Abstract:Electrochemical double-layer capacitor (EDLC) is an evolving member in the energy storage movement which really plays a major part in satisfying the power demands of electronic devices and systems. Today, a substantial interest is paid on environmental friendly, cheap and safe devices in the modern world. Therefore, the present study was carried out to fabricate EDLCs using natural rubber-based solid polymer electrolytes (SPEs) and exfoliated graphite electrodes which possess many of those requirements. Electrolyte was prepared using ammonium trifluoromethanesulfonate (NH4CF3SO3–NH4TF) as the salt, titanium dioxide (TiO2) as a nano additive, propylene carbonate (PC) as a solvent and 49 methyl groups grafted natural rubber (MG49) as the polymer. First, electrolytes having different salt compositions were prepared using solvent casting method. Minced NR was dissolved in tetrahydrofuran (THF) using magnetic stirring. NH4TF solution was prepared separately. MG49 and NH4TF solutions were then mixed together and stirred further. It was then poured into caped petri dish and the solvents were left to slowly evaporate. This procedure was repeated several times for different salt compositions. The optimised composition was found as NR:0.4 NH4TF (by weight basis) having a room temperature conductivity of 3.82 × 10–4 S/cm. TiO2 and PC were added to this optimised composition to enhance the conductivity. The highest room temperature conductivity obtained was 7.10 × 10–4 S/cm for the composition, NR:0.4 NH4TF:10%PC:10%TiO2. Exfoliated graphite electrodes were prepared using natural graphite. The characterisation of EDLC was done by using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge discharge (GCD) test. Single electrode specific capacitance of the EDLC was found to be 1.68 F/g from CV test. Discharge capacitance was 0.78 F/g from the GCD test. Moreover, a good cyclic stability was observed. This novel natural rubber and natural graphite-based EDLC can be used as an energy storage device with further modifications.

Suitability of natural rubber-based polymer electrolyte for energy storage

Novel study on a safe, low-cost natural rubber: Mg-based solid polymer electrolyte for energy storage

A novel redox capacitor with a natural rubber-based solid polymer electrolyte for energy applications

1-Ethyl-3-methylimidazolium trifluoromethanesulfonate-based gel polymer electrolyte for application in electrochemical double-layer capacitors

Electric double-layer capacitors with tea waste derived activated carbon electrodes and plastic crystal based flexible gel polymer electrolytes

Compatible Solid Polymer Electrolyte Based on Methyl Cellulose for Energy Storage Application: Structural, Electrical, and Electrochemical Properties

Preparation and characterization of 1-ethyl-3-methylimidazolium chloride–based gel polymer electrolyte in electrochemical double-layer capacitors

The EDLC Energy Storage Device Based on a Natural Gelatin (NG) Biopolymer: Tuning the Capacitance through Plasticizer Variation

A Polymer Blend Electrolyte Based on CS with Enhanced Ion Transport and Electrochemical Properties for Electrical Double Layer Capacitor Applications

The study of EDLC device fabricated from plasticized magnesium ion conducting chitosan based polymer electrolyte

Insight into structure-property correlations in plasticized sodium carboxymethyl cellulose/pectin blend-based polymer electrolyte for EDLC application

Glycerolized Li+ Ion Conducting Chitosan-Based Polymer Electrolyte for Energy Storage EDLC Device Applications with Relatively High Energy Density

Environmentally friendly plasticized electrolyte based on chitosan (CS): Potato starch (PS) polymers for EDLC application: Steps toward the greener energy storage devices derived from biopolymers

Flexible electric double-layer capacitors fabricated with micro-/mesoporous carbon electrodes and plastic crystal incorporated gel polymer electrolytes containing room temperature ionic liquids

Preparation of methyl grafted natural rubber and its application in super capacitor electrolytes

Cellulose acetate-based polymer electrolyte for energy storage application with the influence of BaTiO3 nanofillers on the electrochemical properties: A progression in biopolymer-EDLC technology

Improving EDLC Device Performance Constructed from Plasticized Magnesium Ion Conducting Chitosan Based Polymer Electrolytes via Metal Complex Dispersion

Zinc oxide nanofiller-based composite polymer gel electrolyte for application in EDLCs

High Performance Electrospun Li+-functionalized Sulfonated Poly(ether Ether Ketone)/pva Based Nanocomposite Gel Polymer Electrolyte for Solid-State Electric Double Layer Capacitors.

Large-area, all-solid and flexible electric double layer capacitors based on CNT fiber electrodes and polymer electrolytes

Conducting Carbon Black Nano‐Filler Doped Polymer Electrolyte for Electrochemical Application