Abstract:Polyimide (PI) has been widely used in aerospace, electronic information, novel energy, and other industries due to its excellent high- and low-temperature, radiation, and chemical corrosion resistance. However, the use of electrospun PI separators in lithium-ion batteries (LIBs) is limited due to their poor electrolyte wettability and insufficient mechanical strength. Inorganic materials such as aluminide have typically been used in the coating composition of PI separators. To investigate the effects of different aluminide components, in this work, PI materials were prepared by the complexation–hydrolysis method and used as separators for LIBs. The physicochemical and electrochemical properties of the different nanofiber membranes were studied by adjusting the calcination temperature. The results showed that the sample with the highest tensile strength was 107.6 MPa, which is close to the commercial polyolefin separator. When the calcination temperature increased to 300 °C and then exceeded 400 °C, the aluminide shell initially transformed into thin boehmite and then into γ-Al2O3 phases. The mechanical properties of the nanofiber membranes were enhanced, and the wettability and electrochemical characteristics also improved to some extent. Furthermore, the nanofiber structure was destroyed at 500 °C and could not meet the long-term battery cycles. Therefore, when the calcination temperature was controlled between 300 °C and 400 °C, the aluminide-armored PI nanofiber membranes exhibited better comprehensive performance and were suitable for use as separators in LIBs, which was of great significance for improving the safety and stability of LIBs, especially power batteries.

Recent developments of polyimide materials for lithium-ion battery separators

Progress in polymeric separators for lithium ion batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Poly(m-phenylene isophthalamide) separator for improving the heat resistance and power density of lithium-ion batteries

Polyimide separators for rechargeable batteries

Polyimides as Promising Materials for Lithium-Ion Batteries: A Review

Polyimide-Based Materials for Lithium-Ion Battery Separator Applications: A Bibliometric Study

Review on current development of polybenzimidazole membrane for lithium battery

Preparation of PEI-modified PI separators for advanced lithium ion batteries

WO3-composited polyimide nanofibrous separator with superior mechanical properties and high capacity for lithium-ion batteries

In situ aluminide armored polyimide nanofiber separators with ultrahigh strength and high wettability for advanced lithium-ion batteries

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

Recent Progress of Poly (P-Phenylene Terephthalamide) Separator for Lithium Ion Battery

Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries

Hexagonal Boron Nitride-Coated Polyimide Ion Track Etched Separator with Enhanced Thermal Conductivity and High-Temperature Stability for Lithium-Ion Batteries

Zwitterion grafted polyimide separator for improving lithium-ion transport and its application in LiCoO 2 batteries

Novel Thermotolerant and Flexible Polyimide Aerogel Separator Achieving Advanced Lithium‐Ion Batteries

Robust, High-Temperature-Resistant Polyimide Separators with Vertically Aligned Uniform Nanochannels for High-Performance Lithium-Ion Batteries

Recent Advances on Biopolymer Fiber Based Membranes for Lithium-Ion Battery Separators

Advanced Separators for Lithium-Ion and Lithium-Sulfur Batteries: A Review of Recent Progress