Abstract:The reactor nuclear measurement system is important in a nuclear power plant. Its main role is to measure the reactor's core power distribution using detectors and calibrate and provide data on the core fuel consumption. This study describes the lack of fault data and the lack of diagnostic methodology research in the overhauling process and fault diagnosis of the off-heap nuclear measurement system core card. This core card provides the detectors with the necessary working conditions. It also collects signals. In this study, we propose a methodology for the fault diagnosis of the card through circuit analysis, simulation of functional module division, fault data generation, and training of a convolutional neural network diagnostic model. The proposed methodology can transform the drawings into convenient diagnostic processes and algorithms based on expert experience. These drawings are difficult to use in actual overhauling conditions. The corresponding experimental equipment was designed for practical testing. The experimental results show that the accuracy of the obtained diagnostic model for classifying preset faults can reach 99.5%, indicating that this model can be applied in actual working conditions. The accuracy of the trained diagnostic model in classifying 13 kinds of faults in the training set during the actual test was tested. Results show that the accuracy rate is close to 100%. Moreover, the correction of the model using the real maintenance data in applying the actual maintenance conditions was also analyzed. The intelligent diagnostic system that centers on the fault diagnosis method investigated in this study has been applied in the pressurized water reactor off-heap nuclear measurement system digital transformation and upgrading project of Qinshan No. 2 Plant.

Research and application of component classification on CPR1000 units based on AP-913

A Simplified Practical Model of AP1000 Nuclear Power Plants for Power System Dynamic Simulations

Classification Method In Chinese Supervision Regulation On Safety Technology For Stationary Pressure Vessel

Discharge Capacity Analysis of Liquid Effluent Discharge System at CPR1000 Nuclear Power Plant

Research on fault diagnosis of nuclear power first-second circuit based on hierarchical multi-granularity classification network

Verification of the HPR1000 Safety Classification in a Probabilistic Way

Project for Implementation of Maintenance Rule Based on Risk-Informed Safety Classification

Research on Compliance Between Large Break LOCA of HPR1000 and New LOCA Acceptance Criterion 10Cfr50.46c

Preliminary Study on Reliability Analysis of Safety I&C System in NPP

Introduction to SSG-30 Safety Classification Method and Its Preliminary Application in CNHCCB TBS

A Review On The Research Status Of Reliability Analysis Of The Digital Instrument And Control System In Npps

Research and application of system monitoring technology in nuclear power plants

Study on Hse Management System of Ap1000 Nuclear Plant Project

Application of Group Technology to the Part Process of Nuclear Power Products

Development of a simulated main control room (MCR) information display system for AP1000 nuclear power plant

Card fault diagnosis of the pressurized water reactor off-heap nuclear measurement system based on expert experience and convolutional neural network

A Preliminary Research On Software Reliability Model Of Reactor Protection System Of High Temperature Gas-Cooled Reactor-Pebble Bed Module

Automatic Classification and Coding of Low-Level Events in Nuclear Power Plants Based on Machine Learning

Study on Method of Dividing Plume EmergencyPlanning Zone in Nuclear Power Plants

Reliability Research Methods on NPP Operators

Research on Operating Reliability of Multi-Modular High Temperature Gas-Cooled Reactor Nuclear Power Plant Based on Equipment State