Abstract:Degumming bast fibers by organic solvents has been a promising method in recent years due to easy recovery and reuse of organic solvents. In this research, the possibility of ramie fiber degumming by glycol and a combination of acetic acid with glycol was studied, in which two steps were involved in the degumming process: distilled water boiling pretreatment and organosolv treatment by a combination of glycol/acetic acid (100/0, 90/10, 80/20, 70/30, 60/40, 50/50). Results displayed that the pretreatment could remove 6.99% of hemicellulose, 0.59% of lignin and 36.26% of other gums compared with raw ramie. While with organosolv treatment (130 °C, 6 h), fibers treated by glycol/acetic acid (50/50) had the best effect of removing gums. The hemicellulose and lignin content of fibers reduced by 44.81% and 54.12%, respectively (compared with raw ramie), while the residual gum content still failed to meet the requirements of spinning process. Besides, the tenacity of glycol/acetic acid treated fibers was lower than that of only glycol treated fibers (4.67 cN/dtex). Considering that the addition of acid could cause a decrease in fiber tenacity, the step of organosolv (only glycol) treatment was optimized by altering the degumming condition. The tenacity, linear density, non-cellulosic component ratio of fibers treated with the optimized condition (200 °C, 80 min) were 6.53 cN/dtex, 6.06 dtex, 5.78%, respectively, which met the needs of industrial production. Compared with the organosolv treated fibers, these properties of fibers with traditional alkaline treatment were better, but the yield (62.4%) was much lower than that of fibers treated with glycol in two degumming condition (77–82%). Considering impressive properties of the treated ramie, the method of organosolv degumming with high degumming efficiency and environmental protection would bring an innovative thought for natural fiber isolation.Graphic abstract

One-step extraction of ramie cellulose fibers and reutilization of degumming solution

High-efficiency and recyclable ramie cellulose fiber degumming enabled by deep eutectic solvent

Process optimization and comprehensive utilization of recyclable deep eutectic solvent for the production of ramie cellulose fibers

A high-efficiency and eco-friendly degumming process for ramie fibers

Isolation and characterization of cellulosic fibers from ramie using organosolv degumming process

Ramie-degumming methodologies: A short review

High-efficiency Ramie Fiber Degumming and Self-Powered Degumming Wastewater Treatment Using Triboelectric Nanogenerator

A new strategy to improve ramie degumming based on removal of the xylan branched structure

High-efficiency and recyclability of ramie degumming catalyzed by FeCl3 in organic solvent

Visual degumming process of ramie fiber using a microbial consortium RAMCD407

Comparison of Deep Eutectic Solvents on Pretreatment of Raw Ramie Fibers for Cellulose Nanofibril Production

Trend of ramie industry development: A review of green degumming and the utilization of processing residues

Engineering of a Bacillus subtilis Strain Deficient in Cellulase: Application in Degumming of Ramie

Eco-friendly Process to Degum Flax Roving with Deep Eutectic Solvent and Microbial Treatment

An alkali-free method to manufacture ramie fiber

Visually Revealing the Ramie Bast Structure and Its Obstructive Effects on Bio-Degumming

Degumming of ramie fibers by alkalophilic bacteria and their polysaccharide-degrading enzymes

Combined effects of deep eutectic solvent and microwave energy treatments on cellulose fiber extraction from hemp bast

Direct pretreatment of raw ramie fibers using an acidic deep eutectic solvent to produce cellulose nanofibrils in high purity

Optimization of enzymatic ramie degumming using thermoalkaliphilic xylanase from Bacillus halodurans CM1 and a commercial pectinase

Evaluation of Aqueous Ammonia Degumming of Ramie Fiber and Recyclability of Black Liquor