Abstract:This paper aims to investigate the cyclic performance of the connections between the recycled aggregate concrete (RAC) column and steel H-beam. In this connection system, the steel beam is welded to the end plate as an integral unit and bolted to the column. The seismic performance differences between the novel casing-type one-side bolted end-plate connection and the conventional all-welded joint with external diaphragm and top-seat angle connection were examined. Subsequently, three types of joints with different connection details were designed and fabricated at a reduced scale of 1:2, following the principle of strong columns and weak beams. Through beam-end loading, the low-cyclic lateral loading test was performed to observe the loading process and failure morphology of the joint model. The load-beam end displacement hysteresis curve and the skeleton curve were obtained to analyze the joint load eigenvalues, ductility, energy dissipation, and stiffness degradation. The experimental results showed that the initial stiffness and peak strength of the casing-type one-side bolted end-plate connection were between that of the all-welded joint with external diaphragm and top-seat angle connection. All three specimens exhibited beam-end failure, with saturated load–displacement hysteresis curves. The displacement ductility coefficients were in the range of 2.66–2.88, and the ultimate elastic–plastic drift ratio was about 5.9–6.2%. Furthermore, a finite element model was established. The effects of axial compression ratio ( n = 0.2–0.8), steel tube width-to-thickness ratio ( B / t s = 35.7–83.3), outer tube ( t w = 3–7 mm), and end-plate thickness ( t d = 10–20 mm) on the bearing performance of the outer tube one-side bolted end-plate joint under lateral loading were analyzed. It was demonstrated that the load-carrying capacity of the specimen was significantly affected by the thickness of the outer tube and end-plate thickness, while the effect of the variation of the axial load level was small.

Effect of recycled aggregate concrete on the seismic behavior of DfD beam-column joints under cyclic loading

Seismic Performance of Circular Recycled Aggregate Concrete-Filled Steel Tubular Columns: FEM Modelling and Sensitivity Analysis

FEM analysis of reinforced RAC columns under cyclic loading : preliminary results

A review of experimental results on structural performance of reinforced recycled aggregate concrete beams and columns

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Performance of Recycled Aggregate Concrete in A Real Project

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Performance of Recycled Concrete Beams under Sustained Loads Coupled with Chloride Ion (cl−) Ingress

Seismic Behavior of Concrete-Filled Circular Steel Tubular Column–Reinforced Concrete Beam Frames with Recycled Aggregate Concrete

Cyclic behavior of concrete-filled steel tubular column–reinforced concrete beam frames incorporating 100% recycled concrete aggregates

STRUCTURAL BEHAVIOUR OF RECYCLED AGGREGATE CONCRETE BEAMS FLEXURAL STRENGTHENED WITH CFRP SHEETS UNDER MONOTONIC AND FATIGUE LOADING

Experimental and numerical investigation of H-beam to recycled aggregate concrete column edge connections under cyclic loading

Experimental study on seismic behavior of recycled aggregate concrete infilled profile steel structures

Study on Seismic Performance of Recycled Steel Fibers Locally Reinforced Cruciform Concrete Frame Beam-Column Joint

Seismic behavior of steel-reinforced recycled concrete inner-beam–column connection under low cyclic loads

Seismic performance of conrete‐filled steel tube column‐reinforced concrete beam frame using 100% recycled coarse aggregate

Structural Behaviour of Composite Members with Recycled Aggregate Concrete — An Overview

Seismic experiment and performance index studies on recycled aggregate concrete filled steel tube frames infilled with recycled hollow block filler walls

Flexural Performance of CFDST Beams Using Recycled Aggregate Concrete

Effect of Treated/Untreated Recycled Aggregate Concrete: Structural Behavior of RC Beams

Shear behavior analysis and capacity prediction for the steel fiber reinforced concrete beam with recycled fine aggregate and recycled coarse aggregate