Abstract:The p–i–n photocathode architectures for Sb2(S, Se)3 devices are rarely reported as growth of Sb2(S, Se)3 strongly depends on the substrate. Herein, a comparison between three hole‐transporting layers as the underlying substrate reveals the superior properties of CuI over CuS and NiO. The improvement is attributed to the compact morphology of the Sb2(S, Se) films. Sb2(S, Se)3 is a promising photocathode for photoelectrochemical (PEC) conversion of solar energy to hydrogen due to its excellent optoelectronic properties, stability, and low toxicity. For such applications, a p–i–n device architecture is favorable for efficient charge separation, with the p‐type layer improving hole extraction while the n‐type layer facilitates electron injection into the electrolyte for hydrogen evolution reaction. However, the lack of suitable p‐type layers for depositing a uniform layer of Sb2(S, Se)3 photocathode constrains the device architectures for PEC water splitting. In this work, various p‐type materials (e.g., NiO, CuS, and CuI) are investigated. Photocathodes fabricated on CuI demonstrate superior performance due to improved hole extraction and uniform growth of Sb2(S, Se)3 absorber layer. The Se/S ratio is adjusted to further fine‐tune the photocathode's absorption, influencing the efficiency of charge carriers' injection and separation. The overall PEC performance reaches the maximum value when Se/S = 20%, achieving up to 4.2 mA cm−2 with stable photocurrents sustained for 120 min under standard illumination conditions, achieving the highest‐reported photocurrent among S‐rich‐solution‐processed Sb2(S, Se)3 photocathodes. In this work, new avenues are opened for the design of p–i–n Sb2(S, Se)3 PEC devices.

Analysis of the physical and photoelectrochemical properties of c-Si(p)/a-SiC:H(p) photocathodes for solar water splitting

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Designing Efficient Solar-Driven Hydrogen Evolution Photocathodes Using Semitransparent Moq(X)Cl(Y) (Q = S, Se) Catalysts on Si Micropyramids

Demonstration of Irradiation-Resistant 4H-Sic Based Photoelectrochemical Water Splitting

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Unveiling the Dual Impact of CuI Layer and Se Content in Sb2(S, Se)3 Photocathodes for Solar Water Splitting

Inverted Pyramid Textured P-Silicon Covered with Co2P As an Efficient and Stable Solar Hydrogen Evolution Photocathode

A Transparent, High‐Performance, and Stable Sb2S3 Photoanode Enabled by Heterojunction Engineering with Conjugated Polycarbazole Frameworks for Unbiased Photoelectrochemical Overall Water Splitting Devices

Transparent, High‐Performance and Stable Sb2S3 Photoanode Enabled by Heterojunction Engineering with Conjugated Polycarbazole Frameworks for Unbiased Photoelectrochemical Overall Water Splitting Devices

Improving Silicon Photocathode Performance for Water Reduction through Dual Interface Engineering and Integrating ReS 2 Photocatalyst

Single-Crystal Integrated Photoanodes Based on 4 H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity

High‐Performance Si Photocathode Enabled by Spatial Decoupling Multifunctional Layers for Water Splitting

Dissolution-Induced Surface Reconstruction of Ni0.95Pt0.05Si/p-Si Photocathode for Efficient Photoelectrochemical H2 Production

A Stable and Efficient Photocathode Using an Sb2S3 Absorber in a Near-Neutral Electrolyte for Water Splitting

Spatial decoupling of light absorption and reaction sites in n-Si photocathodes for solar water splitting

Fabrication and Performance of 3c–sic Photocathode Materials for Water Splitting

Metal Chalcogenides on Silicon Photocathodes for Efficient Water Splitting: A Mini Overview

General In Situ Photoactivation Route with IPCE over 80% toward CdS Photoanodes for Photoelectrochemical Applications

A new SiP QDs/TiO2 NRs composite catalyst with Al2O3 passivation layer for enhanced photoelectrochemical water splitting

Enhanced Capability of Hydrogen Evolution Photocathode by Laminated Interface Engineering of Co/MoS 2 QDs/pyramid-black Si