Abstract:An original methodology based on the use of experimental values of the conditional equilibrium constants in metallurgical calculations was employed to perform a theoretical modeling of the exchange interactions in melts formed during joint matte smelting of oxidized saprolite nickel ore and a product (cinder) of partial oxidizing roasting of pyrrhotite concentrate. It is shown that heating of the ore-cinder mixture (mass ratio ≈1.0) to 1,300°C will ensure the separation of the slag and matte phases with the optimal process parameters. The proposed smelting conditions were tested experimentally, the material composition of the products was studied by X-ray fluorescence and X-ray powder diffraction analyses, and the possibility of obtaining results close to those predicted theoretically was confirmed. By using a flux-free smelting (at 1,400°C) of the mixture, it became possible to convert at least 76.1% nickel, 79.9% cobalt, and 62.8% copper to matte, containing (wt.%): Ni — 8.4, Co — 0.39, Cu — 0.5, Fe — 56.8, S — 25.6, and O — 7.2. 75.3% of the matte phase consists of iron monosulfides, including nickeliferous pyrrhotites (Fe 17.574 Ni 0.24 S 20 and Fe 2.747 Ni 0.253 S 3 ). Cobalt is present as jaipurite (CoS), and copper is dissolved in pyrite (Cu 0.25 Fe 0.75 S 2 ) and in metallic iron (Cu 0.003 Fe 0.997 ). Low contents of non-ferrous metals in slag (0.24 wt.% Ni, 0.08 wt.% Co, and 0.04 wt.% Cu) are associated with the presence of significant amounts of metasilicates and free SiO 2 in the slag composition. A sufficient matte separation factor (5.5 for nickel, 5.7 for cobalt, and 4.5 for copper) and reduced desulfurization (≈0%) confirm the selected optimal conditions of joint ore-cinder smelting. The applied methodology of theoretical modeling and the obtained results can be used in the development of technologies for processing mineral and technogenic raw materials with low copper and nickel contents.

Thermodynamic Modelling of Molybdenite Roasting in a Multiple-Hearth Furnace

Thermodynamic modelling of roasting of molybdenum sulphide concentrate with calcium hydroxide

Removal Mechanism of Mineral Impurities in Molybdenum Concentrate Treatment Process

Thermodynamic modelling of liquid slag-matte-metal equilibria applied to the simulation of the Peirce-Smith converter

Modeling of Exchange Interactions in Melts Formed During Joint Smelting of Oxidized Nickel Ores and Pyrrhotite Concentrates

Mathematical Model of Multistage and Multiphase Chemical Reactions in Flash Furnace

A finite-element method model for a ferromanganese and silicomanganese pilot furnace

Numerical Model For Short-Time High-Temperature Isothermal Oxidation of Fe–Mn Binaries at High Oxygen Partial Pressure

Numerical Modeling of the Iron Ore Sintering Process

Mathematical modeling of thermal behavior of single iron ore pellet during heat hardening oxidation

"THERMODYNAMIC MODELING OF THE SMELTING PROCESS OF A NEW COMPLEX CHROMIUM-MANGANESE-SILICON CONTAINING FERROALLOY"

Mathematical modeling of combustion in a grate-fired boiler burning straw and effect of operating conditions under air- and oxygen-enriched atmospheres

Authentication of emission monitoring data and optimization of desulfurization in the molybdenum roasting process based on BAT-OOPN and the response surface method

Leaching and Kinetic Modelling of Molybdenite Concentrate Using Hydrogen Peroxide in Sulfuric Acid Solution

Mathematical Modeling of Fluidized Bed Magnetizing Roasting of Iron Ore Fines

Sintering Behavior of Molybdenite Concentrate During Oxidation Roasting Process in Air Atmosphere: Influences of Roasting Temperature and K Content

Detailed Modeling of the Direct Reduction of Iron Ore in a Shaft Furnace

Experimental Validation is Always Required for Molten Oxide Electrolysis Laboratory Crucibles

Thermodynamics Evaluation and Verification of High-Sulfur Copper Slag Composite Agglomerate in Oxidation-Roasting-Separation-Leaching Process

Mathematical modeling of the reaction in an iron ore pellet using a mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: an isothermal study

Modeling of Thermochemical Behavior in an Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling