Abstract:The current study aims to evaluate the performance of the ultrasonic vibration-assisted milling (USVAM) process when machining two different materials with high deviations in mechanical properties, specifically 7075 aluminium alloy and Ti-6Al-4V titanium alloy. Additionally, this study seeks to develop an AI-based model to predict the process performance based on experimental data for the different workpiece characteristics. In this regard, an ultrasonic vibratory setup was designed to provide vibration oscillations at 28 kHz frequency and 8 μm amplitude in the cutting feed direction for the two characterised materials of 7075 aluminium alloy (150 BHN) and Ti-6Al-4V titanium alloy (350 BHN) workpieces. A series of slotting experiments were conducted using both conventional milling (CM) and USVAM techniques. The axial cutting force and machined slot surface roughness were evaluated for each method. Subsequently, Support Vector Regression (SVR) and artificial neural network (ANN) models were built, tested and compared. AI-based models were developed to analyse the experimental results and predict the process performance for both workpieces. The experiments demonstrated a significant reduction in cutting force by up to 30% and an improvement in surface roughness by approximately four times when using USVAM compared to CM for both materials. Validated by the experimental findings, the ANN model accurately and better predicted the performance metrics with RMSE = 0.11 μm and 0.12 N for Al surface roughness and cutting force. Regarding Ti, surface roughness and cutting force were predicted with RMSE of 0.12 μm and 0.14 N, respectively. The results indicate that USVAM significantly enhances milling performance in terms of a reduced cutting force and improved surface roughness for both 7075 aluminium alloy and Ti-6Al-4V titanium alloy. The ANN model proved to be an effective tool for predicting the outcomes of the USVAM process, offering valuable insights for optimising milling operations across different materials.

Correlation analysis of noise sound pressure and vibration in aluminum alloy milling

Analysis and Control of Vibration and Noise Induced by Sliding-Friction of Silver-Based Alloy

Research on the combined prediction model of milling sound pressure level based on force-thermal-vibration multi-feature fusion

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

Research on Noise Test and Distribution Model of Different Groove Inserts in Dry Milling Process

An approach to correlate friction-induced noise with coefficient of friction

Ultrasonic vibration-assisted milling of aluminum alloy

Force prediction in ultrasonic vibration-assisted milling

Prediction and analysis of cold rolling mill vibration based on a data-driven method

Experimental Study on Ultrasonic-Assisted End Milling Forces in 2195 Aluminum-Lithium Alloy

Study on Correlation Between Parameters of "single Factor" Constitutive Model and Temperature for 7050 Aviation Aluminum-Alloy

Sound Detection Monitoring Tool in CNC Milling Sounds by K-Means Clustering Algorithm

Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant

Study of different cutting fluids effect on the coupling characteristics of milling noise-vibration and surface roughness of TA2 pure titanium

AI-Based Prediction of Ultrasonic Vibration-Assisted Milling Performance

Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network

Reliability analysis of chatter stability for milling process system with uncertainties based on neural network and fourth moment method

Extenuating Chatter Vibration in Milling Process Using a New Ensemble Approach

Residual stress prediction in ultrasonic vibration–assisted milling