Abstract:The recycling of construction and demolition waste (CDW) for the extraction of recycled concrete aggregates (RCAs) to be used to produce recycled aggregate concrete (RAC) is widely acknowledged internationally. However, CDW not only contains concrete debris but may also contain burnt clay bricks. The recycling of such CDW without the segregation of different components would result in recycled aggregates having different proportions of concrete and brick aggregates. The utilization of these aggregates in concrete requires a detailed investigation of their mechanical and durability properties. In this regard, the present study focused on investigating the mechanical and durability properties of hybrid recycled aggregate concrete (HRAC) made by the 100% replacing of natural aggregates with recycled brick (RBAs) and RCA in hybrid form. The partial replacement of cement with fly ash was also considered to reduce the corban footprint of concrete. An extensive experimental program was designed and carried out in two phases. In the first phase, a total of 48 concrete mixes containing coarse RBA and RCA in mono and hybrid forms were prepared and tested for their compressive strength. The test results indicated that the compressive strength of HRAC is greatly affected by the proportion of coarse RBA and RCA. In the second phase, based on the results of the first phase, eight concrete mixes with the most critical proportions of RBA and RCA in hybrid form were selected to evaluate their mechanical and durability performance. In addition, four mixes with natural aggregates were also prepared for comparison purposes. To evaluate the mechanical properties of the concrete mixes, compressive strength and modulus of rupture (MOR) tests were performed, while for the evaluation of durability properties, water absorption and behavior after exposure to aggressive conditions of acidic and brine solutions were studied. The results revealed that a 20% replacement of cement with fly ash resulted in acceptable mechanical and durability properties of HRAC intended to be used for making concrete bricks or pavers.

Hardened state behavior of beneficiated recycled aggregate concrete

Steel Corrosion and Corrosion-Induced Cracking in Reinforced Concrete with Carbonated Recycled Aggregate

Influence of Construction Conditions on Properties of Recycled Concrete

Influence of bio-deposited recycled aggregate on the concrete properties

Feasibility study of RAP aggregates in cement concrete pavements

Unlocking the Role of Recycled Aggregates in the Performance Enhancement and CO2 Capture of Reactive Magnesia Cement Formulations

High-quality recycled concrete aggregates developed through an integrated thermomechanical approach

Experimental Study on Self Compacting Fibrous Concrete Comprising Magnesium Sulphate Solution Treated Recycled Aggregates

Fresh and hardened properties of concrete made with recycled brick aggregate

Mechanical and Durability Characterization of Hybrid Recycled Aggregate Concrete

Understanding the behavior of recycled aggregate concrete by using thermogravimetric analysis

Improving the physical and mechanical properties of recycled concrete aggregate: A state-of-the-art review

Property Enhancement of Recycled Coarse Aggregate and Its Concrete under CO2-Accelerated Curing Treatment

Mechanical and microstructural characteristics of structural concrete containing RCA treated with sodium metasilicate

Chloride ion permeability improvement of recycled aggregate concrete using pretreated recycled aggregates by silica fume slurry

Influence of different treatment methods on the mechanical behavior of recycled aggregate concrete: A comparative study

Mechanical Properties and ITZ Microstructure of Recycled Aggregate Concrete Using Carbonated Recycled Coarse Aggregate

Durability performance of alkali-activated concrete with pre-treated coarse recycled aggregates for pavements

Study On Properities Of Recycled Concrete Aggregate And Influence Of It On Properities Of Concrete

Mechanical properties of recycled concrete with demolished waste concrete aggregate and clay brick aggregate