Abstract:Purpose This paper aims to study the effects of inorganic CaCO 3 nanoadditives in the polylactic acid (PLA) matrix and fused filament fabrication (FFF) process parameters on the mechanical characteristics of 3D-printed components. Design/methodology/approach The PLA filaments containing different levels of CaCO 3 nanoparticles have been produced by mix-blending/extrusion process and were used to fabricate tensile and three-point bending test samples in FFF process under various sets of printing speed (PS), layer thickness (LT), filling ratio (FR) and printing pattern (PP) under a Taguchi L27 orthogonal array design. The quantified values of mechanical characteristics of 3D-printed samples in the uniaxial and the three-point bending experiments were modeled and optimized using a hybrid neural network/particle swarm optimization algorithm. The results of this hybrid scheme were used to specify the FFF process parameters and the concentration of nanoadditive in the matrix that result in the maximum mechanical properties of fabricated samples, individually and also in an accumulative response scheme. Diffraction scanning calorimetry (DSC) tests were conducted on a number of samples and the results were used to interpret the variations observed in the response variables of fabricated components against the FFF parameters and concentration of CaCO 3 nanoadditives. Findings The results of optimization in an accumulative scheme showed that the samples of linear PP, fabricated at high PS, low LT and at 100% FR, while containing 0.64% of CaCO 3 nanoadditives in the matrix, would possess the highest mechanical characteristics of 3D-printed PLA components. Originality/value FFF is a widely accepted additive manufacturing technique in production of different samples, from prototypes to the final products, in various sectors of industry. The incorporation of chopped fibers and nanoparticles has been introduced recently in a few articles to improve the mechanical characteristics of produced components in FFF technique. However, the effectiveness of such practice is strongly dependent on the extrusion parameters and composition of polymer matrix.

Influence of Nano Silica on Mechanical and Tribological Properties of Additive Manufactured PLA Bio Nanocomposite

Mechanical and Wear Characteristics Investigation on 3D Printed Silicon Filled Poly (Lactic Acid) Biopolymer Composite Fabricated by Fused Deposition Modeling

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

Optimization of nano-graphene loading in PLA-graphene composites for fused deposition modeling based application

PLA based biodegradable bionanocomposite filaments reinforced with nanocellulose: development and analysis of properties

Effect of nano-SiO2 on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite

Mechanical Properties and Assessment of PLA Mixed with Carbon by Using Additive Manufacturing

A Surface Modification of Polylactic Acid Composites for Additive Manufacturing with Modified Chopped Carbon Fiber and Modified Nano‐hydroxyapatite

Evaluation of polylactic acid polymer composites strengthened with chopped vetiver fiber and pearl millet-derived- nano silica towards environmental sustainability

On the Mechanical Response of Silicon Dioxide Nanofiller Concentration on Fused Filament Fabrication 3D Printed Isotactic Polypropylene Nanocomposites

Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites

PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications

Mechanical, wear, fatigue, and water absorption behavior of proso millet husk derived biosilica reinforced nylon 6–6 composite thick plates for friction stir welding process

Effect of process parameters on mechanical and tribological characteristics of FDM printed glass fiber reinforced PLA composites

Development and characterization of groundnut shell‐derived biocarbon‐reinforced polylactic acid composite filaments for FDM

Processing Biodegradable Fused Filament Fabrication Waste with Micro-Silica Particles

Tribological Performance of Additive Manufactured PLA-Based Parts

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

A hybrid ANN/PSO optimization of material composition and process parameters for enhancement of mechanical characteristics of 3D-printed sample

Numerical Calculation and Properties Study on Polylactic Acid (Pla)/nano-Hydroxyapatite (N-Ha) Composite Fluid 3D Printed by Fused Deposition Modeling

Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality