Abstract:To address the issues of large imaging errors for small defects and the difficulty in depth evaluation using local wavenumber estimation for surface defect imaging, a novel three-dimensional (3D) evaluation method for surface defects using broadband laser-generated Rayleigh waves with wavenumber analysis is proposed. A finite element model is established to investigate the interaction between the Rayleigh wave and the surface defect and reveal the wavenumber change mechanism of the non-dispersive Rayleigh wave in the case of defects. It is discovered that when the Rayleigh wave encounters the surface defect, various mode-converted scattered waves are generated, resulting in the appearance of new components with wavenumbers lower than that of the incident Rayleigh wave in the wavenumber domain. Additionally, the maximum amplitude of the Rayleigh wave in the B-scan image increases as the defect depth increases. Based on the simulation analysis, a 3D evaluation method for surface defects is proposed. Firstly, the scattered Rayleigh wave caused by the defect is extracted using frequency-wavenumber analysis. Secondly, a space-frequency-wavenumber analysis is used to determine the local wavenumber of the scattered Rayleigh wave for defect imaging. Finally, the defect depth is estimated by analyzing the maximum amplitude of the Rayleigh wave. A surface defect detection experiment is conducted to verify the effectiveness of the proposed method, and the experimental results demonstrate that the proposed method can suppress noise interference and accomplish high-precision imaging of small surface defects compared to the traditional method. Moreover, the method can establish a linear mapping relationship between the defect depth and the maximum amplitude of the Rayleigh wave for depth evaluation. The research results can provide a potential application for the 3D evaluation of surface defects.

Study on Deduction Method of Volume Scattering Noise of the Laser Scattering Image on the Ultra-smooth Optical Substrate Surface

The Influence of Noise on the Restoration of Diffraction-Limited Images

Error Analysis of Sub-Aperture Synthesis for Detecting Surface Defects of Optical Components

Numerical simulation research and applications on scattering imaging of surface defects on optical components

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Simulation and Analysis of Light Scattering by Air Bubble in Optical Glass

Dark-field detection method of shallow scratches on the super-smooth optical surface based on the technology of adaptive smoothing and morphological differencing

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Defects Evaluation System for Spherical Optical Surfaces Based on Microscopic Scattering Dark-Field Imaging Method

Automated Discrimination Between Digs and Dust Particles on Optical Surfaces with Dark-Field Scattering Microscopy

Detection of Defects in Optics Based on Scanning

Research on Adaptive Denoising Method for Surface Roughness Measuring

Adaptive Wavelet Thresholding Based Ultrasonic Signal Denoising

Detection of Micro-Sized Air Bubble Defects in Optical Glass Based on Mie Theory

Surface Measurement Methods Based on Single and Multi-Frequency Fringes and Its Applications in Reverse Engineering

Research On Laser Ultrasonic Visual Image Processing

The Directional Diffusion Based on Discrete Wavelet Algorithm to Achieve Side-Scan Sonar Image Denoising

Edge-Aware Volume Smoothing Using L-0 Gradient Minimization

Study of Ray Tracing Algorithm in the Scattering of Nano-particle Thin Films

Theoretical and experimental investigations of speckle features based on free-space surface scattering

De-noising Study Based on Wavelet Transform in Radiant Images