Abstract:Abstract The catalytic conversion of waste cooking oil (WCO) was carried out over a synthetic nano catalyst of cobalt aluminate (CoAl 2 O 4 ) to produce biofuel range fractions. A precipitation method was used to create a nanoparticle catalyst, which was then examined using field-emission scanning electron microscopy, X-ray diffraction, energy dispersive X-ray, nitrogen adsorption measurements, high-resolution transmission electron Microscopy (HRTEM), infrared spectroscopy, while a gas chromatography-mass spectrometer (GC–MS) was used to analyze the chemical construction of the liquid biofuel. A range of experimental temperatures was looked at including 350, 375, 400, 425, and 450 °C; hydrogen pressure of 50, 2.5, and 5.0 MPa; and liquid hour space velocity (LHSV) of 1, 2.5, and 5 h −1 . As temperature, pressure, and liquid hourly space velocity increased, the amount of bio-jet and biodiesel fractional products decreased, while liquid light fraction hydrocarbons increased. 93% optimum conversion of waste cooking oil over CoAl 2 O 4 nano-particles was achieved at 400 °C, 50 bar, and 1 h −1 (LHSV) as 20% yield of bio-jet range,16% gasoline, and 53% biodiesel. According to the product analysis, catalytic hydrocracking of WCO resulted in fuels with chemical and physical characteristics that were on par with those required for fuels derived from petroleum. The study's findings demonstrated the nano cobalt aluminate catalyst's high performance in a catalytic cracking process, which resulted in a WCO to biofuel conversion ratio that was greater than 90%. In this study, we looked at cobalt aluminate nanoparticles as a less complex and expensive alternative to traditional zeolite catalysts for the catalytic cracking process used to produce biofuel and thus can be manufactured locally, which saves the cost of imports for us as a developing country.

Mesoporous Silica Preparation Using Sodium Bicarbonate as Template and Application of the Silica for Hydrocracking of Used Cooking Oil into Biofuel

Beach Sand-derived Mesoporous Silica by Hydrothermal Process for Hydrocracking Waste Coconut Oil to Biofuel

Catalytic Hydrocracking of Fresh and Waste Frying Oil over Ni- and Mo-Based Catalysts Supported on Sulfated Silica for Biogasoline Production

Development of chromium-impregnated sulfated silica as a mesoporous catalyst in the production of biogasoline from used cooking oil via a hydrocracking process

Preparation of Hydrocarbon Rich Biofuel from Cracking of Waste Cooking Oil Catalyzed by Basic Mesoporous Molecular Sieve Me-KIT-6

Catalytic Co-Cracking of Used Cooking Oil Methyl Ester and Polystyrene Waste for Gasoline-Rich Biofuel Over Mesoporous Al-MCM-41 Catalyst

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Mesoporous Silica from Parangtritis Beach Sand Templated by CTAB as a Support of Mo Metal as a Catalyst for Hydrocracking of Waste Palm Cooking Oil into Biofuel

Porous silica modification with sulfuric acids and potassium fluorides as catalysts for biodiesel conversion from waste cooking oils

Coprecipitation and hydrothermal synthesis of CaO from dolomite in the presence of Sapindus rarak extract for biodiesel production: catalysts characterization and optimization

Effect of La-Fe/Si-MCM-41 Catalysts and CaO Additive on Catalytic Cracking of Soybean Oil for Biofuel with Low Aromatics

Preparation of rich hydrocarbon biofuels from cracking of waste cooking oil by CaO@Zn-KIT-6

Waste cooking oil processing over cobalt aluminate nanoparticles for liquid biofuel hydrocarbons production

Facile Fabrication of SiO2/Zr Assisted with EDTA Complexed-Impregnation and Templated Methods for Crude Palm Oil to Biofuels Conversion via Catalytic Hydrocracking

Blending and emission characteristics of biogasoline produced using CaO/SBA-15 catalyst by cracking used cooking oil

Rapid synthesis of hierarchical silicoaluminophosphate molecular sieves using carbon-silicon composites from rice husk ash for deoxygenation of stearic acids

Direct synthesis of Fe-aluminosilicates from red mud for catalytic deoxygenation of waste cooking oil

Preparation of Liquid Biofuel from Catalytic Cracking of Waste Cooking Oil Using Basic Mesoporous Molecular Sieve MeO/Ca-MNC-13

Catalytic Deoxygenation of Waste Cooking Oil for Sustainable Bio-Jet Fuel: A Comparative Study of Ni-Co/SBA-15 and Ni-Co/SBA-15-SH catalysts

Hydrocracking of Waste Palm Cooking Oil into Hydrocarbon Compounds over Mo Catalyst Impregnated on SBA-15

Hydrodeoxygenation and hydrocracking to produce jet biofuel catalyzed by mesoporous zeolite desilicated with NaOH treatment