Abstract:This protocol demonstrates a method for ramie fiber extraction by scouring raw ramie in an alkali hydrogen peroxide system supported by a controlled-release alkali source. The fiber extracted from ramie is a type of textile material of great importance. In previous studies, ramie fiber was extracted in an alkali hydrogen peroxide system supported only by sodium hydroxide.However, due to the strong alkalinity of sodium hydroxide, the oxidation reaction speed of hydrogen peroxide was difficult to control and thus resulted in great damage to the treated fiber. In this protocol, a controlled-release alkali source, which is composed of sodium hydroxide and magnesium hydroxide, is used to provide an alkali condition and buffer the pH value of the alkali hydrogen peroxidesystem. The substitution rate of magnesium hydroxide can adjust the pH value of the hydrogen peroxide system and has great influence on the fiber properties. The pH value and oxidation-reduction potential (ORP) value, which represents the oxidation ability of alkali hydrogen peroxide system, were monitored using a pH meter and ORP meter, respectively. The residual hydrogen peroxide content in the alkali hydrogen peroxide system during the extraction process and the chemical oxygen demand (COD) value of wastewater after fiber extraction are tested by KMnO4 titration method. The yield of fiber is measured using a precision electronic balance, and residual gums of fiber are tested by a chemical analysis method. The polymerization degree (PD value) of fiber is tested by an intrinsic viscosity method using the Ubbelohde viscometer. The tensile property of fiber, including tenacity, elongation, and rupture, is measured using a fiber strength instrument. Fourier transform infrared spectroscopy and X-ray diffraction are used to characterize the functional groups and crystal property of fiber. This protocol proves that the controlled-release alkali source can improve the properties of the fiber extracted in an alkali hydrogen peroxide system.

High-efficiency and recyclability of ramie degumming catalyzed by FeCl3 in organic solvent

A high-efficiency and eco-friendly degumming process for ramie fibers

Isolation and characterization of cellulosic fibers from ramie using organosolv degumming process

High-efficiency and recyclable ramie cellulose fiber degumming enabled by deep eutectic solvent

Visual degumming process of ramie fiber using a microbial consortium RAMCD407

On the Flameproof Treatment of Ramie Fabrics Using a Spray-Assisted Layer-by-layer Technique

Process optimization and comprehensive utilization of recyclable deep eutectic solvent for the production of ramie cellulose fibers

One-step extraction of ramie cellulose fibers and reutilization of degumming solution

Ramie-degumming methodologies: A short review

An alkali-free method to manufacture ramie fiber

Trend of ramie industry development: A review of green degumming and the utilization of processing residues

Degumming of ramie fibers by alkalophilic bacteria and their polysaccharide-degrading enzymes

Extraction of Ramie Fiber in Alkali Hydrogen Peroxide System Supported by Controlled-release Alkali Source

Evaluation of Aqueous Ammonia Degumming of Ramie Fiber and Recyclability of Black Liquor

Optimization of enzymatic ramie degumming using thermoalkaliphilic xylanase from Bacillus halodurans CM1 and a commercial pectinase

Engineering of a Bacillus subtilis Strain Deficient in Cellulase: Application in Degumming of Ramie

Comparison of Deep Eutectic Solvents on Pretreatment of Raw Ramie Fibers for Cellulose Nanofibril Production

Study on the cationic modification and dyeing of ramie fiber

Enzymatic degumming of ramie bast fibers

Study on the performance of ramie fiber modified with ethylenediamine

Optimization of Alkali Treatment Conditions of Ramie Fabrics Using Box–Behnken Method