Abstract:Parameters within wireless power transfer (WPT) systems could vary for different reasons. On one hand, mutual inductances and load conditions could vary due to different operating points of the WPT system. On the other hand, the values of capacitors within the WPT system could also vary due to aging issues. Identifying those parameters is of great importance to ensure highly efficient, controllable, and reliable operation for WPT systems. However, those parameters are strongly coupled within the system and are quite challenging to be estimated at the same time. This paper proposes a model based method to estimate all the parameters of interest, including mutual inductances, load condition, and all the capacitances, for multi-coil WPT systems with 2 transmitting coils (2TX) and 1 receiving coil (1RX). Specifically, to overcome the challenge of estimating many parameters at the same time, the idea of “mode switching” is applied to greatly improve the redundancy of the parameter identification problem. Auxiliary standard capacitors are introduced into the system to enable the switching of different operating modes. Afterward, a mathematical model is established to describe the physical laws among all the interested parameters in each mode, including the fundamental frequency and harmonic components. Finally, a standard solve procedure is introduced to solve the nonlinear model and calculate the parameters. The method only requires transmitter side measurements, without any information from the receiver side. Experiments conducted on a prototype of a 2TX-1RX LCC-S WPT system verified the effectiveness of the proposed parameter identification method.

Parameter identification of capacitive transfer system based on Fitting Algorithm

A New Simultaneous Wireless Power and Information Transfer System with Integrated Signal Magnetic Coupler.

Analysis on Characters of Contactless Power Transferring Systems in Undersea Applications

An Improved Design Method Based on a Multi-Plate Coupler Structure for Capacitive Power Transfer with Wide Ranges of Misalignment and Loads

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

A Nonmonotonic Parameter Design Approach for Compact Capacitive Power Transfer

A Two-Stage Parameter Optimization Method for Capacitive Power Transfer Systems

Mode Switching Based Parameter Identification for 2TX-1RX Wireless Power Transfer Systems

Parameter Identification of Power Electronic Circuits Based on Hybrid Model

Optimal parameters design for series-series resonant converter for wireless power transfer

Modeling and Parameter Identification of DC/DC Converters in Both CCM and DCM Mode

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

Multiple Parameters Estimation Based On Transmitter Side Information In Wireless Power Transfer System

Mutual Inductance Identification of IPT System Based on Soft-Start Process

A Digital Twin Based Real-Time Parameter Identification for Mutual Inductance and Load of Wireless Power Transfer Systems

Remaining Opportunities in Capacitive Power Transfer Based on Duality with Inductive Power Transfer

A Parameter Identification Approach in Inductive Power Transfer Systems for Light Electric Vehicles

Network Parameter Identification and Estimation Based on Hybrid Measurement of WAMS/SCADA

A Selection Method of Mutual Inductance Identification Models Based on Sensitivity Analysis for Wireless Electric Vehicles Charging

Design of CPT System With Multiple Constant Output Voltage Pickups Using Inverse Hybrid Parameters of Capacitive Coupler

Research and Application of Capacitive Power Transfer System: A Review