Abstract:We present a new concept of bearingless slice motor that levitates and rotates a ring-shaped solid rotor. The rotor is made of a semi-hard magnetic material exhibiting magnetic hysteresis, such as D2 steel. The rotor is radially biased with a homopolar permanent-magnetic flux, on which the stator can superimpose 2-pole flux to generate suspension forces. By regulating the suspension forces based on position feedback, the two radial rotor degrees of freedom are actively stabilized. The two tilting degrees of freedom and the axial translation are passively stable due to the reluctance forces from the bias flux. In addition, the stator can generate a torque by superimposing 6- pole rotating flux, which drags the rotor via hysteresis coupling. This 6-pole flux does not generate radial forces in conjunction with the homopolar flux or 2-pole flux, and therefore the suspension force generation is in principle decoupled from the driving torque generation. We have developed a prototype system as a proof of concept. The stator has twelve teeth, each of which has a single phase winding that is individually driven by a linear transconductance power amplifier. The system has four reflective-type optical sensors to differentially measure the two radial degrees of freedom of the rotor. The suspension control loop is implemented such that the phase margin is 25 degrees at the cross-over frequency of 110 Hz. The prototype system can levitate the rotor and drive it up to about 1730 rpm. The maximum driving torque is about 2.7 mNm.

New Configuration of Five-Axis Passively Stabilized Bearingless Machine With a Diamagnetic Pyrolytic Graphite Rotor

Decoupled Vector Control Scheme for Dual-Armature Flux-Switching Permanent Magnet Machines

Principle and simulation of a 5-phase bearingless permanent magnet-type synchronous motor

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

Principle And Realization Of A 5-Phase Pm Bearingless Motor Drive

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Analysis of a New 5-Phase Bearingless Induction Motor

A New self-propelled magnetic bearing with helical windings

Analysis and Experiment of a 6-Phase Bearingless Induction Motor

Analysis and Control of Seven-Phase Permanent-Magnet Bearingless Motor with Single Set of Half-Coiled Winding.

Analysis and Control of Multiphase Permanent-Magnet Bearingless Motor With a Single Set of Half-Coiled Winding

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Novel Bearingless Machine with a Single Set of Multiphase Windings

Homopolar Bearingless Slice Motor with Flux-biasing Halbach Arrays

Study on Inverter-fed Three-pole Active Magnetic Bearing

Design and implementation of a novel interior permanent magnet bearingless slice motor

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Active Control of Bearing Force Transmissibility for Active Magnetic Bearings-rigid Rotor Systems

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Study on Design and Control of Permanent-Magnet-type Bearingless Motor

Hysteresis Bearingless Slice Motors with Homopolar Flux-biasing