Abstract:Purpose This research outlines the development and characterization of advanced composite materials and their potential applications in the aerospace industry for interior applications. Advanced composites, such as carbon-fiber-reinforced polymers and ceramic matrix composites, offer significant advantages over traditional metallic materials in terms of weight reduction, stiffness and strength. These materials have been used in various aerospace applications, including aircraft, engines and thermal protection systems. Design/methodology/approach The development of design of experiment–based hybrid aluminum composites using the stir-casting technique has further enhanced the performance and cost-effectiveness of these materials. The design of the experiment was followed to fabricate hybrid composites with nano cerium oxide (nCeO 2 ) and graphene nanoplatelets (GNPs) as reinforcements in the Al-6061 matrix. Findings The Al6061 + 3% nCeO2 + 3% GNPs exhibited a high hardness of 119.6 VHN. The ultimate tensile strength and yield strength are 113.666 MPa and 73.08 MPa, respectively. A uniform distribution of reinforcement particulates was achieved with 3 Wt.% of each reinforcement in the matrix material, which is analyzed using scanning electron microscopy. Fractography revealed that brittle and ductile fractures caused the failure of the fractured specimens in the tensile test. Practical implications The manufactured aluminum composite can be applied in a range of exterior and interior structural parts like wings, wing boxes, motors, gears, engines, antennas, floor beams, etc. The fan case material of the GEnx engine (currently using carbon-fiber reinforcement plastic) for the Boeing 7E7 can be another replacement with manufactured hybrid aluminum composite, which predicts weight savings per engine of close to 120 kg. Originality/value The development of hybrid reinforcements, where two or more types of reinforcements are used in combination, is also a novel approach to improving the properties of these composites. Advanced composite materials are known for their high strength-to-weight ratio. If the newly developed composite material demonstrates superior properties, it can potentially be used to replace traditional materials in aircraft manufacturing. By reducing the weight of aircraft structures, fuel efficiency can be improved, leading to reduced operating costs and environmental impact. This allows for a more customized solution for specific application requirements and can lead to further advancements in materials science and technology.

Using highly porous aluminum alloys and honeycomb structures in spacecraft landing gear

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Energy-absorption analyses of honeycomb-structured Al-alloy and nylon sheets using modified split Hopkinson pressure bar

Soft-Landing Dynamic Analysis of a Manned Lunar Lander Em-Ploying Energy Absorption Materials of Carbon Nanotube Buckypaper

Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads

Influence of hybrid nanoparticles on the wear behavior of aluminum alloy composites for aerospace applications

Simulation Study of a Composite Landig Gear of Ultralight and Very Light Aircraft

Influence of Structural and Morphological Variations in Orthogonal Trapezoidal Aluminum Honeycomb on Quasi-Static Mechanical Properties

On Aluminum Honeycomb Impact Attenuator Designs for Formula Student Competitions

Out-of-Plane Compression Behaviour of Aluminum Alloy Large-Scale Super-Stub Honeycomb Cellular Structures

Weight Optimization of Design Structural Parameters of Sandwich Composite Shells

Mechanical Properties of Aluminum Foam Filled Re-Entrant Honeycomb with Uniform and Gradient Designs

An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption

Experimental Study on Damage Characteristics of CFRPs/Aluminum Honeycomb Sandwich Structure Impacted by Ultra-High Speed Under High and Low Temperatures

Synthesis and characterization of DOE-based stir-cast hybrid aluminum composite reinforced with graphene nanoplatelets and cerium oxide

Tailoring 3D Star-Shaped Auxetic Structures for Enhanced Mechanical Performance

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

Calculation of the Passenger Aircraft Landing Gear Shock Absorption System Exposed to Impact Loading

Axial mechanical properties of welded orthogonal trapezoidal aluminum honeycomb as filler material for nuclear equipment impact limiter

Experimental and numerical study of in-plane uniaxial compression response of PU foam filled aluminum arrowhead auxetic honeycomb