Abstract:Over the last decade, the global fight against climate change through electrification has led to an increase in research on building heating, ventilation, and air conditioning (HVAC) systems that utilize intelligent control algorithms to provide demand-side grid service while also maintaining the thermal comfort of building occupants. As the pivotal point between building electricity consumption and indoor thermal comfort, high-efficiency electrical vapor-compression heat pumps are at the center of these emerging studies, and various grid-interactive and occupant-comfort control algorithms have been developed for them. The impact of these algorithms on heat pump operation and performance when subjected to different weather conditions, building loads, and grid requests calls for investigation and verification via experimental testing with actual heat pumps integrated with real-time building and grid responses. This study introduces a Water-Source Heat Pump (WSHP) Hardware-in-The-Loop (HIL) Test Facility that is the first of its kind. This testbed utilizes a 2-ton variable speed water-to-air heat pump that is capable of interacting with a virtual environment currently comprised of an EnergyPlus (E+) building simulation, an agent-based occupant behavioral model, and a single U-tube ground-loop heat exchanger (GLHE) model. Detailed descriptions of the testbed’s physical design and operation, virtual environement, as well as their mutual communication is provided. An uncertainty analysis is also performed under manufacturer specified heating and cooling design conditions. This analysis shows that the total load across the WSHP’s demand side heat exchanger, i.e., the sum of its latent and sensible components, can be measured with a relative uncertainty of ± 10.4% and ± 3.6% in cooling and heating mode respectively. The WSHP’s coefficient of performance (COP) can be measured with relative uncertainties of ± 10.4% in cooling mode, and ± 3.7% in heating mode. A preliminary 24-h experimental demonstration is then performed utilizing the DOE prototype small commercial office building model in E+. The simulation takes place in Atlanta, GA on the date of 08/26/15 from 12:00 AM to 11:59 PM using TMY3 weather data. . The results from this demonstration show that over the course of this experiment the simulated outputs of zone dry-bulb temperature, zone humidity ratio, and WSHP inlet water temperature can be tracked by testbed emulators up to a root mean squared error (RMSE) of ± 0.27 °C, ± 0.376 g/kg, and ± 0.85 °C respectively. The WSHP’s dynamic behavioral characteristics and performance are also captured, and correspond well with the authors’ previous understanding of heat pump efficiency as a function of evaporator and condenser fluid inlet conditions respectively.

Automated laboratory load-based testing and performance rating of residential cooling equipment

Development of a Hardware-in-the-loop Testbed for Laboratory Performance Verification of Flexible Building Equipment in Typical Commercial Buildings

A Performance Assessment Method for Main HVAC Equipment with Electricity Submetering Data

Design and Development of Performance Rating Apparatus for Cold Room Refrigeration Unit Using Cooling-Load Balance Method

Performance Analysis of the Developed Air Source Heat Pump System at Low-to-Medium and High Supply Temperatures for Irish Housing Stock Heat Load Applications

Performance Analysis Of Room Air Conditioners Via Questionnaire And Integrated Field Test

Performance assessment of a real water source heat pump within a hardware-in-the-loop (HIL) testing environment

Energy Saving Design and Analysis on Performance Test Facility of Large Scale Air-Cooled Heat Pump Package

Optimizing Air Conditioning Systems by Considering the Grades of Sensible and Latent Heat Loads

Advanced Analysis of Operating Parameters Utilizing Big Data to Improve Building Cooling Equipment Energy Efficiency Standards

Performance evaluation of a novel hybrid cooling system combining air source heat pump and urban underground pipe rack

Performance Analysis of Novel Thermal Storage Integrated Heat Pump System in a Residential Building at the Hot Climate for Demand Flexibility

Performance Analysis Of A Carbon Dioxide Heat Pump Installed In A Residential Application

A Comprehensive Evaluation Method for Air-Conditioning System Plants Based on Building Performance Simulation and Experiment Information

All-condition Measuring Methods for Field Performance of Room Air Conditioner

Analysis and Application of Evaluation Method on Compressors for Variable Speed Room Air Conditioners

Performance and economic efficiency analysis of an integrated, outdoor fan-ventilated cooling device

Comprehensive test of ultra-efficient air conditioner with smart evaporative cooling ventilation and photovoltaic

Method for Acquiring Part Load Distribution Coefficient of Air Conditioning System

Multi-connected Air-Conditioning System Standards Analysis and Annual Operating Performance Evaluation

Performance Simulation and Applicability Analysis of Hybrid Air Conditioner in Cooling Season