Abstract:Silicalite-1-type zeolites with unique intracrystal holes or cracks were successfully prepared using a cellulose nanofiber (CNF) as an additional mediating material, and their vapor phase adsorption properties toward methyl tert-butyl ether (MTBE) and n-nitrosodimethylamine (NDMA) were examined. It was found that the mixing protocol of CNF and structure-directing agents (SDAs), the addition amount of CNF, and the CNF/SDAs amount ratio play important roles in forming the holed silicalite-1. The synthesis route that preliminarily mixes CNF with SDAs in a series of controlled conditions is particularly beneficial for the formation of the holed silicalite-1 with mesoporosity and larger pores because the CNF-SDAs composite structure benefits the zeolite growth closely encompassing CNF inside the crystal structure. It also promotes the preferential formation of the orthorhombic phase vicinal to the CNF surface, namely, the surface of the formed internal holes or cracks, with the twin-type crystal size reduced as compared to the non-CNF-templated sample. On the contrary, the synthesis route that mixes CNF with SDAs-silicate composite ions tends to modify the twin-type crystal shape at the same time to form small but uniform well-crystallized particles with less holes or cracks and a dominative monoclinic phase. It was considered that both the inter-subunit structural defect and silanol defect whose content is increased with CNF addition influence the adsorptivity of MTBE and NDMA. Owing to the small twin-type crystal size, the smaller crystal subunits, and the favored short path from the surface of internal holes or cracks, the holed silicalite-1 derived from the CNF and SDA premixture assures the easiest access of adsorbate molecules to the most energetically favored sites and is most appropriate for the adsorption of both MTBE and NDMA among the examined zeolites.

Cellulose Nanofibrils as a Damping Material for the Production of Highly Crystalline Nanosized Zeolite Y via Ball Milling

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Ball Milling for Biomass Fractionation and Pretreatment with Aqueous Hydroxide Solutions

Fabrication of Zeolite Naa Membranes on Hollow Fibers Using Nano-Sized Seeds Exfoliated from Mesoporous Zeolite Crystals

Microstructure and surface activity of mechanically-dispersed cellulose nanofiber aqueous sol

Rapid and Facile Synthesis of Nanosized Silicalite-1 Zeolites from Solid Silica in a Semisolid-like System Via a Two-Step Crystallization Method

Effect of Ball Milling on the Production of Nanocellulose Using Mild Acid Hydrolysis Method

Self-supported MOF/cellulose-nanocrystals materials designed from ultrafiltration.

Cellulose nanocrystals (CNCs) as hard templates for preparing mesoporous zeolite Y assemblies with high catalytic activity

Isolation of Cellulose Nanofibers (CNFs) based on Ball-milling Technique Combined with Supercritical Carbon dioxide/ethanol Pretreatment

Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers

Methylcellulose-Directed Synthesis of Nanocrystalline Zeolite NaA with High CO2 Uptake

Acidified ZnCl2 molten salt hydrate systems as hydrolytic media for cellulose I and II nanocrystal production: from rods to spheres

Combining and concentrating nanocelluloses for cryogels with remarkable strength and wet resilience

Cellulose-Nanofiber-Mediated Sorption-Benefitting Holed Silicalite-1 Crystals.

Characterization of cellulose nanocrystals from Zhombwe (Neorautanenia brachypus (harms) CA Sm.) bagasse

Ball milling of jute fibre wastes to prepare nanocellulose

Studying the Effect of Shortening Carbon Nanotubes via Ball Milling on Cellulose Acetate Nanocomposite Membranes for Desalination Applications

The interactions between zeolite and two cellulose derivatives: A comprehensive analysis of liquid and solid phase properties

Implanting Colloidal Nanoparticles into Single‐crystalline Zeolites for Catalytic Dehydration

Effect of faujasite zeolites on the thermal stability and degradation kinetics of nitrocellulose