Abstract:Nickel-titanium alloys used in dentistry have a variety of mechanical, chemical, and biofunctional properties that are dependent on the manufacturing process. The aim of this study was to compare the mechanical and biofunctional performances of a nickel-titanium alloy produced by the continuous casting method (NiTi-2) with commercial nitinol (NiTi-1) manufactured by the classical process, i.e., from remelting in a vacuum furnace with electro-resistive heating and final casting into ingots. The chemical composition of the tested samples was analyzed using an energy dispersive X-ray analysis (EDX) and X-ray fluorescence (XRF). Electron backscatter diffraction (EBSD) quantitative microstructural analysis was performed to determine phase distribution in the samples. As part of the mechanical properties, the hardness on the surface of samples was measured with the static Vickers method. The release of metal ions (Ni, Ti) in artificial saliva (pH 6.5) and lactic acid (pH 2.3) was measured using a static immersion test. Finally, the resulting corrosion layer was revealed by means of a scanning electron microscope (SEM), which allows the detection and direct measurement of the formatted oxide layer thickness. To assess the biocompatibility of the tested nickel-titanium alloy samples, an MTT test of fibroblast cellular proliferation on direct contact with the samples was performed. The obtained data were analyzed with the IBM SPSS Statistics v22 software. EDX and XRF analyses showed a higher presence of Ni in the NiTi-2 sample. The EBSD analysis detected an additional NiTi2-cubic phase in the NiTi-2 microstructure. Additionally, in the NiTi-2 higher hardness was measured. An immersion test performed in artificial saliva after 7 days did not induce significant ion release in either group of samples (NiTi-1 and NiTi-2). The acidic environment significantly increased the release of toxic ions in both types of samples. However, Ni ion release was two times lower, and Ti ion release was three times lower from NiTi-2 than from NiTi-1. Comparison of the cells' mitochondrial activity between the NiTi-1 and NiTi-2 groups did not show a statistically significant difference. In conclusion, we obtained an alloy of small diameter with an appropriate microstructure and better response compared to classic NiTi material. Thus, it appears from the present study that the continuous cast technology offers new possibilities for the production of NiTi material for usage in dentistry.

The Effect of Two-Stage Acid Treatment on Surface Behavior and Improvement of Bioactivity of Nitinol Alloy

Surface characteristics, corrosion and bioactivity of chemically treated biomedical grade NiTi alloy

A review on surface modification of NiTinol for biomedical applications

Enhanced Bacteriostatic Properties of Ti Alloys by Surface Nitriding

Enhanced in Vitro Biocompatibility of Ultrafine-Grained Biomedical NiTi Alloy with Microporous Surface

Research Progress in the Surface Modification of NiTi Alloy Based Biomedical Materials

Dealloying and Polydopamine/silver Coating on NiTi Alloy for Improved Antibacterial Activity

Optimizing alkaline hydrothermal treatment for biomimetic smart metallic orthopedic and dental implants

Effect on Bacterial Adhesion of Dental Medical Ni-Ti and Ni-Cr Alloy Surface with TiN Coating

Experimental Investigation of the Biofunctional Properties of Nickel-Titanium Alloys Depending on the Type of Production

Progress on Surface Modification of Biomedical NiTi Alloy

Surface Modification of Ti6Al4V Based on Ultrasonic Surface Rolling Processing and Plasma Nitriding for Enhanced Bone Regeneration

Surface modification and biocompatibility of medical nickel-titanium shape memory alloys

Influence of metal oxides on biocompatibility of additively manufactured NiTi

Surface Characteristics, Biocompatibility, And Mechanical Properties Of Nickel-Titanium Plasma-Implanted With Nitrogen At Different Implantation Voltages

Surface Amorphization of NiTi Alloy Induced by Ultrasonic Nanocrystal Surface Modification for Improved Mechanical Properties.

Remarkable biocompatibility enhancement of porous NiTi alloys by a new surface modification approach: in-situ nitriding and in vitro and in vivo evaluation.

Development of a Bioactive Titanium Surface via Alkalinization and Naringenin Coating for Peri-Implant Repair: In Vitro Study

Effect of nitride film coatings on cell compatibility

Silver and Copper Coating Effects on Surface Morphology, Crystal Structure and Corrosion Behavior of NiTinol Shape Memory Alloy Plate

Nickel Release Behavior and Surface Characteristics of Porous NiTi Shape Memory Alloy Modified by Different Chemical Processes.