Abstract:An ultrasonic method and a tetrahydrofuran-mixed dispersion method were used to synthesize two heat-treated cobalt phthalocyanine catalysts supported on carbon nanotubes, CoPc-CNT-S and CoPc-CNT-R, respectively. The ultrasonic process was that mixing cobalt phthalocyanine and carbon nanotubes in isopropanol under ultrasound condition within 30 min, while the tetrahydrofuran-mixed dispersion method was that mixing cobalt phthalocyanine and carbon nanotubes in tetrahydrofuran at 80 degrees C asting 4 h. Then the pyrolysis process was carried out in a tube furnace under Argon (Ar) atmosphere with a heating rate of 5 degrees C/min to 800 degrees C and lasting 2 h. Thermogravimetric Analysis (TGA) results showed that cobalt content of CoPc-CNT-S was 8.1 wt% while CoPc-CNT-R was 7.0 wt%. Moreover, X-ray photoelectron spectroscopy (XPS) results gave a conclusion that nitrogen content of CoPc-CNT-R (5.22%) is twice more than CoPc-CNT-S (2.08%). In comparsion with CoPc-CNT-R, CoPc-CNT-S has more pyrrole nitrogen on the surface. The fuel cell tests in a PEM/AEM hybrid fuel cell showed that the activity and stability of CoPc-CNT-S performed better than CoPc-CNT-R. Power density of CoPc-CNT-S hold at 18.6 mW/cm(2) in H-2/O-2 hybrid AEM/PEM fuel cell for 15 h and CoPc-CNT-R can only hold at 9 mW/cm(2). The current density of CoPc-CNT-S maintain at 68 mA/cm(2) after stability test in H-2/O-2 hybrid AEM/PEM fuel cell for 20 h under 50 mV, but the stablity of CoPc-CNT-S fluctuate between 20 mA/cm(2) to 40 mA/cm(2). The reason can be concluded that ultrasonic method and tetrahydrofuran-mixed dispersion method can cause different kind of nitrogen doped on catalyst to influence electrocatalytic properties. The phenomenon that the electron transfer resistance of CoPc-CNT-S was lower than CoPc-CNT-R after working in PEM/AEM fuel cells for 5 h and 15 h can prove indirectly that the activity of CoPc-CNT-R using for the cathode catalyst H-2/O-2 hybrid AEM/PEM fuel cell is obviously less than CoPc-CNT-S. These observations may result from the cooperative effect from the similar ratio of pyridinic and pyrrolic nitrogen which may accelerate the catalytic activity of CoPc-CNT-S toward oxygen reduction reaction.

The effect of thermal-gas-chemical treatment of carbon black on electrocatalytic activity of electrodes in alkaline fuel cells

Addition of Conductive Particles to Improve the Performance of Activated Carbon Air-Cathodes in Microbial Fuel Cells

Carbon Supported Silver Nanowires with Enhanced Catalytic Activity and Stability Used As A Cathode in A Direct Borohydride Fuel Cell

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Performance improvement of direct carbon fuel cell by introducing catalytic gasification process

Nitrogenous mesoporous carbon coated with Co/Cu nanoparticles modified activated carbon as air cathode catalyst for microbial fuel cell

Electrocatalysis for Oxygen Reduction by Ketjen Black EC 300J Supported Cobalt Porphyrin Complexes after High-temperature Pyrolysis

Effect of Carbon Xerogel Activation on Fe−N−C Catalyst Activity in Fuel Cells

Effect of Pyrolysis Conditions on Nitrogen-Doped Ordered Mesoporous Carbon Electrocatalysts

Comparison of C, Pt/C, Pd/C as cathodic oxygen reduction catalysts in microbial fuel cells

Effect of Nitrogen-Containing Functional Groups of Cobalt Phthalocyanine Catalyst on the Oxygen Reduction Performance in Fuel Cells

Enhanced Electricity Generation and Water Pressure Tolerance Using Carbon Black-Based Sintered Filtration Air-Cathodes in Microbial Fuel Cells

Effect of Supporting Materials on the Electrocatalytic Activity, Stability and Selectivity of Noble Metal-Based Catalysts for Oxygen Reduction and Hydrogen Evolution Reactions

Performance Improvement in Direct Methanol Fuel Cell Cathode Using High Mesoporous Area Catalyst Support

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Facile Synthesis of Nitrogen and Fluorine Co-Doped Carbon Materials As Efficient Electrocatalysts for Oxygen Reduction Reactions in Air-Cathode Microbial Fuel Cells

Effects of Surface Treatment on the Electrocatalytic Performance of Spinel NiCo2O4 and Carbon Nanotubes Composite Catalysts

Polyvinylidene fluoride effects on the electrocatalytic properties of air cathodes in microbial fuel cells

Transmission Electron Microscopy Observation of Corrosion Behaviors of Platinized Carbon Blacks under Thermal and Electrochemical Conditions

Challenging the Activity-Durability Tradeoff of Fe-N-C Fuel Cell Catalysts via Controlling thermal Activation Atmosphere

Effect of Heat Treatment on Structure of Carbon Shell-Encapsulated Pt Nanoparticles for Fuel Cells