Abstract:At present, high-speed underwater acoustic communication requires underwater transducers with the characteristics of low frequency and broadband. The low-frequency transducers also are expected to be low-frequency directional for realization of point-to-point communication. In order to achieve the above targets, this paper proposes a new type of flextensional transducer which is constructed of double mosaic piezoelectric ceramic rings and spherical cap metal shells. The transducer realizes broadband transmission by means of the coupling between radial vibration of the piezoelectric rings and high-order flexural vibration of the spherical cap metal shells. The low-frequency directional transmission of the transducer is realized by using excitation signals with different amplitude and phase on two mosaic piezoelectric rings. The relationship between transmitting voltage response (TVR), resonance frequency and structural parameters of the transducer is analyzed by finite element software COMSOL. The broadband performance of the transducer is also optimized. On this basis, the low-frequency directivity of the transducer is further analyzed and the ratio of the excitation signals of the two piezoelectric rings is obtained. Finally, a prototype of the broadband ring flextensional underwater transducer is fabricated according to the results of simulation. The electroacoustic performance of the transducer is tested in an anechoic water tank. Experimental results show that the maximum TVR of the transducer is 147.2 dB and the operation bandwidth is 1.5-4 kHz, which means that the transducer has good low-frequency, broadband transmission capability. Meanwhile, cardioid directivity is obtained at 1.4 kHz and low-frequency directivity is realized.

Ultra-wideband underwater acoustic transducer with a gradient impedance matching layer

Broadband Gradient Impedance Matching Using an Acoustic Metamaterial for Ultrasonic Transducers

Broadband ultrasonic transducer based on nested composite structure with gradient acoustic impedance

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

A Real-Time 3-D Underwater Acoustical Imaging System

Gradient Impedance Matching Layers Enable Broadband Water-Air Sound Transmission

The study of matching layers for high-end ultrasonic transducers

Ultra-broadband underwater meta-absorber with gradient impedance-matched composite material

Design simulation and analysis of deep-sea transducer

Research and Fabrication of Broadband Ring Flextensional Underwater Transducer

Novel multi-layer-composites design for ultrasonic transducer applications

Optimized Backing Layers Design for High Frequency Broad Bandwidth Ultrasonic Transducer

Hydroacoustic High Absorption with Broadband and Wide-Angle Impedance Matching

Micromechanical Piezoelectric Micromachined Ultrasonic Transducer array package enhancement with integrated frontliners

Design of Portable Three-Dimensional Sonar for Both Far-Field and Near-Field

Complementary Acoustic Metamaterial for Penetrating Aberration Layers

Gradient index metamaterials for broadband underwater sound absorption

Compact meta-differentiator for achieving isotropically high-contrast ultrasonic imaging

Design and Fabrication of an Underwater Transducer Based on the Shear Vibration Mode and Trapezoid Transition Layer

Ultra-Wideband Tapered Transducers in Thin-Film Lithium Niobate on Silicon Carbide

Matching layer design of a 2–2 piezo-composite ultrasonic transducer for biomedical imaging