Abstract:In this study, we evaluated the use of prickly pear seed cake, a by-product of prickly pear seed oil extraction, as a new precursor for producing activated carbon by phosphoric acid activation, and the obtained carbon’s capacity for heavy metal removal from aqueous solution. Response surface methodology based on the full factorial design at two levels (24) was developed to reduce the number of experiments and reach optimal preparation conditions for the removal of cadmium and lead ions from aqueous solutions. Design Expert 11.1.2.0 Trial software was used for generating the statistical experimental design and analyzing the observed data. Factors influencing the activation process, such as carbonization temperature, activation temperature, activation time, and impregnation ratio, were studied. Responses were studied in depth with an analysis of variance to estimate their significance. Each response was outlined by a first-order regression equation demonstrating satisfactory correspondence between the predicted and experimental results as the adjusted coefficients of correlation. Based on the statistical data, the best conditions for the removal of heavy metals from aqueous solution by the obtained activated carbon were indicated. The maximum iodine number and methylene blue index were 2527.3 mg g−1 and 396.5 mg g−1, respectively, using activated carbon obtained at the following conditions: Tc = 500 °C, Ta = 500 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of two hours. The maximum adsorption reached 170.2 mg g−1 and 158.4 mg g−1 for Cd2+ and Pb2+, respectively, using activated carbon obtained at the following conditions: Tc = 600 °C, Ta = 400 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of one hour. The activated carbon obtained was characterized by Boehm titration, pH of point of zero charge (pHPZC), Brunauer–Emmett–Teller surface area (SBET), and scanning electron microscopy. Adsorption was performed according to different parameters: pH solution, adsorbent dosage, temperature, contact time, and initial concentration. Regeneration experiments proved that the obtained activated carbon still had a high removal capacity for Cd2+ and Pb2+ after five regeneration cycles.

Experimental design study of nickel removal from aqueous solution by activated carbon and its pore size distribution modification using carbon dioxide gasification for enhancing adsorption efficiency

Removal of Aqueous Ni(Ii) with Carbonized Leaf Powder: Kinetics and Equilibrium

Efficient Removal of Nickel from Wastewater Using Copper Sulfate-Ammonia Complex Modified Activated Carbon: Adsorption Performance and Mechanism

Nitrogen Doping of Activated Carbon Loading Fe2O3 and Activity in Carbon-Nitric Oxide Reaction

Nickel Loaded on Carbon Materials Prepared From Co-pyrolysis of Biochar and Caking Coal for Catalytic Conversion of Volatiles

The Reactivity of Surface Active Carbonaceous Species with CO2 and Its Role on Hydrocarbon Conversion Reactions

Optimization of the Preparation of Activated Carbon from Prickly Pear Seed Cake for the Removal of Lead and Cadmium Ions from Aqueous Solution

Evaluation of adsorption efficiency of activated carbon functionalized with methyl diethanolamine in carbon dioxide gas

Nanoporous Metatitanic acid on γ-Al2O3 aerogel for higher CO2 adsorption capacity and lower energy consumption

Atomic nickel on controllable mesoporous carbon nanospheres to boost electrochemical carbon dioxide reduction

Elucidating the origin of catalytic activity of nitrogen-doped carbon coated nickel toward electrochemical reduction of CO 2

Reaction Characteristics of Ni-Based Catalyst Supported by Al2O3 in a Fluidized Bed for CO2 Methanation

Effective removal of industrial dye from aqueous solution using mesoporous nickel oxide: a complete batch system evaluation

Effect of reduction and reaction conditions on the catalytic performance of Co–Ni/Al2O3 catalyst in CO hydrogenation: modeling of surface reaction rate

Highly-dispersed nickel species on nitrogen-doped porous carbon: Significant local pH-buffering capacity and favorable CO desorption for efficient and robust electro-reduction of CO 2

Adsorption of Nitrogen Dioxide on Nitrogen-Enriched Activated Carbons

Effect of nickel-based electrocatalyst size on electrochemical carbon dioxide reduction: A density functional theory study

Optimizing Adsorption of Co(II) and Ni(II) by 13× Molecular Sieves Using Response Surface Methodology

Experimental Study on the Thermal Reduction of CO2 by Activated Solid Carbon-Based Fuels

Experimental, RSM modelling, and DFT simulation of CO2 adsorption on Modified activated carbon with LiOH

Removal of CO by Water–Gas Shift Reaction over Bimetal CeO2 and Ni Nanoparticles Dispersed in Carbon Micro-nanofibers