Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

Recent advances in graphene-based materials for dye-sensitized solar cell fabrication

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2photoanode

Graphene-Based Dye-Sensitized Solar Cells: A Review

CHAPTER 8. Highly Efficient Dye-sensitized Solar Cells with Integrated 3D Graphene-based Materials

Hybrid Graphene/metal Oxide Anodes for Efficient and Stable Dye Sensitized Solar Cell

Enhanced Electrocatalytic Performance Of Graphene Via Incorporation Of Sio2 Nanoparticles For Dye-Sensitized Solar Cells

Graphene scaffolds enhanced photogenerated electron transport in ZnO photoanodes for high-efficiency dye-sensitized solar cells

Organic solar cells: Current perspectives on graphene‐based materials for electrodes, electron acceptors and interfacial layers

Efficient Electrocatalysts for Dye-Sensitized Solar Cells

Recent development in two-dimensional material-based advanced photoanodes for high-performance dye-sensitized solar cells

Towards sustainable solar cells: unveiling the latest developments in bio-nano materials for enhanced DSSC efficiency

Theoretical insights into the effect of pristine, doped and hole graphene on the overall performance of dye-sensitized solar cells

Interface Functionalization Of Photoelectrodes With Graphene For High Performance Dye-Sensitized Solar Cells

Graphene films decorated with metal sulfide nanoparticles for use as counter electrodes of dye-sensitized solar cells

Performance enhancement of dye-sensitized solar cells by incorporating graphene sheets of various sizes

Dye-sensitized solar cells: Fundamentals, recent progress, and Optoelectrical properties improvement strategies

DFT Studies on a Metal Oxide@Graphene-Decorated D-π1-π2-A Novel Multi-Junction Light-Harvesting System for Efficient Dye-Sensitized Solar Cell Applications

A review on advanced counter electrode materials for high-efficiency dye sensitized solar cells

Enhanced visible light harvesting in dye-sensitized solar cells through incorporation of solution-processable silver plasmons and anthracite-derived graphene quantum dots

Graphene in photovoltaic applications: organic photovoltaic cells (OPVs) and dye-sensitized solar cells (DSSCs)