Abstract:Tandem solar cells are one of the fastest‐growing PV technology, since, it efficiently overcomes the thermalization and non‐absorption losses. However, appropriate absorber materials with suitable bandgaps are required to design an efficient tandem solar cell. In this context, the present research paper brings forth the results of simulation‐based studies carried out on thin‐film/CQD based 2‐T monolithic tandem solar cell that can be processed easily at a reduced cost. The device has been designed using a‐Si: H of wide bandgap (1.7eV) as top cell and PbS CQD of narrow bandgap (1.2eV) as the bottom cell. The feasibility of the proposed design is investigated in two steps. Initially, top and bottom subcell are designed and calibrated to have state of the art conversion efficiency of 6.86% and 9.38%, respectively in accordance with the previous literature. Afterwards, the bottom cell is inverted to get the desired direction of electron flow in accordance with the top cell. The thickness of the inverted bottom cell has been optimized as 200 nm so as to obtain 8.34% efficiency. Standalone condition reflected JSC and VOC of 9.97 mA.cm−2 and 0.91 V in top cell, and 21.28 mA.cm−2 and 0.63 V in the bottom cell. Further, both the top and bottom subcells are evaluated for tandem configuration with the help of ITO based interlayer to provide the current matching conditions. In the proposed tandem design, the thickness of the absorber layers is optimized to achieve the highest JSC, which is indeed limited by the top cell owing to lower JSC value of 10.61 mA.cm−2 in standalone condition. Optimized tandem design with 200 nm/150 nm thick absorber layer based top/bottom subcell resulted in JSC of 10.52 mA.cm−2, VOC of 1.59 V, FF of 71.65% and PCE of 12.02%.This article is protected by copyright. All rights reserved.

Simulation Engineering in Quantum Dots for Efficient Photovoltaic Solar Cell Using Copper Iodide as Hole Transport Layer

Si Solid-State Quantum Dot-Based Materials for Tandem Solar Cells.

Silicon Quantum Dot Based Solar Cells: Addressing the Issues of Doping, Voltage and Current Transport

Improved Nanocrystal Formation, Quantum Confinement and Carrier Transport Properties of Doped Si Quantum Dot Superlattices for Third Generation Photovoltaics

Performance optimization of efficient PbS quantum dots solar cells through numerical simulation

Performance enhancement of PbS‐TBAI quantum dot solar cell with MoTe2 as hole transport layer

A Comparative Study of Quantum Dot Solar Cell with Two Different ETLs of WS2 and IGZO Using SCAPS-1D Simulator

The Effect of Quantum Dots on the Performance of the Solar Cell

Studies on copper indium selenide/Zinc sulphide semiconductor quantum dots for solar cell applications

Simulation study of defect density on the performance of quantum dot solar cell with PTAA HTL layer using SCAPS-1D

Sulfur-Infused Hole Transport Materials to Overcome Performance-Limiting Transport in Colloidal Quantum Dot Solar Cells

A Chemically Orthogonal Hole Transport Layer for Efficient Colloidal Quantum Dot Solar Cells

CsPbI3-Perovskite Quantum Dot Solar Cells: Unlocking Their Potential through Improved Absorber Layer Characteristics and Reduced Defects

Design and simulation of a highly efficient CuBi2O4 thin-film solar cell with hole transport layer

Design and simulation of Cu2SnSe3-based solar cells using various hole transport layer (HTL) for Performance Efficiency above 32%

Next Generation Quantum Dots Based Multijunction Photovoltaics

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

Carrier Management via Integrating InP Quantum Dots into Electron Transport Layer for Efficient Perovskite Solar Cells

Investigating the effect of different quantum dots on the absorption spectrum and characteristics of quantum dot sensitized solar cells

Hydroxyl-Terminated CuInS2-Based Quantum Dots: Potential Cathode Interfacial Modifiers for Efficient Inverted Polymer Solar Cells.