of University of Peshawar and surrounding areas

Study on the Corrosion Characteristics of Grounding Materials in Acid Red Soil

Electrical Based Sensors and Remote Monitoring System for Assessing the Corrosion Related Activity in Concrete at Hangzhou Bay Bridge

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Electrochemical Corrosion Failure Analysis of Large Complex Engineering Structures by Using Micro-Lpr Sensors

Mild steel corrosion behavior in a coastal megacity relevant to China Pakistan economic corridor

Corrosion of API 5L X60 Pipeline Steel in Soil and Surface Defects Detection by Ultrasonic Analysis

Study of Overprotective-Polarization of Steel Subjected to Cathodic Protection in Unsaturated Soil

The Theory and Implementation of Corrosion Diagnosis for Grounding System

Novel Method Of Corrosion Diagnosis For Grounding Grid

Study on Corrosion Behavior of Copper-Clad Steel Bars with Unclad Two-End Faces for Grounding Grids in the Coastal Soil

AC corrosion behavior and the effect of stone-hard-soil on corrosion process in the earth alkaline rich environment

Soil corrosion of the AISI1020 steel buried near electrical power transmission line towers

Corrosion Behaviors of Metal End of PHC Pipe Pile in Simulated Soil Solutions

Electrical resistivity in the assessment of subsurface lithology and groundwater depth—a case study in Rawalpindi, Pakistan

Corrosion Behavior of Reinforcing Steel in the Immersed Tube Tunnel (ITT) under Submarine Environment

Evaluation of the Influence of the Combination of pH, Chloride, and Sulfate on the Corrosion Behavior of Pipeline Steel in Soil Using Response Surface Methodology

Study on Soil Corrosion Resistance Reinforced with Reactive Powder Concrete in Chloride Environment

A Comprehensive Predictive Corrosion Model Incorporating Varying Environmental Gas Pollutants Applied to Wider Steel Applications

Analysis of external corrosion protection performance on buried gas pipeline using CIPS and DCVG methods