Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Tuned Transport Behavior of the IPA-Treated PEDOT:PSS Flexible Temperature Sensor via Screen Printing

Selectively Tuning Ionic Thermopower in All-Solid-state Flexible Polymer Composites for Thermal Sensing

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

Preparation and performance optimization of resistive flexible temperature sensors prepared by inkjet printing method

A Design of Experiments Study on Inkjet Printed PEDOT:PSS Temperature Sensors

Flexible Multifunctional Sensors Using 3-D-Printed PEDOT:PSS Composites

Development of Flexible and Wearable Temperature Sensors Based on PEDOT:PSS

A Flexible Electrochromic Device Based on PEDOT: PSS Working in Visible and Infrared Band

Improved Thermoelectric Properties and Environmental Stability of Conducting PEDOT:PSS Films Post-treated With Imidazolium Ionic Liquids

Ultrafast Laser‐Induced Excellent Thermoelectric Performance of PEDOT:PSS Films

Modified PEDOT-PSS Conducting Polymer as S/D Electrodes for Device Performance Enhancement of P3HT TFTs

PEDOT: PSS/natural rubber latex inks for screen‐printing multifunctional wearable strain‐humidity sensors

Two-step surface treatment of femtosecond laser irradiation and ionic liquid to enhance thermoelectric properties of PEDOT:PSS films

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

One-step post-treatment boosts thermoelectric properties of PEDOT:PSS flexible thin films

Fully Printed PEDOT:PSS-based Temperature Sensor with High Humidity Stability for Wireless Healthcare Monitoring

Flexible Te/PEDOT:PSS thin films with high thermoelectric power factor and their application as flexible temperature sensors

Optimization of Fabrication Process of Stretchable, Transparent PEDOT:PSS Electrodes for Optoelectronic Applications

High-sensitive Flexible Temperature Sensor with PEDOT:PSS Composites and PI Substrate for Human Body Monitoring

Green preparation of PEDOT-based composites with outstanding electrothermal heating and durable rapid-response sensing performance for smart healthcare textiles

Tuning the mechanical and thermoelectric properties of self‐standing stretchable PEDOT:PSS/SDBS films