Abstract:Honeycomb (HC) has been used in energy absorption applications due to its high stiffness and low density. Metallic HC are used for energy absorption applications, however, these metallic structures can be challenging to manufacture if complex geometric features designed to improve energy absorption are used, which motivates the use of additive manufacturing (AM). Metal AM methods include powder bed fusion (PBF) and direct energy deposition (DED). In addition to capital equipment cost, these processes possess challenges that include a required inert environment, powder handling, final part porosity, residual stresses, and nonuniform surface finish. These concerns can be alleviated through the use of polymer AM, however, polymeric parts exhibit brittle failure and have a lower stiffness than metallic HC structures. In this study, a low-cost 3D polymer printing method, stereolithography (SLA), is combined with a conventional electroplating process to fabricate a metal-plastic composite HC structure with energy absorption capability much greater than of a plastic HC structures of the same nominal volume. SLA parts have a smooth surface, so that the surface finish is at least as uniform after electroplating as the SLA part. The energy absorption characteristics of the electroplated HC is studied to determine how these energy absorbing materials can be manufactured at reduced cost. Our study confirms that the metal-plastic composite HC increases both the crush strain range and the mean crush stress of these samples, resulting in metal-plastic composite HC structures with substantially increased energy absorption. This study also examines how buckling initiators (BIs), or diamond shaped holes located at 50, 75, and 100% of the height of the hexagonal cell vertices, can influence energy absorption performance. This study shows that it is feasible to fabricate electroplated HCs, using an SLA preform, to achieve a substantial increase in energy absorption over using SLA alone.

Energy-absorption analyses of honeycomb-structured Al-alloy and nylon sheets using modified split Hopkinson pressure bar

Experimental Analyses on Energy Absorption Property of Aluminum Honeycomb under Out-of-Plane Compression

Hierarchical nested honeycomb-based energy absorbers: design factors and tailorable mechanical properties

Evaluation of Cell Parameter Variation on Energy Absorption Characteristic of Thermoplastic Honeycomb Sandwich Structure

The energy-absorbing characteristics of carbon fiber-reinforced epoxy honeycomb structures

Crashworthiness Analysis on Alternative Square Honeycomb Structure under Axial Loading

Experimental study on out-of-plane mechanical and energy absorption properties of combined hexagonal aluminum honeycombs under dynamic impact

Simulation study on the anti-penetration performance and energy absorption characteristics of honeycomb aluminum sandwich structure

High-velocity impact performance of sandwich panels with additively manufactured hierarchical honeycomb cores: An experimental and numerical study

Numerical and experimental analyses on series aluminum honeycomb structures under quasi-static load

The study of honeycomb material dynamic mechanical properties which under out-plane impact load

Energy absorption of a bio-inspired honeycomb sandwich panel

Energy absorption analysis under in-plane impact of hexachiral honeycomb with different arrangements

Electroplating Additively Manufactured Honeycomb Structures to Increase Energy Absorption Under Quasi-Static Crush

In-plane Dynamics Crushing of a Combined Auxetic Honeycomb with Negative Poisson's Ratio and Enhanced Energy Absorption

Investigation of the Effects of Core Thickness on Low Velocity Impact Behaviors of Aluminum Honeycomb Composites

Tailored energy absorption for a novel auxetic honeycomb structure under large deformation

Visco-Elastic Honeycomb Structures with Increased Energy Absorption and Shape Recovery Performance Using Buckling Initiators

Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads

Study on energy absorption of paper honeycomb sandwich tube filled by polyethylene foam under axial loading

Ballistic resistance of a novel re-entrant auxetic honeycomb under in-plane high-velocity impact